Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pair of 1-meter red and black test leads with nickel-plated crocodile clips and silicone insulation. The 10mm jaw opening and 30V AC/60V DC rating make them handy for low-voltage testing with multimeters and power supplies.

Key Highlights

  • 1-meter red and black test leads with crocodile clips
  • Nickel-plated clips with 10mm maximum jaw opening
  • Silicone insulation for flexibility and heat resistance
  • Standard 16–18 AWG wire size
  • Rated for 30V AC and 60V DC
  • Lightweight pair at approximately 26 grams total

Ideal For

  • Electronics hobbyists and makers
  • Students learning circuit testing
  • Technicians doing low-voltage diagnostics
  • DIY enthusiasts working on automotive or hobby projects

Buying Tip

Check that your multimeter or tester accepts the connector on the non-clip end of these leads, as the plug type is not specified.

Elecvora expert review

Our verdict

These leads offer a practical, no-frills solution for low-voltage testing where a quick clip-on connection is needed. The silicone insulation and nickel-plated clips are thoughtful touches at this price point, though the unspecified connector type may require you to check compatibility with your instrument.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Silicone insulation stays flexible and resists heat
  • Nickel-plated clips reduce corrosion
  • 10mm jaw opening fits many common test points
  • Colour-coded pair simplifies polarity checks

Cons

  • Connector type at the non-clip end is not specified
  • Voltage rating limits use to low-voltage circuits only

Best for

Low-voltage bench testing and quick temporary connections

Not ideal for

Mains voltage or high-power applications

Specifications

Item TypeCrocodile Clip
Clip TypeAligator
Cable Length1 meter
Weight (g)26 (Both probe)
Insulation MaterialSilicon
Wire Size (AWG)Standard 16-18 AWG
Voltage Rating30V AC, 60V DC
Additional Specs.Aligator Clip Jaw Opening: 10mm (Max)
ColorRed+Black
Shipping Weight0.03 kg
Shipping Dimensions8 × 5 × 2 cm

What's in the box

  • 1 x Red test lead with crocodile clip, 1 meter
  • 1 x Black test lead with crocodile clip, 1 meter

Frequently Asked Questions

What is the maximum jaw opening of the crocodile clips?
The clips open to a maximum of 10mm, which is suitable for gripping most small terminals, wires, and component leads.
Can these leads be used with any multimeter?
They are compatible with multimeters and testers that accept the connector on the non-clip end, but the exact connector type is not specified, so check your instrument's input before purchasing.
What is the voltage rating?
The leads are rated for 30V AC and 60V DC. Do not use them on circuits exceeding these limits.
What is included in the package?
You receive one red test lead with crocodile clip (1 meter) and one black test lead with crocodile clip (1 meter).
How should I care for these test leads?
Keep the clips clean and dry, avoid sharp bends in the cable, and store the leads coiled loosely to prevent damage to the silicone insulation.
Are the clips corrosion-resistant?
Yes, the crocodile clips are nickel-plated, which helps resist corrosion and maintain good electrical contact.

Overview

This pair of test leads is a practical accessory for anyone who needs to make quick, temporary connections in low-voltage electronics work. Each lead is one meter long and terminates in a nickel-plated crocodile clip with a maximum jaw opening of 10mm. The red and black colours let you distinguish polarity at a glance, which is helpful when testing circuits or power supplies. The wire uses silicone insulation and is sized at standard 16–18 AWG, giving a balance of flexibility and current-carrying capability for typical bench tasks. The clips are nickel-plated to resist corrosion, and the silicone cover remains pliable in cooler conditions. With a voltage rating of 30V AC and 60V DC, these leads are intended for low-voltage applications only.

Key Features

  • Colour-coded pair: One red and one black lead help you identify positive and negative connections quickly.
  • Crocodile clips: Nickel-plated alligator clips with a 10mm maximum jaw opening for gripping wires, terminals, and component legs.
  • Silicone insulation: Flexible and heat-resistant covering that stays supple in cooler temperatures.
  • Standard wire size: 16–18 AWG wire is suitable for low-voltage testing and light current loads.
  • Lightweight: The pair weighs approximately 26 grams, so the leads add negligible weight to your setup.

Specifications Explained

Clip type and jaw opening: The alligator clips open to a maximum of 10mm, which is enough to clamp onto most through-hole component leads, small terminals, and wires up to about 10mm in diameter. The nickel plating helps maintain a clean contact surface and reduces corrosion over time.

Cable length and wire size: At one meter, each lead gives you reasonable reach across a workbench without excessive slack. The 16–18 AWG wire is a common size for test leads, offering a good compromise between flexibility and durability for low-voltage work.

Insulation material: Silicone insulation is more flexible than PVC, especially in cold conditions, and can tolerate higher temperatures. This makes the leads easier to route around components and less likely to stiffen over time.

Voltage rating: The 30V AC and 60V DC rating means these leads are designed for low-voltage circuits, such as those found in battery-powered devices, development boards, and low-voltage power supplies. Do not use them on mains voltages or any circuit exceeding these limits.

Compatibility and Requirements

These test leads are compatible with multimeters, testers, and power supplies that accept standard banana or probe connections, although the specific connector type at the non-clip end is not specified. The crocodile clips themselves can attach to a wide range of test points. No additional accessories are required to use the leads, but you will need a compatible measuring instrument or power source. Always observe the 30V AC / 60V DC rating and never exceed it.

Typical Uses

  • Low-voltage circuit testing with a multimeter
  • Quick connections to power supplies for bench testing
  • Checking continuity in cables and assemblies
  • Temporary connections in prototyping and educational projects
  • General electrical testing in automotive and hobby electronics (within voltage limits)

What's in the Box

The package includes one red test lead with crocodile clip (1 meter) and one black test lead with crocodile clip (1 meter).

Quick specs

Item Type
Crocodile Clip
Clip Type
Aligator
Cable Length
1 meter
Weight (g)
26 (Both probe)
Insulation Material
Silicon
Wire Size (AWG)
Standard 16-18 AWG
See all specifications