
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this refurbished development boards is a good fit for makers, students and electronics hobbyists. Main specs: logic input (v) 3.3; compatibility Pi Series; length (mm) 65. Check that your power source supplies 3.3/5 before connecting it.
Key Highlights
- Logic Input (V): 3.3
- Compatibility: Pi Series
- Length (mm): 65
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Logic Input (V) | 3.3 |
|---|---|
| Compatibility | Pi Series |
| Length (mm) | 65 |
| Weight (g) | 78 |
| Width (mm) | 56.5 |
| HAT Type | Pan Tilt HAT |
| Control Chip | PCA9685 |
| PWM Resolution | 12-bit |
| Operating Voltage (VDC) | 3.3/5 |
| Shipping Weight | 0.112 kg |
| Shipping Dimensions | 13.5 × 9.5 × 4 cm |
Overview
The Refurbished - Pan-Tilt HAT for Raspberry Pi and Jetson Nano, made by DFRobot, is listed in our refurbished development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Logic Input (V): 3.3
- Compatibility: Pi Series
- Length (mm): 65 (measure your mounting space before ordering)
- Weight (g): 78 (important for drones, RC models and anything you carry)
- Width (mm): 56.5 (measure your mounting space before ordering)
- HAT Type: Pan Tilt HAT
- Control Chip: PCA9685
- PWM Resolution: 12-bit
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a Refurbished - Pan-Tilt HAT for Raspberry Pi and Jetson Nano
Below is the link If you want a brand new https://Elecvora.in/product/pan-tilt-hat-for-raspberry-pi-and-jetson-nano/
Condition: This Pan-Tilt HAT for Raspberry Pi and Jetson Nano has been professionally refurbished by the Elecvora.in team. The product packaging was opened for testing purposes only; otherwise, the product is in proper working condition. Please note that the original packaging box may show minor cosmetic damage.
This is a 2-DOF pan-tilt hat based on Raspberry Pi 40PIN GPIO. It can directly be used once plugged into the Pi board’s GPIO. Meanwhile, the board makes the Raspberry Pi GPIO pins led out for your convenient use. With the I2C interface adopted, the module allows your Pi to control the camera movement and light intensity detection only using 2 signal lines. The onboard PCA9685 chip can output 12-bit resolution PWM to control the rotation of the pan-tilt. In addition, it comes with onboard TSL25911FN and built-in ADC that could make responses to light similar to human eyes, which is helpful for enhancing module performance; The onboard voltage level translators make it compatible with the 3.3V/5V operating level. There is a specific acrylic board for fixing the Raspberry Pi camera on this product.
Through actual tests, it is proven that this module is compatible with all series types of Raspberry Pi and works well with the Jetson Nano board. It can do the 2-DOF motion in the horizontal and vertical directions, which is suitable for image monitoring/recognition and tracking when installed a camera. Besides, when combining an IR sensor or Ultrasonic distance sensor, it can be turned into a detection device to make a robot sense and avoid the surrounding obstacles. Of course, you can use it with other various sensors to complete your interactive works by Raspberry Pi or Jetson Nano.
To assemble the Pan-Tilt hat you have to follow these steps: 
Package Includes:
1 x Pan-Tilt HAT for Raspberry Pi and Jetson Nano
Quick specs
- Logic Input (V)
- 3.3
- Compatibility
- Pi Series
- Length (mm)
- 65
- Weight (g)
- 78
- Width (mm)
- 56.5
- HAT Type
- Pan Tilt HAT



















