Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The T-Motor P80Ⅲ Pin KV120 is a 649 g heavy-lift brushless motor rated to 3600W and 70A for agriculture and industrial drones. Its 36N42P layout, 15 mm shaft and sealed, corrosion-resistant housing suit demanding field use.

Key Highlights

  • 120 KV wind tuned for large-propeller heavy-lift multirotors
  • 36N42P configuration with 15 mm shaft diameter
  • 3600W max power and 70A peak current for 180 seconds
  • 14AWG silicone lead wire for high-current connections
  • 649 g including cable, 91.6 mm length, 43 mm width
  • Waterproof, dust-resistant, anti-corrosion and temperature resistant housing

Ideal For

  • Agricultural spray and spreader drone builders
  • Heavy-lift cargo multirotor designers
  • Industrial inspection UAV teams
  • Large-payload mapping aircraft builders
  • Professionals servicing T-Motor heavy-lift platforms

Buying Tip

Confirm your ESC current rating and propeller mount match the 70A peak and 15 mm shaft before ordering, since neither is included with the motor.

Elecvora expert review

Our verdict

The P80Ⅲ Pin KV120 is a purpose-built heavy-lift motor with sensible specs for agriculture and industrial work, including a sealed housing and high burst power. It rewards careful system matching rather than casual use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 3600W and 70A burst ratings for demanding lift tasks
  • Sealed, corrosion-resistant housing suited to field conditions
  • 15 mm shaft and 14AWG leads for robust connections
  • Low idle current draw

Cons

  • 649 g per motor adds significant weight
  • No propeller, ESC or mounting hardware included
  • Burst ratings are time-limited, so continuous use needs headroom

Best for

Agriculture and heavy-lift multirotor builders

Not ideal for

Small freestyle or lightweight FPV builds

Specifications

Motor KV (RPM/V)120 KV
Peak Current (A)70 (180s)
Configuration36N42P
Lead Wire14AWG Silicone wire
Shaft Diameter15 mm
Current Rating (A)<2.0A (at 10V)
Max. Power (W)3600W (180s)
Length (mm)91.6
Width (mm)43
Weight (g)649, (Incl. Cable)
Internal Resistance(mOhm)36-41mQ
Shipping Weight0.899 kg
Shipping Dimensions18 × 13 × 7 cm

What's in the box

  • 1 x T-Motor P80Ⅲ Pin KV120 motor

Frequently Asked Questions

What does the 120 KV rating mean?
It means the motor spins at 120 RPM per volt applied, which suits large propellers and higher-voltage heavy-lift setups rather than small fast craft.
Is the 3600W rating continuous?
No. The 3600W maximum power and 70A peak current are both specified for 180 seconds, so they describe burst performance.
What shaft size does it use?
The motor has a 15 mm shaft diameter, so you need a propeller mount that fits that size.
What wire comes with the motor?
It uses 14AWG silicone lead wire, which you will need to connect to your power system with suitable connectors or solder joints.
Is anything else included?
The package includes one T-Motor P80Ⅲ Pin KV120 motor. Propellers, ESCs and mounting hardware are not listed as included.
Can it handle wet or dusty conditions?
The housing is described as waterproof, dust-resistant, anti-corrosion and temperature resistant, which suits field environments, though you should still inspect it regularly.

Overview

The T-Motor P80Ⅲ Pin KV120 is a brushless outrunner aimed at agriculture and heavy-lift drone platforms. It uses a 120 KV wind, meaning it turns relatively slowly per volt and is intended to drive large propellers on multirotor frames. The 36N42P stator and magnet configuration, combined with a 15 mm shaft, gives builders a motor sized for substantial thrust demands rather than small craft.

Each unit weighs 649 g including its cable and measures 91.6 mm in length with a 43 mm width. The housing is described as waterproof, dust-resistant, anti-corrosion and temperature resistant, which matters for equipment that works around spray, soil dust and outdoor heat.

Key Features

  • 120 KV rating for large-propeller, high-thrust multirotor designs
  • 36N42P motor configuration
  • 3600W maximum power and 70A peak current over a 180-second window
  • 14AWG silicone lead wire for high-current wiring
  • 15 mm shaft diameter
  • Internal resistance of 36–41 mOhm
  • Sealed, corrosion-resistant and temperature-resistant construction

Specifications Explained

KV and configuration

At 120 KV, the motor produces 120 RPM per volt applied, so it is paired with larger propellers and higher-voltage packs rather than small, fast-spinning setups. The 36N42P layout is a high-pole-count design common in heavy-lift motors, contributing to smooth torque delivery.

Power and current

The 3600W maximum power and 70A peak current are both quoted for 180 seconds, so they describe short bursts rather than continuous duty. Plan your propulsion system with headroom and check that your ESCs and wiring can handle these currents. The current rating of under 2.0A at 10V reflects low no-load draw.

Physical details

At 649 g including cable, the motor adds meaningful mass that must be accounted for in the frame and payload budget. The 15 mm shaft and 14AWG silicone leads are sized for robust mechanical and electrical connections.

Compatibility and Requirements

Builders should match the motor with ESCs, batteries and propellers rated for the currents and voltages their design will see, since the motor alone does not define those limits. The 15 mm shaft requires a compatible propeller mount, and the 14AWG leads need suitable connectors or solder joints. No propeller, ESC or mounting hardware is included unless stated in the package contents.

Typical Uses

This motor suits agricultural spraying and spreading drones, heavy-lift cargo multirotors and industrial inspection platforms that carry substantial payloads. It is also relevant for large-scale mapping aircraft where endurance and stable thrust matter.

What's in the Box

One T-Motor P80Ⅲ Pin KV120 motor is supplied. Check the package contents before ordering if you need additional hardware.

Quick specs

Motor KV (RPM/V)
120 KV
Peak Current (A)
70 (180s)
Configuration
36N42P
Lead Wire
14AWG Silicone wire
Shaft Diameter
15 mm
Current Rating (A)
<2.0A (at 10V)
See all specifications