Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The T-Motor Navigator MN3110 700KV is a 3-6S brushless outrunner for multirotor airframes, with a 31 mm stator and 4 mm shaft. Its imported EZO bearings keep low-speed running smooth and propellers stable in flight.

Key Highlights

  • 700KV windings with 3900-7600 RPM operating range
  • 31 mm stator and 4 mm shaft for multirotor builds
  • Runs on 3-6S LiPo packs with 1.8-14A working current
  • Imported EZO bearings for smooth low-speed stability
  • Flexible mounting to fit a range of current propellers
  • Low 0.1 kg shipping weight for compact builds

Ideal For

  • Enterprise and industrial multirotor airframe builders
  • Quadcopter, tri-copter and hexacopter pilots
  • Aerial platform builders needing steady low-speed running
  • Makers assembling custom UAVs with branded components

Buying Tip

Check your propeller and cell count against the 3900-7600 RPM band and 1.8-14A current range before ordering, and confirm your ESC is rated for the load.

Elecvora expert review

Our verdict

A well-balanced brushless outrunner for enterprise and industrial multirotor builds, with imported EZO bearings supporting smooth low-speed running. It rewards careful propeller and cell matching rather than plug-and-play assembly.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Imported EZO bearings for smooth low-speed stability
  • Broad 3-6S cell support
  • Flexible mounting for a range of current propellers
  • Compact 0.1 kg shipping weight

Cons

  • Requires soldering and correct ESC matching
  • Propeller and adapter fit must be checked separately
  • No battery or ESC included

Best for

Enterprise and industrial multirotor airframes

Not ideal for

Casual plug-and-play toy drones

Specifications

Working Current (mA)1.8-14A
Power Rating19.9-207
Rated Speed (RPM)3900-7600
Efficiency14-06
Operating Temperature (°C)39-47
Shaft Diameter4 mm
Stator Size (mm)31
No. of Cells3-6S
Internal Resistance (Ohm)71
Shipping Weight0.1 kg
Shipping Dimensions8 × 6 × 4 cm

What's in the box

  • 1 x T-Motor Navigator MN3110 700KV motor

Frequently Asked Questions

What cell count does this motor support?
It runs on 3-6S LiPo packs, with a working current of 1.8-14A.
What is the shaft diameter?
The shaft is 4 mm, paired with a 31 mm stator.
What speed range does it operate in?
The rated speed band is 3900-7600 RPM at its 700KV rating.
What is included in the box?
One T-Motor Navigator MN3110 700KV motor is included.
How should I care for the motor?
Keep it within the 39-47°C operating range and check bearings and mounting regularly for smooth running.
What ESC should I use?
Choose an ESC rated comfortably above the 14A working current for your chosen propeller and cell count.

Overview

The T-Motor Navigator MN3110 700KV is a brushless outrunner aimed at multirotor airframes that demand consistent power and efficient running. It pairs a 31 mm stator with a 4 mm shaft and is rated for 3-6S packs, drawing between 1.8A and 14A while turning at 3900-7600 RPM. Imported EZO bearings are fitted to keep rotation smooth, especially at low speed, which helps propellers stay steady during flight.

This motor is intended for builders of quadcopters, tri-copters, hexacopters and similar multirotor layouts who want a reliable, well-balanced unit rather than a casual sport motor.

Key Features

  • 700KV windings for a broad 3900-7600 RPM operating band
  • 31 mm stator and 4 mm shaft suited to multirotor airframes
  • Imported EZO bearings for smooth low-speed running and propeller stability
  • 3-6S cell support with 1.8-14A working current
  • Flexible mounting to accept a range of current propellers

Specifications Explained

KV and speed

At 700KV, the motor turns faster per volt applied, and its rated speed window of 3900-7600 RPM shows the range it is designed to operate in. Match your propeller and cell count so the motor stays inside that band.

Current and power

A working current of 1.8-14A and a power rating of 19.9-207 indicate the load range the motor is built to handle. Choose an ESC and wiring that comfortably cover the current your propeller draws.

Cells and resistance

The 3-6S rating gives flexibility across 3-cell up to 6-cell packs. Internal resistance of 71 ohm and operating temperatures of 39-47°C describe the electrical and thermal behaviour to expect in normal use.

Shaft and stator

The 4 mm shaft and 31 mm stator define the mounting and propeller interface, so check your prop adapters and frame mounts match before assembly.

Compatibility and Requirements

Use 3-6S LiPo packs and an ESC rated for the current your setup draws. The 4 mm shaft and flexible mounting pattern accept a range of current propellers, but confirm your chosen prop and adapter fit. The motor is suited to quadcopter, tri-copter, hexacopter and similar multirotor layouts.

Typical Uses

Ideal for enterprise and industrial multirotor airframes, aerial platforms and custom builds where steady low-speed running and efficient power matter.

What's in the Box

  • 1 x T-Motor Navigator MN3110 700KV motor

Quick specs

Working Current (mA)
1.8-14A
Power Rating
19.9-207
Rated Speed (RPM)
3900-7600
Efficiency
14-06
Operating Temperature (°C)
39-47
Shaft Diameter
4 mm
See all specifications