Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An all-in-one flight controller and 45A ESC stack built for compact cinewhoop and toothpick FPV builds. The STM32F722 MCU, BMP280 barometer and 3-8S input make it a tidy single-board solution.

Key Highlights

  • All-in-one flight controller and 45A ESC on one compact board
  • STM32F722 main control unit for responsive flight processing
  • 45A continuous and 50A peak current for demanding FPV setups
  • BMP280 barometer provides altitude sensing data
  • 5V/1.5A BEC output for powering peripherals
  • 25.5x25.5mm M3 mounting with a lightweight 10g footprint

Ideal For

  • FPV pilots building compact cinewhoop airframes
  • Toothpick builders wanting a single-board FC and ESC solution
  • Makers assembling small 25.5x25.5mm mount frames
  • Pilots upgrading to an STM32F722 based controller
  • Hobbyists who prefer fewer solder joints and shorter wiring

Buying Tip

Confirm your frame uses a 25.5x25.5mm M3 mount and that your motors and battery are rated for the 3-8S input before buying this stack.

Elecvora expert review

Our verdict

A tidy all-in-one option for small FPV builds, pairing an STM32F722 controller with a 45A ESC and a wide 3-8S input range. It suits builders who value compact size and simple wiring over modular flexibility.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated FC and ESC reduces wiring and stack height
  • STM32F722 MCU and BMP280 barometer on board
  • 45A continuous and 50A peak current rating
  • Wide 3-8S LiPo input range
  • Lightweight 10g board with a common 25.5x25.5mm mount

Cons

  • Package contents are not specified, so included accessories must be confirmed
  • All-in-one design means a failure affects both FC and ESC
  • Requires soldering and careful current planning for your build

Best for

Compact cinewhoop and toothpick FPV builds

Not ideal for

Large frames or builds needing a different mounting pattern

Specifications

Item TypeFlight Controller, ESC
Model No. / NameF7
BEC Output5V/1.5A
BarometerBMP280
Main control (MCU)STM32F722
Continuous Discharge Current (A)45
Peak Current (A)50
Mounting Style25.5×25.5mm (M3)
Input Voltage3–8S LiPo
Length (mm)39
Width (mm)39
Weight (g)10
ManufacturerRCA Corporation
Display Resolution (pixel)1280x800
Shipping Weight0.02 kg
Shipping Dimensions6 × 6 × 3 cm

Frequently Asked Questions

What is an AIO stack?
It is a single board that combines the flight controller and the ESC, so you do not need to mount and wire two separate boards. This reduces stack height and simplifies the build.
What battery voltage can it handle?
The stated input range is 3-8S LiPo. Make sure your motors, camera and other electronics are rated for the pack you choose.
What mounting pattern does it use?
It uses a 25.5x25.5mm M3 mounting pattern, and the board measures 39x39mm. Check your frame before ordering.
What is the BEC output?
The board provides a 5V/1.5A BEC output for peripherals. Add up the current draw of connected devices and stay within that limit.
What is included in the box?
Package contents are not specified in the product data. Confirm the included items with the retailer before ordering.
How should I care for the board?
Keep it dry, avoid bending the PCB during installation, and check solder joints and polarity before applying power. Inspect after crashes for damaged components.

Overview

The T-Motor F7 45A AIO Stack puts flight control and motor drive on a single board, which simplifies wiring and saves space in small FPV frames. The main control unit is an STM32F722, paired with a BMP280 barometer for altitude data. A 5V/1.5A BEC output supplies power to connected accessories.

With a 25.5x25.5mm M3 mounting pattern, a 39x39mm board size and a weight of about 10g, this stack is aimed at compact builds where every gram and millimetre counts.

Key Features

  • Integrated design: flight controller and ESC combined, reducing stack height and wiring runs.
  • STM32F722 MCU: a capable main control unit for stabilised flight processing.
  • 45A continuous, 50A peak: headroom for aggressive throttle inputs on small FPV craft.
  • BMP280 barometer: adds barometric altitude sensing to the board.
  • 5V/1.5A BEC: a dedicated regulated output for peripherals.
  • Lightweight: roughly 10g with a compact 39x39mm footprint.

Specifications Explained

Current handling

The ESC is rated at 45A continuous with a 50A peak. Continuous rating describes sustained load, while peak covers brief bursts, so keep your motor and propeller choice within sensible limits for the airframe.

Input voltage

The board accepts 3-8S LiPo input. Match your battery to the rest of your build, and confirm your motors and other electronics are suited to the pack you intend to use.

Mounting and size

The 25.5x25.5mm M3 pattern fits frames designed for that standard. At 39x39mm and around 10g, the board leaves room for tight builds.

BEC output

The 5V/1.5A BEC provides a regulated supply for peripherals. Add up the current draw of everything you connect and stay within the stated output.

Compatibility and Requirements

This stack is intended for multirotor frames with a 25.5x25.5mm M3 mounting pattern and a 3-8S LiPo power setup. You will need a suitable radio system, motors, ESCs matching your chosen current draw, a camera and video system, and a battery. Check that every component in your build is rated for the voltage you plan to use.

Typical Uses

The compact size and integrated layout suit 2.5 to 4 inch cinewhoop and toothpick style FPV builds, where low weight and short wiring runs matter. It is also a practical choice for rebuilds of small frames that already use the 25.5x25.5mm pattern.

What's in the Box

Package contents are not specified for this listing. Confirm the included items with the retailer before ordering if you need specific accessories.

Quick specs

Item Type
Flight Controller, ESC
Model No. / Name
F7
BEC Output
5V/1.5A
Barometer
BMP280
Main control (MCU)
STM32F722
Continuous Discharge Current (A)
45
See all specifications