
1 / 4 · Click to enlarge
AI Summary
A compact 3.3 V breakout built on the ScioSense ENS160 chip that reports TVOC, eCO2 and AQI over I2C or SPI. On-chip algorithms and automatic baseline correction deliver ready-to-use indoor air quality data after a short warm-up.
Key Highlights
- Reports TVOC, eCO2 and AQI from one sensor
- I2C and SPI interfaces with selectable addresses
- TrueVOC metal oxide technology for fast response
- On-chip algorithms output easy-to-read values
- Automatic baseline correction for long-term stability
- Compact 20 x 15 mm board running at 3.3 V
Ideal For
- Makers building indoor air quality monitors
- Home automation enthusiasts adding environmental sensing
- HVAC and ventilation project developers
- Students learning I2C and SPI sensor integration
- Product prototypers testing air quality feedback
Buying Tip
Confirm your host board can supply a stable 3.3 V rail and that its I2C bus is free at address 0x53 or 0x52 before wiring the sensor in.
Elecvora expert review
Our verdict
A tidy, well-integrated breakout that turns a capable metal oxide sensor into a plug-and-read module. It is a sensible choice for anyone who wants air quality numbers without writing compensation algorithms.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Three useful IAQ outputs from one board
- I2C and SPI with two selectable addresses
- On-chip algorithms and automatic baseline correction
- Small 20 x 15 mm footprint
- Wide operating temperature and humidity range
Cons
- Requires a regulated 3.3 V supply
- Needs about 3 minutes of warm-up before accurate data
- Headers and cables are not included
Best for
Indoor air quality monitoring projects on 3.3 V microcontrollers and single-board computers
Not ideal for
Outdoor or harsh-environment installations beyond the rated humidity and temperature limits
Specifications
| Operating Voltage (V) | 3.3 |
|---|---|
| Working Current (mA) | 29mA |
| Interface | I2C, SPI |
| I2C Address | 0x52, 0x53(Default) |
| Operating Temperature (°C) | -40℃~85℃ |
| Operating humidity | 5%RH~95%RH |
| Measurement Range | 0ppb~65000ppb (TVOC) |
| Size (mm) | 20 x 15mm/ 0.79 x 0.59” |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 6 × 2 cm |
What's in the box
- 1 x DFRobot Fermion ENS160 Air Quality Sensor (Breakout)
Frequently Asked Questions
What values does the ENS160 breakout output?
Which interfaces can I use?
What voltage does it need?
How long before readings are accurate?
Is anything else included in the package?
How do I keep readings stable over time?
Overview
The DFRobot Fermion ENS160 Air Quality Sensor is a small breakout board for indoor air quality monitoring. At its centre is the ScioSense ENS160 sensor chip, which combines metal oxide sensing with intelligent on-chip processing. Instead of raw resistance values, the board delivers understandable environmental readings: total volatile organic compounds (TVOC), equivalent CO2 (eCO2) and an air quality index (AQI).
Because the module is only 20 x 15 mm and runs from a 3.3 V supply, it fits neatly into compact enclosures, sensor nodes and breadboard prototypes. Both I2C and SPI are available, giving you flexibility in how you wire it into an existing microcontroller or single-board computer setup.
Key Features
- Multiple IAQ outputs: TVOC, eCO2 and AQI from a single sensor, plus supporting environmental data.
- TrueVOC technology: metal oxide sensing paired with on-chip algorithms for accurate, fast-responding results.
- Short warm-up: preheat for about 3 minutes to obtain accurate data more quickly.
- Automatic baseline correction: helps keep readings stable over long periods of use.
- Dual interface: I2C with selectable addresses 0x52 and 0x53, or SPI.
Specifications Explained
Operating voltage: 3.3 V is required, so check your board's logic and supply levels before connecting. Working current is around 29 mA, which is modest for a continuously running sensor node.
Measurement range: TVOC detection spans 0 ppb to 65000 ppb, covering the low concentrations typical of indoor spaces through to heavily polluted conditions.
Environmental limits: operation is rated from -40 °C to 85 °C and 5%RH to 95%RH, so the module can be used in a wide variety of indoor and sheltered installations.
I2C addressing: the default address is 0x53, with 0x52 also available, which lets two sensors share a bus when needed.
Compatibility and Requirements
The board communicates over I2C or SPI and needs a 3.3 V supply. DFRobot documents connection examples with the FireBeetle Board ESP32-E and with Raspberry Pi, so those are useful starting points. You will need a host microcontroller or computer, jumper wires or a breadboard, and suitable mounting for your enclosure. Refer to the DFRobot wiki page for the ENS160 breakout for wiring details.
Typical Uses
- Air purification and home automation devices
- Environmental pollution detection projects
- HVAC and ventilation systems
- Building automation and smart thermostats
- Electrical appliances such as range hoods
What's in the Box
One DFRobot Fermion ENS160 Air Quality Sensor (Breakout). Headers, cables and host boards are not included.



Quick specs
- Operating Voltage (V)
- 3.3
- Working Current (mA)
- 29mA
- Interface
- I2C, SPI
- I2C Address
- 0x52, 0x53(Default)
- Operating Temperature (°C)
- -40℃~85℃
- Operating humidity
- 5%RH~95%RH


















