Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The T-Motor SlattFPV 2306.3 1700KV is a durable brushless FPV motor for 6S freestyle quads. Its Unibell design and 4mm shaft deliver stable, smooth power for demanding maneuvers.

Key Highlights

  • 1700KV rating optimized for 6S LiPo batteries
  • Durable Unibell design for crash resistance
  • 4mm shaft for stability during aggressive flying
  • Lightweight at approximately 34.1g including cables
  • 12N14P configuration for smooth throttle response
  • Co-branded with SlattFPV for freestyle performance

Ideal For

  • FPV freestyle pilots building 5-inch quads
  • Pilots flying bando or urban freestyle
  • Drone builders looking for 6S-compatible motors
  • Enthusiasts seeking durable motors for aggressive flying
  • Long-range pilots wanting efficient 2306 motors

Buying Tip

Confirm your ESC can handle at least 35A per motor and your frame uses a compatible mounting pattern before purchasing.

Elecvora expert review

Our verdict

The T-Motor SlattFPV 2306.3 1700KV is a well-built freestyle motor that offers smooth power and durability for 6S setups. Its Unibell design and 4mm shaft make it a reliable choice for pilots who push their quads hard.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Durable Unibell construction
  • Smooth throttle response
  • Lightweight at 34.1g
  • Strong 4mm shaft
  • Optimized for 6S LiPo

Cons

  • Requires soldering to ESC
  • Not compatible with 4S batteries
  • Prop nut not included

Best for

Freestyle pilots flying 5-inch 6S quads

Not ideal for

Beginners or pilots using 4S batteries

Specifications

Item TypeDrone motor
Motor TypeBrushless Drone Motor
Model No. / Name2306.3
Motor KV (RPM/V)1700 KV
Compatible LiPO Batteries6S
Shaft Diameter4 mm
Stator Size (mm)2306.3
Configuration12N14P
Lead Wire20# × 150mm
Idle Current0.93(10V)
Peak Current (A)34.7(10s)
DesignDurable Unibell
Motor diameter (mm)Φ28.6 × 30.3
Weight (g)34.1
ColorGrey
ManufacturerRCA Corporation
Display Resolution (pixel)1280x800
Shipping Weight0.054 kg
Shipping Dimensions6 × 4.5 × 3.5 cm

What's in the box

  • 1 x T-Motor SlattFPV 2306.3 FPV Motor Grey 1700KV
  • 1 x Fitting Accessory

Frequently Asked Questions

What battery is compatible with this motor?
This motor is designed for 6S LiPo batteries. Using other voltages may lead to poor performance or damage.
Does the motor come with a prop nut?
The package includes a fitting accessory, but a prop nut is not explicitly listed. You may need to use a standard M5 prop nut.
What is the peak current of this motor?
The peak current is 34.7A for up to 10 seconds. Ensure your ESC can handle this current.
What is included in the box?
You receive one T-Motor SlattFPV 2306.3 motor and one fitting accessory.
How do I maintain this motor?
Keep the motor clean and check for loose screws or damaged wires after crashes. Lubricate bearings occasionally if needed.
Can I use this motor on a 4S battery?
No, the 1700KV rating is optimized for 6S. Using 4S will result in lower performance and is not recommended.

Overview

The T-Motor SlattFPV 2306.3 1700KV is a brushless drone motor developed for freestyle FPV pilots. Built around a durable Unibell design and co-branded with SlattFPV, it aims to deliver smooth power delivery and control during demanding maneuvers. The 1700KV rating is intended for 6S LiPo setups, making it a suitable choice for 5-inch freestyle quads and bando flying. At approximately 34.1g including cables, it keeps weight in check while offering a robust 4mm shaft and a 12N14P configuration.

Key Features

  • Unibell construction: The one-piece bell design contributes to durability and a clean look, helping the motor withstand the rigors of freestyle flying.
  • 1700KV for 6S: The motor speed constant is matched to 6S LiPo batteries, providing a balance of torque and top-end speed for aggressive flying styles.
  • 4mm shaft: A sturdy shaft diameter supports stability and power transfer, especially during rapid throttle changes.
  • 12N14P configuration: This stator and magnet arrangement is common in performance FPV motors, offering smooth operation and efficiency.
  • 20# lead wires: 150mm lead wires give flexibility during installation, allowing you to route and solder as needed.
  • Lightweight build: At around 34.1g including cables, the motor helps keep overall quad weight low without sacrificing strength.

Specifications Explained

Motor KV (1700KV): This indicates the motor will spin 1700 RPM per volt applied. With a 6S LiPo (nominally 22.2V), it is designed for high performance in freestyle and racing-style flying. It is not intended for 4S or 3S setups, as the higher voltage would be excessive.

Stator size (2306.3): The 23mm stator diameter and 6.3mm height provide a good balance between torque and weight, common for 5-inch propellers. The 12N14P configuration (12 stator teeth, 14 magnets) is known for smooth power delivery.

Peak current (34.7A for 10s): This indicates the motor can handle brief bursts of high current, suitable for aggressive throttle punches. Ensure your ESC and battery can support this current draw.

Idle current (0.93A at 10V): This low idle current reflects efficiency at low throttle, contributing to longer flight times when cruising.

Weight (34.1g): Including cables, this weight is competitive for a 2306-size motor, helping maintain agility.

Shaft diameter (4mm): A 4mm shaft is standard for 5-inch FPV motors and provides strength for prop mounting.

Compatibility and Requirements

This motor is compatible with 6S LiPo batteries. It requires a suitable electronic speed controller (ESC) that can handle the peak current of 34.7A per motor, and a flight controller for signal input. The 20# lead wires are 150mm long and will need to be soldered to your ESC. The 4mm shaft accepts standard 5-inch FPV propellers (prop nut not included). Ensure your frame supports 2306-size motors with a 16x16mm or 19x19mm mounting pattern (check your frame specifications).

Typical Uses

This motor is ideal for freestyle FPV quads, particularly 5-inch builds where smooth throttle response and durability are important. It suits bando flying, acro maneuvers, and aggressive freestyle. It can also be used in long-range setups where efficiency is valued, though the 1700KV is primarily tuned for freestyle performance.

What's in the Box

  • 1 x T-Motor SlattFPV 2306.3 FPV Motor Grey 1700KV
  • 1 x Fitting Accessory

Quick specs

Item Type
Drone motor
Motor Type
Brushless Drone Motor
Model No. / Name
2306.3
Motor KV (RPM/V)
1700 KV
Compatible LiPO Batteries
6S
Shaft Diameter
4 mm
See all specifications