
1 / 3 · Click to enlarge
AI Summary
A 40×40mm Peltier module that cools or heats when powered at 12V, 4A. It delivers up to 36W of heat transfer with no moving parts, ideal for compact DIY thermal projects.
Key Highlights
- 40×40mm module with 127 semiconductor couples for efficient heat transfer
- Operates at 12V DC, 4A, with maximum power of 36W
- Reverses hot and cold sides by swapping polarity
- Solid-state design: no vibration, no noise, long life
- Internal resistance 3.0–3.3 ohm and 250mm lead wires
- Lightweight at 30g, easy to integrate into small builds
Ideal For
- Electronics hobbyists building small cooling projects
- Engineering students learning about thermoelectric effects
- Makers designing compact enclosures with active thermal control
- DIY enthusiasts creating portable coolers or incubators
- Technicians repairing or upgrading small cooling systems
Buying Tip
Always mount a heat sink on the hot side before powering the module for more than a few seconds; without it, the Peltier will quickly reach thermal equilibrium and provide little cooling.
Elecvora expert review
Our verdict
The TEC1-12704 is a reliable, standard Peltier module that offers solid-state cooling and heating in a compact package. It performs well when paired with adequate heat sinking, making it a good choice for DIY thermal projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 40×40mm size fits small builds
- Can cool or heat by reversing polarity
- No moving parts means quiet, vibration-free operation
- Lightweight and easy to install
Cons
- Requires a heat sink and power supply not included
- Efficiency drops significantly without proper heat removal
- Not suitable for high-power cooling applications
Best for
DIY electronics projects needing compact spot cooling or heating
Not ideal for
Large-scale refrigeration or high-heat-load applications
Specifications
| Model No. / Name | TEC1 12704 |
|---|---|
| Operating Voltage (VDC) | 12 |
| Operating Current (A) | 4 |
| Max. Working Voltage (V) | 15 |
| Max. Power (W) | 36 |
| Internal Resistance (Ohm) | 3.0 to 3.3 |
| Wire Length(mm) | 250 |
| Length (mm) | 40 |
| Width (mm) | 40 |
| Weight (g) | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 5 × 5 × 5 cm |
What's in the box
- 1 × TEC1-12704 40×40mm Thermoelectric Cooler Peltier Module
Frequently Asked Questions
What power supply do I need for this module?
Can I use this module to heat as well as cool?
Do I need a heat sink?
What is included in the package?
How do I maintain the module?
What is the life expectancy of this module?
Overview
The TEC1-12704 is a thermoelectric cooler (also called a Peltier module) that acts as a small heat pump. When DC power is applied, heat is moved from one face of the module to the other, producing a cold side and a hot side. Reversing the supply polarity swaps which side is hot and which is cold, so the same module can be used for either cooling or heating. With a 40×40mm footprint and 127 semiconductor couples, it is a compact solid-state component for projects that need spot thermal control without moving parts.
Key Features
- Dual-function operation: cools or heats depending on polarity.
- Solid-state construction: no vibration, no noise, and no wear from moving parts.
- Compact size: 40×40mm square fits tight spaces.
- Ready to wire: comes with 250mm lead wires.
- Lightweight: approximately 30g.
Specifications Explained
Operating voltage and current: The module is designed for 12V DC at 4A. This means it needs a power supply capable of delivering at least 4A at 12V for full performance. The maximum working voltage is 15V, but staying at or below the rated 12V is recommended for normal use.
Maximum power: At 36W, the module can transfer a significant amount of heat for its size, making it suitable for small cooling tasks. However, actual cooling performance depends on how effectively heat is removed from the hot side.
Internal resistance: The 3.0–3.3 ohm resistance is a normal range for this model and helps you estimate power draw if you need to match it to a supply.
Dimensions and weight: The 40×40mm face and 30g weight make it easy to mount on small surfaces or inside enclosures.
Compatibility and Requirements
This module requires a DC power supply that can provide 12V at 4A. It does not include a heat sink, so you must attach one to the hot side before applying power for more than a few seconds. A computer CPU heat sink or a comparable metal block with a fan is commonly used. The 250mm lead wires can be connected directly to your supply; reversing the polarity reverses the hot and cold sides. No controller or driver is included.
Typical Uses
Common applications include small refrigerators, CPU and CCD cooling, medical instruments, portable coolers, and DIY electronics projects that need localized cooling or heating. The module is also used in educational demonstrations of the Peltier effect and in projects that require a compact, vibration-free thermal solution.
What's in the Box
1 × TEC1-12704 40×40mm Thermoelectric Cooler Peltier Module.
Quick specs
- Model No. / Name
- TEC1 12704
- Operating Voltage (VDC)
- 12
- Operating Current (A)
- 4
- Max. Working Voltage (V)
- 15
- Max. Power (W)
- 36
- Internal Resistance (Ohm)
- 3.0 to 3.3













