Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This relay module is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The T2401-O T2401-N DC 12V Dual LED Display Time Relay Module Digital Time Delay Relay Cycle Timer Switch Control Module Active/Passive Output is listed in our relay module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.



T2401-O (Active output)

Product selling point:
 
1: Parameter setting is simpler
2: Small and exquisite appearance
3: Direct output type
4: Wide application
5: Timing range: 0~999 (seconds, minutes, hours) Minimum unit: 1 second

Parameter:

Product Model: T2401-O
Product weight: 30g
Product size: 48X29X34mm
Mounting opening: 45.5x26.1mm
Timing range: 0~999 (seconds, minutes, hours) Minimum unit: 1 second
Technical parameters: DC12V 2OA MAX 240W MAX
Working humidity: 35%~85%
Working temperature: -10~60℃
Size unchanged, compatible with installation, convenient for direct output wiring, green start and red stop, easy to set up, appearance patent

Code menu introduction:
 
Press and hold the S button for 6 seconds to enter the code menu
Mode setting demo
Double-click the S key to enter the parameter setting mode
 
Safety warning:
 
 
The output is active, connect the load and then power on to avoid short circuit
 
 
Package List:
 
1 x Digital display delay relay module


T2401-N (No output)


Description:


1: Wide range of applications

2: Exquisite appearance

3: Small size

4: Simple to use

5: Passive output


Parameter:


Contacts de-energized No output

Can be connected to loads other than 12V

Dimensions: 47.6x28.6x33.2mm

Embedded installation

Mounting opening: 45x26.1mm

Green on and red off and the timing display starts. The stop timer unit is easy to set independently and easy to use

1-way normally open relay control on-off

There is a setting lock to prevent accidental touch

The timing range is adjustable from 0 to 999 (seconds, minutes, hours)

Minimum timing unit: 1 second

Timing error: ±4.5%

Integrated crystal oscillator

Power-on auto-run power-off save settings

Working voltage: DC12V

Load power DC12V 20A240W AC220V 1500W ( max )

Loop switch supported

Alternate 1 switch is not supported


Package included:


1 x DC12V delay dual display digital time relay module







Product Safety Information