
1 / 4 · Click to enlarge
AI Summary
A low-power three-axis accelerometer module with selectable ±2g to ±16g ranges, 16-bit output and built-in motion detection. Its Gravity I2C connector and address toggle switch make it quick to wire into Arduino or Raspberry Pi projects without soldering.
Key Highlights
- Selectable full scale of ±2g, ±4g, ±8g or ±16g
- 16-bit data output with rates from 1.6 Hz to 1600 Hz
- Two programmable interrupts for motion and tap events
- Gravity I2C connector, no soldering required
- I2C address switchable between 0x19 and 0x18
- Wide 3.3 V to 5 V operating voltage range
Ideal For
- Makers building Arduino or Raspberry Pi motion-sensing projects
- Students learning I2C sensors and accelerometer data
- Product developers prototyping low-power wearables
- Robotics builders needing tilt and orientation feedback
- Engineers adding tap or free-fall detection to a device
Buying Tip
Check that your host board has an I2C bus and a Gravity-compatible port or adapter before ordering, since the module relies on the Gravity-4P connector.
Elecvora expert review
Our verdict
A well-rounded accelerometer module that balances low power draw with a wide choice of ranges and built-in motion detection. The Gravity connector and address switch make it unusually quick to integrate for a sensor at this level.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Selectable ±2g to ±16g range suits many applications
- Very low current draw in low-power mode
- Gravity connector removes soldering for quick testing
- Built-in interrupts and motion detection reduce host workload
- Switchable I2C address helps with multi-sensor buses
Cons
- Requires a Gravity-compatible port or adapter
- High-performance mode draws noticeably more current
- Motion detection functions need configuration through the wiki samples
Best for
Makers and developers who want a low-power, easy-to-wire accelerometer with built-in motion detection.
Not ideal for
Projects that need a sensor pre-calibrated for precise navigation-grade measurements.
Specifications
| Operating Voltage (VDC) | 3.3 to 5 |
|---|---|
| Working Current (uA) | 8~10 |
| Frequency (Hz) | 1.6Hz~1600Hz |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 27 |
| Width (mm) | 27 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 5 × 3 cm |
What's in the box
- 1 x Gravity I2C LIS2DW12 Triple Axis Accelerometer Sensor
- 1 x Gravity-4P I2C/UART Sensor Connector
Frequently Asked Questions
What voltage does the module need?
How do I change the I2C address?
Do I need to solder anything?
What measurement ranges are available?
What is included in the package?
Can it detect taps and free-fall?
Overview
The DFRobot Gravity I2C LIS2DW12 is a three-axis linear accelerometer module designed for motion sensing in embedded and maker projects. It measures acceleration on three axes and delivers 16-bit output, with a user-selectable full scale of ±2g, ±4g, ±8g or ±16g. Output data rates are adjustable from 1.6 Hz to 1600 Hz, letting you trade update speed against power consumption.
The board is part of the Gravity series, so it connects through a Gravity-4P I2C/UART sensor connector. No soldering is needed, and a toggle switch changes the I2C address between the default 0x19 and the optional 0x18, which helps when two sensors share one bus.
Key Features
- Selectable measurement range: choose ±2g for fine tilt resolution or ±16g for stronger movement.
- 16-bit data output: finer step resolution across the selected range.
- Flexible data rate: 1.6 Hz to 1600 Hz for slow monitoring or faster sampling.
- Programmable interrupts: two independent interrupt lines for event-driven designs.
- Motion engine: supports free-fall, portrait/landscape, 6D/4D orientation, single/double tap, stationary/motion and wake-up detection.
- 32-level FIFO buffer: stores samples so the host can batch-read data.
- Low current draw: 8 to 10 µA in low-power, low-noise mode.
Specifications Explained
The 3.3 V to 5 V operating voltage means the module can be powered directly from common 3.3 V and 5 V microcontroller boards. Current consumption of 8 to 10 µA in low-power, low-noise mode suits battery-powered nodes, while high-performance mode draws more for faster or cleaner sampling. Noise is specified at 1.3 mgRMS in low-power mode.
The ±2g to ±16g range controls sensitivity: lower ranges resolve small tilt changes, higher ranges avoid clipping during sharper motion. The 1.6 Hz to 1600 Hz frequency range sets how often readings are produced. The module measures 27 x 27 mm with 3.1 mm inner and 6 mm outer mounting holes, and it is rated for -40 °C to 85 °C operation. It also offers 10000g shock survivability and is ECOPACK, RoHS and Green compliant.
Compatibility and Requirements
The module uses a Gravity-I2C interface and ships with a Gravity-4P I2C/UART sensor connector. It works with 3.3 V to 5 V logic supplies. You will need a host board with an I2C bus and a matching Gravity port or adapter. Sample programs for the motion detection functions are provided through the product wiki.
Typical Uses
- Tilt and orientation sensing in robotics
- Free-fall and tap detection for user interfaces
- Motion-activated wake-up in low-power devices
- Wearable and portable movement logging
- Vibration and impact monitoring within the rated range
What's in the Box
- 1 x Gravity I2C LIS2DW12 Triple Axis Accelerometer Sensor
- 1 x Gravity-4P I2C/UART Sensor Connector
Quick specs
- Operating Voltage (VDC)
- 3.3 to 5
- Working Current (uA)
- 8~10
- Frequency (Hz)
- 1.6Hz~1600Hz
- Operating Temperature (°C)
- -40 to 85
- Length (mm)
- 27
- Width (mm)
- 27


















