
1 / 6 · Click to enlarge
AI Summary
A refurbished two-piece set of T-Motor Antigravity 4006 380KV brushless motors, tested and working. The ultra-thin aluminium body and cooling-focused ventilation help the motor run stably on 4S to 6S LiPO setups.
Key Highlights
- Refurbished, tested pair of T-Motor Antigravity 4006 380KV motors
- Ultra-thin high-strength aluminium housing keeps the build light
- Single thick copper wire winding reduces energy dissipation
- Ventilation-focused cooling design supports stable, cooler running
- 40 mm shaft diameter with 4S to 6S LiPO compatibility
- Professionally inspected with minor cosmetic marks possible
Ideal For
- Multirotor builders assembling lightweight custom frames
- Makers upgrading to branded T-Motor components
- Pilots running 4S to 6S LiPO power systems
- Hobbyists who want tested refurbished motors at lower cost
- Builders replacing a damaged motor in an existing set
Buying Tip
Confirm your frame mount and prop adapter match the 40 mm shaft interface, and check your ESC current rating against your chosen propeller before flying.
Elecvora expert review
Our verdict
A sensible pick for builders who want genuine T-Motor Antigravity hardware without new-unit pricing. The refurbished pair is tested and working, with cosmetic marks only, so plan your build around the 4S to 6S requirement and the 40 mm shaft interface.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Genuine T-Motor Antigravity 4006 design
- Ultra-thin aluminium body keeps weight down
- Cooling-focused ventilation supports stable running
- Single thick copper winding limits energy loss
- Tested refurbished pair at a lower cost than new
Cons
- Cosmetic scratches near threads are possible
- Original packaging may show imperfections
- ESCs, props, frame and batteries are not included
Best for
Lightweight multirotor builds using 4S to 6S LiPO power
Not ideal for
Buyers who require factory-sealed new units with flawless packaging
Specifications
| Power Rating | 48-420 |
|---|---|
| Shaft Diameter | 40 mm |
| Compatible LiPO Batteries | 4S to 6S |
| Internal Resistance (Ohm) | 194 |
| Operating Temperature (°C) | 30-46 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
What's in the box
- 2 x T-Motor Antigravity 4006 380KV motors (refurbished)
Frequently Asked Questions
What does refurbished mean for this motor set?
Which batteries can I use?
What is included in the set?
What is the shaft diameter and why does it matter?
How hot should the motors get?
How should I care for these motors?
Overview
This listing is for a refurbished two-piece set of T-Motor Antigravity 4006 380KV brushless motors. Each motor has been opened for testing and professionally refurbished, then checked to confirm it is in good working condition. Buyers should expect minor signs of use, such as light scratch marks near the threads, and the original packaging box may show cosmetic imperfections. None of this affects how the motor performs.
The Antigravity 4006 is built around an ultra-thin housing machined from high-strength aluminium. T-Motor uses a single thick copper wire winding to reduce energy dissipation, and the motor includes a dedicated cooling layout that ventilates the winding. Together these choices support easier acceleration and more stable running under load.
Key Features
- Refurbished and tested by the Elecvora team before shipping
- Ultra-thin, high-strength aluminium construction for low weight
- Single thick copper wire winding to limit energy dissipation
- Unique ventilation and cooling design for the winding
- Careful assembly with strong rotor dynamic balance
- Supplied as a matched pair of two motors
Specifications Explained
Power and voltage
The 380KV rating describes how the motor responds to input voltage, and the unit is rated for 4S to 6S LiPO batteries. Match your pack and propeller choice to the airframe and electronic speed controllers you already run, and confirm the current draw stays within the limits of your ESC.
Shaft and dimensions
The 40 mm shaft diameter figure defines the mounting and prop interface, so check that your prop adapters and frame mounts match before ordering. Shipping weight is listed at 0.1 kg with shipping dimensions of 8 x 6 x 4 cm, making the pair easy to store and post.
Thermal behaviour
Internal resistance is given as 194 ohm and the stated operating temperature range is 30 to 46 degrees Celsius. The cooling design is intended to keep the winding ventilated so the motor stays inside that window during normal use.
Compatibility and Requirements
These motors are intended for use with 4S to 6S LiPO batteries. You will need suitable ESCs, a frame or mount that accepts the 40 mm shaft interface, and propellers matched to your build. No ESCs, props, frames or batteries are included.
Typical Uses
The lightweight, thin-profile design suits multirotor projects where saving grams matters, including custom builds and maker projects that use branded components. The cooling layout and stable running behaviour make the pair a reasonable fit for longer flight sessions where heat build-up is a concern.
What's in the Box
- 2 x T-Motor Antigravity 4006 380KV motors (refurbished)
Quick specs
- Power Rating
- 48-420
- Shaft Diameter
- 40 mm
- Compatible LiPO Batteries
- 4S to 6S
- Internal Resistance (Ohm)
- 194
- Operating Temperature (°C)
- 30-46
- Shipping Weight
- 0.1 kg



















