
1 / 4 · Click to enlarge
AI Summary
A compact analog MEMS microphone module from DFRobot that runs on 3.3V or 5V and outputs a sound waveform for any ADC-equipped microcontroller. Its onboard amplifier and -42dB sensitivity make voice and sound-level sensing easy to add to Arduino and similar projects.
Key Highlights
- Analog output directly readable by a microcontroller ADC
- Wide 3.3V to 5V supply for mixed logic projects
- -42dB sensitivity with 59dBA signal-to-noise ratio
- 100Hz–8KHz frequency response for voice and general audio
- Tiny 18 × 12.5 mm board fits compact enclosures
- Includes 3-pin 2.54mm header for quick wiring
Ideal For
- Arduino and microcontroller hobbyists adding sound sensing
- Students learning about analog audio sampling
- Makers building sound-activated switches or noise meters
- Product prototypers needing a compact MEMS microphone
- Educators demonstrating acoustic waveform capture
Buying Tip
Check that your microcontroller board has a free analog input and that you can solder the included 3-pin header, since the module ships without it attached.
Elecvora expert review
Our verdict
A well-made, compact MEMS microphone module that makes analog sound sensing simple on 3.3V and 5V systems. It is a sensible choice for prototyping and education where a clean analog output and small size matter more than studio-grade audio.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Works with both 3.3V and 5V supplies
- Small 18 × 12.5 mm footprint
- Analog output is easy to read with any ADC
- Good signal-to-noise ratio for the size
Cons
- Requires soldering the header before use
- Limited to 8KHz upper frequency response
- Analog output needs a free ADC channel
Best for
Makers and students adding sound sensing to microcontroller projects
Not ideal for
Applications needing full-band audio or digital microphone interfaces
Specifications
| Signal Type | Analog signal |
|---|---|
| Power Supply Voltage (V) | 3.3V/5V |
| Sensitivity (dB) | -42dB |
| S/N Ratio (dB) | 59dBA |
| Frequency Response | 100Hz~8KHz |
| Dimensions (L x W x H) mm | 18*12.5 mm/ 0.71*0.49” |
| Shipping Weight | 0.011 kg |
| Shipping Dimensions | 6 × 5.5 × 2.5 cm |
What's in the box
- 1 x Fermion: MEMS Microphone Module
- 1 x 2.54-3P Black Single Row Pin Header
Frequently Asked Questions
What is the output signal type of this module?
Can I use this module with both 3.3V and 5V boards?
What does the module output when there is no sound?
Is a header included and does it need soldering?
What frequency range does the microphone cover?
What is included in the box?
Overview
The DFRobot Fermion MEMS Microphone Module brings sound sensing to your microcontroller projects in a very small package. It uses a MEMS microphone element with an onboard amplifier and provides an analog voltage output that represents the acoustic waveform. In a quiet room the output sits at approximately 0.66 × VCC, and when sound arrives the voltage moves around that level, so a standard ADC sample gives you a usable audio signal.
The board measures just 18 × 12.5 mm and accepts a 3.3V or 5V supply, which makes it easy to pair with common development boards. Whether you are building a clap-activated switch, a noise-level meter or a simple voice recorder, this module gives you a clean analog front end without extra circuitry.
Key Features
- Analog signal output for direct connection to an ADC input.
- 3.3V/5V supply voltage to suit a range of logic levels.
- -42dB sensitivity for capturing everyday sounds.
- 59dBA signal-to-noise ratio for clearer audio sampling.
- 100Hz–8KHz frequency response covering voice and common environmental sounds.
- Compact 18 × 12.5 mm board that fits small enclosures and breadboards.
Specifications Explained
Sensitivity (-42dB) describes how much output voltage the module produces for a given sound pressure. A -42dB rating is well suited to close-range voice and general sound detection. Signal-to-noise ratio (59dBA) indicates the margin between the audio signal and the module's own noise floor; a higher value means cleaner samples. Frequency response (100Hz–8KHz) shows the range of tones the microphone reproduces, which covers speech and most ambient sounds while excluding very low bass and very high treble. The analog output means you read the waveform with your microcontroller's ADC rather than a digital audio interface.
Compatibility and Requirements
The module works with any 3.3V or 5V main controller that has an analog-to-digital converter input. It requires a power supply within the stated 3.3V–5V range and a free ADC channel. No special library is needed for basic sampling, although you will need to write or use code that reads the ADC and processes the waveform. The included 3-pin header must be soldered to the board before use.
Typical Uses
- Sound-activated projects such as clap switches
- Noise-level monitoring and data logging
- Voice recording and acoustic waveform capture
- Interactive installations and educational demonstrations
- Prototyping audio sensing in small devices
What's in the Box
- 1 × Fermion MEMS Microphone Module
- 1 × 2.54mm 3-pin black single-row pin header

Quick specs
- Signal Type
- Analog signal
- Power Supply Voltage (V)
- 3.3V/5V
- Sensitivity (dB)
- -42dB
- S/N Ratio (dB)
- 59dBA
- Frequency Response
- 100Hz~8KHz
- Dimensions (L x W x H) mm
- 18*12.5 mm/ 0.71*0.49”



















