Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by STMicroelectronics, this arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Expansion Board; modulation type 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK; air data rate 0.1 to 500 kbps.

Key Highlights

  • Item Type: Expansion Board
  • Modulation Type: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
  • Air Data Rate: 0.1 to 500 kbps

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeExpansion Board
Modulation Type2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
Air Data Rate0.1 to 500 kbps
Power Consumption (W)Ultra-low, 7 mA RX and 10 mA TX at +10 dBm
Silicon ManufacturerSTMicroelectronics
Silicon Core NumberS2-LP
CompatibilitySTMicroelectronics STM32 Nucleo Development Boards
Shipping Weight0.1 kg
Shipping Dimensions23 × 17 × 4 cm

Overview

The STMicroelectronics Sub-1 Ghz 915 Mhz Rf Expansion Board, made by STMicroelectronics, is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Expansion Board
  • Modulation Type: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
  • Air Data Rate: 0.1 to 500 kbps
  • Power Consumption (W): Ultra-low, 7 mA RX and 10 mA TX at +10 dBm
  • Silicon Manufacturer: STMicroelectronics
  • Silicon Core Number: S2-LP
  • Compatibility: STMicroelectronics STM32 Nucleo Development Boards
  • Shipping Weight: 0.1 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Sub-1 GHz 915MHz RF expansion board based on S2-LP radio for STM32 Nucleo. The expansion board is compatible with ST morpho andArduino UNO R3 connectors. The X-NUCLEO-S2915A1 interfaces with the STM32 Nucleo microcontroller via SPI connections and GPIO pins. Users can change some of the GPIOs by mounting or removing the resistor. It features IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection.
Note: for more technical details go through Datasheet in the attachment section

Features:

  1. Programmable RF output power up to +27dBm
  2. 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK modulation schemes
  3. RX and TX 128byte FIFO buffers
  4. Support to wireless M-Bus
  5. Excellent performance of receiver sensitivity (up to -130dBm)

Package Includes:

1 x STMICROELECTRONICS SUB-1 GHZ 915 MHZ RF EXPANSION BOARD

Quick specs

Item Type
Expansion Board
Modulation Type
2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
Air Data Rate
0.1 to 500 kbps
Power Consumption (W)
Ultra-low, 7 mA RX and 10 mA TX at +10 dBm
Silicon Manufacturer
STMicroelectronics
Silicon Core Number
S2-LP
See all specifications