Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by TE CONNECTIVITY, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Absolute; sensor type MEMS digital barometric pressure sensor; output type I2C/SPI. Check that your power source supplies 1.8 V-3.6 V before connecting it.

Key Highlights

  • Pressure Type: Absolute
  • Sensor Type: MEMS digital barometric pressure sensor
  • Output Type: I2C/SPI

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Pressure TypeAbsolute
Pressure Range10 mbar to 1200 mbar
Sensor TypeMEMS digital barometric pressure sensor
Output TypeI2C/SPI
Supply Voltage1.8 V-3.6 V
Accuracy+/-1.5 mbar
ApplicationAltimeters and GPS aiding and weather stations and drones
No. of Pins8
Weight (Kg)0.008 kg
Shipping Weight0.01 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The TE CONNECTIVITY Pressure Sensor-MS561101BA03-50, Barometric, 10 mbar, 1200 mbar, 1.8 V, 3.6 V, made by TE CONNECTIVITY, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Pressure Type: Absolute
  • Pressure Range: 10 mbar to 1200 mbar (quoted range is usually line-of-sight; walls and interference shorten it)
  • Sensor Type: MEMS digital barometric pressure sensor (space for firmware, files or media)
  • Output Type: I2C/SPI
  • Supply Voltage: 1.8 V-3.6 V (match this to your power supply; too high a voltage can damage the part)
  • Accuracy: +/-1.5 mbar
  • Application: Altimeters and GPS aiding and weather stations and drones
  • No. of Pins: 8

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

MS561101BA03-50 is a barometric pressure sensor with thin metal cap. The MS5611-01BA is a new generation of high resolution altimeter sensor from MEAS Switzerland with SPI and I2C bus interface. This barometric pressure sensor is optimized for altimeter and variometers with an altitude resolution of 10cm. The sensor module includes a high linearity pressure sensor and an ultra-low power 24bit ΔΣ ADC with internal factory calibrated coefficients. It provides a precise digital 24bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of an altimeter/thermometer function without any additional sensor. The MS5611-01BA can be interfaced to virtually any microcontroller. The communication protocol is simple, without the need of programming internal registers in the device.

Features:

  1. Pressure range of 1bar
  2. High resolution module, 10cm
  3. Fast conversion down to 1ms
  4. Low power of 1µA (standby 0.15µA)
  5. QFN package 5.0 x 3.0 x 1.0mm3
  6. Supply voltage range from 1.8 to 3.6V
  7. Operating range from 10 to 1200 mbar, -40 to +85°C
  8. I2C and SPI interface up to 20MHz
  9. No external components (internal oscillator)
  10. Excellent long-term stability

Package Includes:

1 x TE CONNECTIVITY Pressure Sensor-MS561101BA03-50, Barometric, 10 mbar, 1200 mbar, 1.8 V, 3.6 V

Quick specs

Pressure Type
Absolute
Pressure Range
10 mbar to 1200 mbar
Sensor Type
MEMS digital barometric pressure sensor
Output Type
I2C/SPI
Supply Voltage
1.8 V-3.6 V
Accuracy
+/-1.5 mbar
See all specifications