Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by TE CONNECTIVITY, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Absolute; sensor type MEMS digital barometric pressure sensor; output type I2C/SPI. Check that your power source supplies 1.8 V-3.6 V before connecting it.

Key Highlights

  • Pressure Type: Absolute
  • Sensor Type: MEMS digital barometric pressure sensor
  • Output Type: I2C/SPI

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Pressure TypeAbsolute
Pressure Range300 mbar to 1200 mbar
Sensor TypeMEMS digital barometric pressure sensor
Output TypeI2C/SPI
Supply Voltage1.8 V-3.6 V
Accuracy+/-1.5 mbar
ApplicationAltimeters and weather stations and industrial barometric sensing
Interface1 I2C
Width (mm)2
Length0.2 cm
Weight (Kg)0.002 kg
Shipping Weight0.03 kg
Shipping Dimensions2 × 2 × 2 cm

Overview

The TE Connectivity MS563702BA03-50, Barometric Pressure Sensor, 1.8 V~3.6 V, QFN, Range: 300 mbar~1200 mbar, made by TE CONNECTIVITY, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Pressure Type: Absolute
  • Pressure Range: 300 mbar to 1200 mbar (quoted range is usually line-of-sight; walls and interference shorten it)
  • Sensor Type: MEMS digital barometric pressure sensor (space for firmware, files or media)
  • Output Type: I2C/SPI
  • Supply Voltage: 1.8 V-3.6 V (match this to your power supply; too high a voltage can damage the part)
  • Accuracy: +/-1.5 mbar
  • Application: Altimeters and weather stations and industrial barometric sensing (space for firmware, files or media)
  • Interface: 1 I2C (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MS5607-02BA  Barometric Pressure Sensor is a high-resolution barometric pressure sensor from MEAS Switzerland, engineered for altimeter and variometer applications. Featuring an ultra-low power 24-bit ΔΣ ADC and factory-calibrated coefficients, it delivers precise pressure and temperature readings. With SPI and I2C communication options, this sensor is ideal for microcontroller interfacing without complex programming. Barometric Pressure Sensor is a  compact design (5.0 x 3.0 x 1.0 mm) fits perfectly in portable devices. Designed with advanced MEMS technology, the sensor offers high stability, low hysteresis, and an impressive altitude resolution of 20 cm. Ideal for drones, GPS devices, weather stations, and portable instrumentation. Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. High resolution 24-bit pressure and temperature output
  2. Altitude resolution up to 20 cm
  3. SPI and I2C digital interfaces
  4. Factory calibrated coefficients for accuracy
  5. Low power consumption suitable for battery operation
  6. Simple command-based interface, no register programming needed
  7. Compact and lightweight (5.0 x 3.0 x 1.0 mm)
  8. Highly stable MEMS technology with low hysteresis

Package Includes:

1 x TE Connectivity MS563702BA03-50 Pressure Sensor

Quick specs

Pressure Type
Absolute
Pressure Range
300 mbar to 1200 mbar
Sensor Type
MEMS digital barometric pressure sensor
Output Type
I2C/SPI
Supply Voltage
1.8 V-3.6 V
Accuracy
+/-1.5 mbar
See all specifications