Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by TE CONNECTIVITY, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Absolute; sensor type MEMS digital pressure sensor; output type I2C. Check that your power source supplies 1.5 V-3.6 V before connecting it.

Key Highlights

  • Pressure Type: Absolute
  • Sensor Type: MEMS digital pressure sensor
  • Output Type: I2C

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Pressure TypeAbsolute
Pressure Range300 mbar to 1.2 bar
Sensor TypeMEMS digital pressure sensor
Output TypeI2C
Supply Voltage1.5 V-3.6 V
Accuracy+/-1.5 mbar
ApplicationWearables and dive computers and weather stations and industrial
Resolution24 bits
Width0.33 cm
Weight (Kg)0.0033 kg
Shipping Weight0.025 kg
Shipping Dimensions5 × 5 × 3 cm

Overview

The TE Connectivity MS5840-02BA01 Pressure Sensor, Absolute, 300 mbar, 1.2 bar, 1.5 V, 3.6 V, Module, made by TE CONNECTIVITY, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Pressure Type: Absolute
  • Pressure Range: 300 mbar to 1.2 bar (quoted range is usually line-of-sight; walls and interference shorten it)
  • Sensor Type: MEMS digital pressure sensor
  • Output Type: I2C
  • Supply Voltage: 1.5 V-3.6 V (match this to your power supply; too high a voltage can damage the part)
  • Accuracy: +/-1.5 mbar
  • Application: Wearables and dive computers and weather stations and industrial
  • Resolution: 24 bits

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TE Connectivity MS5840-02BA is an ultra-compact, gel-filled MEMS pressure sensor, ideal for altimeter and barometer applications. Packaged in a rugged 3.3 × 3.3 × 1.7 mm ceramic-metal housing, it delivers 24-bit digital pressure and temperature readings via I²C. With 13 cm resolution at sea level, selectable fast conversion (0.5–17 ms), and microamp-level power draw, it's perfect for battery-driven wearables and mobile devices. The device operates between 300–1200 mbar and –20 to +85 °C and is factory calibrated for precision. A stainless-steel, anti-magnetic lid and gel potting provide IP-level protection, enabling deployment in outdoor and watertight applications. Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product

Features:

  1. Mini ceramic-metal package (3.3 × 3.3 × 1.7 mm)
  2. High altitude resolution (13 cm at sea level)
  3. 24-bit ΔΣ ADC with built-in calibration
  4. Fast conversion modes (0.5–17 ms selectable)
  5. Ultra-low power draw (0.6 µA idle, ≤0.1 µA standby)
  6. I²C digital interface, no external components needed
  7. Operating range: 300–1200 mbar, –20 to +85 °C
  8. Gel-filled, watertight and anti-magnetic stainless steel cap

Package Includes:

1 x TE Connectivity MS5840-02BA01 Pressure Sensor

Quick specs

Pressure Type
Absolute
Pressure Range
300 mbar to 1.2 bar
Sensor Type
MEMS digital pressure sensor
Output Type
I2C
Supply Voltage
1.5 V-3.6 V
Accuracy
+/-1.5 mbar
See all specifications