Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This flow sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Flow Sensor; compatibility Flow Channel Diameter 55 mm to 70 mm; operating temperature (°c) -40°C to 125°C.

Key Highlights

  • Model No. / Name: Flow Sensor
  • Compatibility: Flow Channel Diameter 55 mm to 70 mm
  • Operating Temperature (°C): -40°C to 125°C

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameFlow Sensor
CompatibilityFlow Channel Diameter 55 mm to 70 mm
Operating Temperature (°C)-40°C to 125°C
Shipping Weight0.005 kg
Shipping Dimensions4 × 2 × 1 cm

Overview

The TE Connectivity G-MAFCO-005 Mass Air Flow Sensor is listed in our flow sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Flow Sensor
  • Compatibility: Flow Channel Diameter 55 mm to 70 mm
  • Operating Temperature (°C): -40°C to 125°C
  • Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 4 × 2 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

G-MAFCO-005 55-70MM Mass Air Flow Sensor is a thermodynamic sensing element for the bidirectional measurement of mass airflow in a well-defined channel. It is dedicated for applications with high-reliability requirements such as medical or industrial gas flow applications. Mounted directly within the flowing media the LMMH03 is sensitive against the heat transfer on a micrometer scale. This heat transfer is detected by a micro-machined silicon device which is mounted on a ceramic substrate defining the geometry of the sensing element. The functional principle of the LMM-H03 is a hot film anemometer, which is the thin film version of the hot wire anemometer. A thin film heating element (heater) is heated to a defined temperature difference with respect to the air. At zero flow there is heat dissipation due to the thermal conductivity of the air. With applied flow, the heat dissipation increases steadily with the flow rate. The sensing element can be operated at Constant Power and Constant Voltage mode. However, it is recommended to operate LMM-H03 in the described Constant Temperature Difference (CTD) mode. In the CTD mode, the electronics detect any change of the thermal equilibrium very quickly and compensate for it by adjusting the power settings through the heaters. This allows a very reliable mass flow measurement with a very short time constant which is in the order of milliseconds.

Features:

  1. Highly reliable and long-term stable
  2. Fast reaction time
  3. Can be adapted to various flow channel geometries
  4. Can be used for almost all kinds of gases and volatile substances

Applications:
  1. Engine Control
  2. Industrial gas flow measurement
  3. Leak detection in pressurized air systems
  4. Spirometer

Package Includes:

1 x G-MAFCO-005 55-70MM Mass Air Flow Sensor

Quick specs

Model No. / Name
Flow Sensor
Compatibility
Flow Channel Diameter 55 mm to 70 mm
Operating Temperature (°C)
-40°C to 125°C
Shipping Weight
0.005 kg
Shipping Dimensions
4 × 2 × 1 cm
See all specifications