
1 / 3 · Click to enlarge
At a glance
Made by TE CONNECTIVITY, this vibration sensors is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.005 kg.
Key Highlights
- Shipping Weight: 0.005 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.005 kg |
|---|---|
| Shipping Dimensions | 5 × 5 × 2 cm |
Overview
The TE Connectivity SDT1‑028K Shielded Piezo Film Sensor, 15~20 mV/μ Strain, 1 MΩ~10 MΩ, Vibration & Strain Detection, made by TE CONNECTIVITY, is listed in our vibration sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 5 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SDT1-028K Piezo Film Sensor is a lightweight and highly sensitive vibration and strain detection sensor designed for dynamic measurement applications. Built using piezoelectric film technology, this sensor delivers high output voltage while maintaining excellent frequency response over a wide range.
Its ultra-thin and flexible sensing element allows easy mounting on vibrating surfaces using double-sided adhesive, epoxy, or cyanoacrylate glue. The self-shielded construction minimizes EMI interference, making it ideal for condition monitoring, vibration analysis, impact sensing, structural testing, contact microphones, and dynamic strain measurement systems.
With direct compatibility to oscilloscopes and signal analyzers, the SDT1-028K provides reliable performance without requiring complex signal conditioning in most applications.
Features:
- Shielded piezo film design for EMI-resistant operation
- High strain sensitivity for precise dynamic measurements
- Ultra-lightweight, non-intrusive sensing element
- Wide frequency response (from low Hz to MHz range)
- Flexible mounting using adhesive, epoxy, or CA glue
- Integrated 18” coaxial cable for easy signal connection
Specifications:
- Sensor Type : Piezo Film Sensor
- Output Voltage : Minimum 15 V @ 10 MΩ
- Output Sensitivity : 15–20 mV/µ Strain
- Preferred Impedance : 10 MΩ
- Minimum Impedance : 1 MΩ
- Operating Force Range : Up to 2% Strain
- Frequency Response : Flat Response up to 10 MHz+
- Operating Temperature : 0°C to +70°C
- Storage Temperature : -40°C to +70°C
- Cable Type : Coaxial Cable
- Wire Length : 457.2 mm (18 Inches)
- Total Sensor Dimensions : 44.5 × 19.7 × 3.2 mm
- Sensor Element Dimensions : 28.6 × 11.2 × 0.13 mm
Package Includes:
1 x TE Connectivity SDT1‑028K Shielded Piezo Film Sensor, 15~20 mV/μ Strain, 1 MΩ~10 MΩ, Vibration & Strain Detection








![CRG0402ZR, NEOHM - TE CONNECTIVITY, Zero Ohm Resistor, Jumper, 0402 [1005 Metric], 63 mW, 1 A, CRG — TE CONNECTIVITY](/_next/image?url=%2Fapi%2Fimg%3Furl%3Dhttps%253A%252F%252Frobu-prod-media.s3.ap-south-1.amazonaws.com%252Fuploads%252F2023%252F11%252FScreenshot-2023-11-07-160138.jpg&w=3840&q=75)










