
1 / 2 · Click to enlarge
At a glance
Made by TE CONNECTIVITY, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Gauge; sensor type Silicon micromachined (SMI) low-pressure sensor; output type Analog Voltage. Check that your power source supplies 3 V-5.5 V before connecting it.
Key Highlights
- Pressure Type: Gauge
- Sensor Type: Silicon micromachined (SMI) low-pressure sensor
- Output Type: Analog Voltage
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Pressure Type | Gauge |
|---|---|
| Pressure Range | 0 to 300 Pa |
| Sensor Type | Silicon micromachined (SMI) low-pressure sensor |
| Output Type | Analog Voltage |
| Supply Voltage | 3 V-5.5 V |
| Accuracy | +/-1% F.S. |
| Application | HVAC and medical respiratory and industrial low-pressure monitoring |
| Width | 1 cm |
| Weight (Kg) | 0.005 kg |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 2 × 2 × 2 cm |
Overview
The TE Connectivity SM9235-BCE-S-300-002 Pressure Sensor, SMI, Gauge, 0 - 300 Pa, 3 -5.5 V, SOIC, made by TE CONNECTIVITY, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Pressure Type: Gauge
- Pressure Range: 0 to 300 Pa (quoted range is usually line-of-sight; walls and interference shorten it)
- Sensor Type: Silicon micromachined (SMI) low-pressure sensor (space for firmware, files or media)
- Output Type: Analog Voltage (match this to your power supply; too high a voltage can damage the part)
- Supply Voltage: 3 V-5.5 V (match this to your power supply; too high a voltage can damage the part)
- Accuracy: +/-1% F.S.
- Application: HVAC and medical respiratory and industrial low-pressure monitoring
- Width: 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Ultra-low pressure sensing: 125–600 Pa range
- High accuracy: Total Error Band <1% FS after autozero
- 16-bit I²C digital output for direct interfacing
- Temperature-compensated output: -20°C to +85°C
- JEDEC SOIC-16 package with dual vertical/horizontal ports
- Compact design, easy PCB integration
- Suitable for gage and differential pressure
- Factory-calibrated, fully digital signal processing
Package Includes:
1 x TE Connectivity SM9235-BCE-S-300-002 Pressure SensorQuick specs
- Pressure Type
- Gauge
- Pressure Range
- 0 to 300 Pa
- Sensor Type
- Silicon micromachined (SMI) low-pressure sensor
- Output Type
- Analog Voltage
- Supply Voltage
- 3 V-5.5 V
- Accuracy
- +/-1% F.S.








![CRG0402ZR, NEOHM - TE CONNECTIVITY, Zero Ohm Resistor, Jumper, 0402 [1005 Metric], 63 mW, 1 A, CRG — TE CONNECTIVITY](/_next/image?url=%2Fapi%2Fimg%3Furl%3Dhttps%253A%252F%252Frobu-prod-media.s3.ap-south-1.amazonaws.com%252Fuploads%252F2023%252F11%252FScreenshot-2023-11-07-160138.jpg&w=3840&q=75)










