
1 / 3 · Click to enlarge
AI Summary
A tiny ATmega328P development board running at 16 MHz with Type-C USB, 14 digital I/O and 6 analog inputs. Its 23.5 x 18 mm footprint makes it a practical choice for space-limited embedded projects.
Key Highlights
- ATmega328P microcontroller with a stable 16 MHz clock
- Type-C USB interface for data communication and power
- 14 digital I/O pins and 6 analog inputs (A0 to A5)
- PWM output on multiple pins for control applications
- Compact 23.5 x 18 x 5 mm board weighing about 3 g
- UART and I2C support with SDA on A4 and SCL on A5
Ideal For
- Makers building compact sensor and logging projects
- Students learning ATmega328P embedded programming
- Engineers prototyping space-limited control boards
- Hobbyists adding PWM motor or LED control
- Developers testing I2C and UART peripherals
Buying Tip
Check that your project fits within 32KB Flash and 2KB SRAM, and plan to solder the included header pins if you need breadboard or shield mounting.
Elecvora expert review
Our verdict
A genuinely small ATmega328P board that covers the essentials: 16 MHz operation, Type-C USB and a full set of digital and analog pins. It suits compact builds well, provided you accept soldering headers and modest memory.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact 23.5 x 18 x 5 mm footprint
- Type-C USB simplifies cabling
- 14 digital and 6 analog pins cover most small projects
- PWM, UART and I2C available without extra hardware
- Lightweight at about 3 g
Cons
- Header pins arrive unsoldered
- 32KB Flash and 2KB SRAM limit larger sketches
- No mounting holes or enclosure listed
Best for
Space-limited sensor, control and learning projects
Not ideal for
Memory-heavy applications or large displays
Specifications
| Shipping Weight | 0.005 kg |
|---|---|
| Shipping Dimensions | 4 × 3 × 2 cm |
What's in the box
- 1 x SuperMini Nano V3 ATmega328P Development Board Module
- 1 x Header pin set
Frequently Asked Questions
What microcontroller does this board use?
How is the board powered?
Do the header pins come pre-soldered?
Which pins are used for I2C?
How many inputs and outputs are available?
What is included in the package?
Overview
The SuperMini Nano V3 is a compact development board built around the ATmega328P microcontroller. It runs at a stable 16 MHz clock and provides 32KB Flash, 2KB SRAM and 1KB EEPROM, giving you enough room for small firmware projects, sensor sketches and control logic. Its board measures only about 23.5 x 18 x 5 mm and weighs roughly 3 g, so it slots into builds where a full-size board would not fit.
A Type-C USB connector handles data communication and can also supply 5V power. For projects that need more headroom, the board accepts a DC input of 6 to 12V and can output 3.3V to 5V with a maximum output current of 1A at 5V.
Key Features
- ATmega328P microcontroller with 16 MHz clock frequency
- Type-C USB interface for faster, stable data transfer
- 14 digital I/O pins for switches, relays, displays and logic
- 6 analog input pins (A0 to A5) for sensors and potentiometers
- PWM support on multiple pins for dimming and motor control
- UART and I2C communication, with SDA on A4 and SCL on A5
- Expansion board compatibility for extended functionality
Specifications Explained
Memory: 32KB Flash stores your program, 2KB SRAM is working memory at runtime, and 1KB EEPROM keeps small values after power loss. This is a sensible budget for compact sketches rather than large graphical applications.
Power: The board can take 5V over USB or 6 to 12V through the DC input. It regulates down to 3.3V or 5V and can supply up to 1A at 5V, which covers most low-power sensors and small modules.
I/O: Fourteen digital pins and six analog inputs give you enough connections for mixed projects. PWM on several pins lets you fade LEDs or drive simple motor controllers without extra hardware.
Communication: UART and I2C are available for serial modules, displays and sensors, with the I2C lines fixed on A4 (SDA) and A5 (SCL).
Compatibility and Requirements
The board is listed in the boards compatible with Arduino category and uses the ATmega328P, so it suits the usual microcontroller workflow. You will need a USB Type-C cable for programming and power, and a separate DC supply if you plan to use the 6 to 12V input. Header pins are included but not pre-soldered, so basic soldering is required before use in a permanent build.
Typical Uses
- Sensor nodes and data logging prototypes
- Small robotic and motor control projects using PWM
- Wearable and space-constrained enclosures
- Learning embedded programming and I2C devices
- Rapid test rigs and breadboard experiments
What's in the Box
- 1 x SuperMini Nano V3 ATmega328P Development Board Module
- 1 x Header pin set













