
1 / 6 · Click to enlarge
AI Summary
A compact multifunction tester that automatically identifies transistors, MOSFETs, diodes, resistors and capacitors on a 3-inch full-color display. One-button operation and a built-in lithium battery make quick component checks simple at the bench or on the go.
Key Highlights
- 3-inch full-color LCD shows component type and measured values
- Automatically detects NPN/PNP transistors, MOSFETs, diodes, thyristors and BJTs
- Tests resistors and capacitors with a single-button start
- Built-in lithium battery with green indicator when fully charged
- IR test hole reads remote control user codes and waveforms
- Automatic shutdown and manual shut-down for battery savings
Ideal For
- Electronics repair technicians checking components quickly
- Makers and hobbyists sorting loose transistors and MOSFETs
- Students learning component identification and values
- FPV and RC builders verifying parts before assembly
- Anyone testing infrared remote controls and their codes
Buying Tip
Confirm your charging source stays at the specified 4.5V input before connecting the tester, since overvoltage can permanently damage it.
Elecvora expert review
Our verdict
The TC-T7-H packs automatic component identification, a readable color display and IR remote testing into a small, battery-powered unit. It is a practical bench companion for quick checks rather than a precision laboratory meter.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Automatic detection covers transistors, MOSFETs, diodes, thyristors, resistors and capacitors
- Clear 3-inch full-color display
- Built-in lithium battery with charge indicator
- IR test hole adds remote control code and waveform reading
- Automatic and manual shutdown help conserve power
Cons
- Charging input must stay at 4.5V; overvoltage can damage the unit
- Not a precision laboratory instrument for tight-tolerance measurements
- Component connection depends on the Zip socket and test leads
Best for
Quick component identification and basic value checks at the bench or in the field
Not ideal for
Precision calibration or laboratory-grade measurement work
Specifications
| Item Type | Tester |
|---|---|
| Model No. / Name | Multifunction Tester |
| Display | 3″ Colourful display |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 9 × 6 × 5 cm |
What's in the box
- 1 x TC-T7-H Full-Color Multifunction Tester Unit
- 1 x USB cable
- 3 x Test Leads
Frequently Asked Questions
What component types can the TC-T7-H test?
How do I test a component?
What charging voltage does it need?
How do I know when the battery is charged?
Can it test infrared remote controls?
What is included with the tester?
Overview
The TC-T7-H is a multifunction component tester designed for fast, readable checks of common electronic parts. Instead of working through several separate instruments, you place a component in the Zip socket, lock the latch and press start. The tester then identifies the part and presents the result on its 3-inch full-color LCD.
It handles NPN and PNP transistors, n-channel and p-channel MOSFETs, diodes including double diodes, thyristors, BJTs, resistors and capacitors. A built-in lithium battery keeps the unit portable, and the charge indicator turns green when charging is complete.
Key Features
- Full-color 3-inch display: component type and values are shown clearly on screen.
- Automatic detection: the tester identifies supported components without manual mode selection.
- One-button operation: insert the part, press start and read the result.
- IR testing: place a remote control at the IR test hole and press a key to view the user code, data code and corresponding infrared waveform after decoding.
- Power management: automatic shutdown and manual shut-down help preserve the built-in battery.
- Self-calibration: the tester includes a self-calibration function to keep readings consistent.
Specifications Explained
The 3-inch colorful display is the main interface: it shows the detected component type together with the appropriate value, so you do not need to interpret a bare numeric readout. Automatic detection means the tester decides which supported component category it is looking at, which speeds up sorting loose parts. The built-in lithium battery removes the need for an external bench supply during use; the charging input voltage is 4.5V, and exceeding that can damage the tester. The IR test hole adds a second job: checking infrared remote controls and viewing their decoded codes and waveform.
Compatibility and Requirements
The tester supports the component types listed above and is operated through the Zip socket with its locking latch. Charging requires a 4.5V input; do not use a higher voltage. A USB cable and three test leads are supplied for connection and charging.
Typical Uses
- Identifying unknown transistors and MOSFETs pulled from a parts bin.
- Checking diodes, including double diodes, before soldering them into a circuit.
- Measuring resistors and capacitors during repair or prototyping.
- Testing infrared remote controls and inspecting their codes and waveforms.
- Teaching basic component identification in a classroom or workshop.
What's in the Box
- 1 x TC-T7-H full-color multifunction tester unit
- 1 x USB cable
- 3 x test leads

Quick specs
- Item Type
- Tester
- Model No. / Name
- Multifunction Tester
- Display
- 3″ Colourful display
- Shipping Weight
- 0.12 kg
- Shipping Dimensions
- 9 × 6 × 5 cm













