- Compact, small-size design
- Low noise for precise measurements
- Robust construction with high over-range capability
- High reliability and long-term stability
- Low deflection under load
- Virtually unlimited cycle life expectancy
- Minimal off-center loading errors
- Fast response time
- Available in 10 to 100 lbf force ranges
- Reverse polarity protection

1 / 2 · Click to enlarge
At a glance
Made by TE CONNECTIVITY, this load sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Load Sensor; model no. / name FC2231 0000 0010 L; output voltage 0.5 to 4.5. Check that your power source supplies 0.5 to 4.5 before connecting it.
Key Highlights
- Item Type: Load Sensor
- Model No. / Name: FC2231 0000 0010 L
- Output Voltage: 0.5 to 4.5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Load Sensor |
|---|---|
| Model No. / Name | FC2231 0000 0010 L |
| Force Range | 10 lbf |
| Output Voltage | 0.5 to 4.5 |
| Operating Temperature (°C) | -40+85 |
| Length (mm) | 40 |
| Width (mm) | 25 |
| Weight (g) | 18 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 10 × 8 × 3 cm |
Overview
The TE Connectivity FC2231-0000-0010-L Force Load Cell Sensor, FC22 Series, 10 lbf, 0.5 to 4.5 V, 2 ft Cable, made by TE CONNECTIVITY, is listed in our load sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Load Sensor
- Model No. / Name: FC2231 0000 0010 L
- Force Range: 10 lbf (quoted range is usually line-of-sight; walls and interference shorten it)
- Output Voltage: 0.5 to 4.5 (match this to your power supply; too high a voltage can damage the part)
- Operating Temperature (°C): -40+85
- Length (mm): 40 (measure your mounting space before ordering)
- Width (mm): 25 (measure your mounting space before ordering)
- Weight (g): 18 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This design eliminates the use of age-sensitive epoxies, ensuring long-term stability in both span and zero. Unlike conventional designs that rely on pressure capsules within gel-filled cavities, the FC22 directly measures force, avoiding issues like lead-die fatigue failure. Its low-strain operation provides superior resolution, high overload tolerance, and virtually unlimited cycle life.
Optimized for cost-efficiency, the FC22 is ideal for high-volume OEM applications, with the option for custom designs from TE’s Load Cell Engineering Center. For lower or higher force ranges, the FS20 and FC23 models are recommended, respectively.
Note: Refer to Datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
Quick specs
- Item Type
- Load Sensor
- Model No. / Name
- FC2231 0000 0010 L
- Force Range
- 10 lbf
- Output Voltage
- 0.5 to 4.5
- Operating Temperature (°C)
- -40+85
- Length (mm)
- 40








![CRG0402ZR, NEOHM - TE CONNECTIVITY, Zero Ohm Resistor, Jumper, 0402 [1005 Metric], 63 mW, 1 A, CRG — TE CONNECTIVITY](/_next/image?url=%2Fapi%2Fimg%3Furl%3Dhttps%253A%252F%252Frobu-prod-media.s3.ap-south-1.amazonaws.com%252Fuploads%252F2023%252F11%252FScreenshot-2023-11-07-160138.jpg&w=3840&q=75)










