Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
TB - 00014 UNO R3 Development Board Kit for Arduino  -  Colormix — image 1
Hover to zoom

1 / 7 · Click to enlarge

TB - 00014 UNO R3 Development Board Kit for Arduino - Colormix

AI Summary
Motherboard & Development Board for everyday users

The TB - 00014 UNO R3 Development Board Kit for Arduino - Colormix is a mid-range motherboard & development board designed for everyday users. It features Types: UNO R3 Development Board Kit for Arduino and Size: 17.5*9.2*2.5cm.

₹2,664
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,664
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Types: UNO R3 Development Board Kit for Arduino
Size: 17.5*9.2*2.5cm
Weight: 171g
One Package Weight: 0.21kgs / 0.47lb
One Package Size: 19cm * 11cm * 4cm / 7.48inch * 4.33inch * 1.57inch
Best Sellers Rank (Consumer Electronics): #789

Ideal For

Everyday convenience
Share:
SKU: S-DIY3242Category: Motherboard & Development Board

About This Product

The TB - 00014 UNO R3 Development Board Kit for Arduino - Colormix is a mid-range motherboard & development board designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Types: UNO R3 Development Board Kit for Arduino
  • Size: 17.5*9.2*2.5cm
  • Weight: 171g
  • One Package Weight: 0.21kgs / 0.47lb
  • One Package Size: 19cm * 11cm * 4cm / 7.48inch * 4.33inch * 1.57inch
  • Best Sellers Rank (Consumer Electronics): #789
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #12
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > Components Kits): #3

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Main Features: 1. Based on UNO R3 development board 2. Economic and portable 3. A product for Arduino that works with official Arduino boards Specification: 1.Chipset: ATMEGA328 2.Input Voltage: 9V 5V USB powered 3.External Power Source: 7 - 12V, 9V recommended 4.Digital Input / Output Pins: 14 ( 6 pins support PWM ) Analog pin input 5.Built-in Flash Memory: 32KB 6.SRAM: 2KB 7.EEPROM: 1KB 8.Clock Frequency: 16MHz Packing List: 1 x UNO R3 main board 1 x Cable 1 x 400-hole bread board 5 x Red LEDs 5 x Yellow LEDs 5 x Green LEDs 5 x Blue LEDs 2 x RGB 3-color LEDs 10 x 1kohm resistors 10 x 10kohm resistors 10 x 100kohm resistors 10 x 220R resistors 65 x Breadboard jump wires(5-23cm)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.