Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by TE CONNECTIVITY, this load sensor is a good fit for makers, students and electronics hobbyists. Main specs: accuracy ± 1°C; operating temperature (°c) –40  to +85; cable length 2ft. Check that your power source supplies 2 to 10 before connecting it.

Key Highlights

  • Accuracy: ± 1°C
  • Operating Temperature (°C): –40  to +85
  • Cable Length: 2ft

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Signal Output20 mV/V
Supply Voltage2 to 10 
Accuracy± 1°C
Operating Temperature (°C)–40  to +85
Cable Length2ft
Length (mm)32
Width (mm)32
Weight (g)46
Shipping Weight0.048 kg
Shipping Dimensions7 × 6 × 3 cm

Overview

The TE Connectivity FC2311‑0000‑0500‑L FC23 Series Compression Load Cell , 500 lbf, 20 mV/V Output, 5 V Supply, Cable Mount, made by TE CONNECTIVITY, is listed in our load sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Signal Output: 20 mV/V
  • Supply Voltage: 2 to 10  (match this to your power supply; too high a voltage can damage the part)
  • Accuracy: ± 1°C
  • Operating Temperature (°C): –40  to +85
  • Cable Length: 2ft (measure your mounting space before ordering)
  • Length (mm): 32 (measure your mounting space before ordering)
  • Width (mm): 32 (measure your mounting space before ordering)
  • Weight (g): 46 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TE Connectivity FC2311‑0000‑0500‑L is a rugged OEM compression load cell delivering a full‑scale capacity of 500 lbf (~227 kg). Offering a 20 mV/V output and ±1% accuracy, it features Microfused™ silicon strain gauges fused to stainless steel for exceptional long‑term stability and minimal drift. The sensor is temperature‑compensated for zero and span, interchangeable with normalized calibration, and withstands harsh environments from –40 °C to +85 °C. With low noise, fast response, low deflection, and very high over‑range tolerance, it’s ideal for batch weighing, robotics, force control, hoist loads, and assembly‑line force monitoring. Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. 500 lbf (227 kgf) full‑scale compression capacity
  2. 20 mV/V output signal with 5 VDC excitation (2–10 V range)
  3. ±1% non‑linearity, hysteresis, and repeatability accuracy
  4. Thermally compensated zero and span with ≤±0.05 %FS/°C shift
  5. Microfused™ silicon strain‑gauge technology on stainless steel substrate
  6. Virtually unlimited cycle life with high over-range tolerance
  7. Compact load‑button design with low deflection and off‑center error
  8. Wide operating temperature range: –40 °C to +85 °C; isolation ≥50 MΩ at 250 VDC

Package Includes:

1 x TE Connectivity FC2311-0000-0500-L Load Cell

Quick specs

Signal Output
20 mV/V
Supply Voltage
2 to 10 
Accuracy
± 1°C
Operating Temperature (°C)
–40  to +85
Cable Length
2ft
Length (mm)
32
See all specifications