
1 / 7 · Click to enlarge
AI Summary
This expansion shield lets you plug 3.2" to 5" TFT LCD modules directly onto an Arduino MEGA. It supports 16-bit mode and allows simultaneous use of the SD card and touch functions.
Key Highlights
- Directly accepts 3.2" to 5" TFT LCD modules
- Designed for Arduino MEGA compatibility
- Operates at 3.3V for safe display interfacing
- Supports 16-bit data mode for faster updates
- Enables SD card and touch use at the same time
- Compact 90mm x 53mm board weighs only 12g
Ideal For
- Arduino MEGA users adding a TFT display
- Makers building touchscreen interfaces
- Students learning display interfacing
- Prototypers needing SD card and touch together
- DIY electronics hobbyists
Buying Tip
Confirm that your TFT module uses a 3.3V interface and matches the shield's pinout before purchasing.
Elecvora expert review
Our verdict
A straightforward solution for connecting 3.3V TFT displays to an Arduino MEGA without custom wiring. It handles the voltage difference and enables simultaneous SD and touch use, though it requires a compatible display module.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Eliminates manual wiring between MEGA and TFT
- Supports 16-bit mode for better performance
- Allows SD card and touch to work together
- Compact and lightweight design
Cons
- Requires a separate 3.3V-compatible TFT module
- Limited to Arduino MEGA form factor
- No documentation included
Best for
Arduino MEGA users wanting a clean TFT display connection
Not ideal for
Users with 5V-only displays or non-MEGA boards
Specifications
| Model No. / Name | Expansion Shield |
|---|---|
| Compatibility | Mega |
| Operating Voltage (VDC) | 3.3 |
| Length (mm) | 90 |
| Width (mm) | 53 |
| Weight (g) | 12 |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 7 × 5 × 3 cm |
What's in the box
- 1 x TFT LCD Mega Shield V2.2
Frequently Asked Questions
Which Arduino boards is this shield compatible with?
What size TFT displays can I use?
Does the shield provide 3.3V power to the display?
Can I use the SD card and touch screen at the same time?
What is included in the package?
Do I need to solder anything?
Overview
The TFT LCD Expansion Shield V2.2 is an interface board that bridges 3.3V TFT LCD modules and the Arduino MEGA. Many popular TFT displays, such as 3.2-inch to 5-inch modules, run at 3.3V and cannot be connected directly to the MEGA's 5V pins. This shield solves that by routing power and signals correctly, letting you plug the display into the MEGA's headers without extra wiring. It is a practical choice for anyone who wants a clean, reliable connection for graphics-heavy projects.
Key Features
- Direct plug-in: The shield stacks onto the Arduino MEGA, and the TFT module plugs into the shield.
- 16-bit mode support: Enables faster data transfer for smoother graphics compared to 8-bit modes.
- Simultaneous SD and touch: The MEGA's pin count allows both the SD card interface and touch screen to be used at the same time.
- 3.3V operation: Matches the voltage requirements of common TFT LCD modules.
- Compact footprint: Measures 90mm by 53mm and weighs only 12 grams, adding minimal bulk.
Specifications Explained
Operating voltage (3.3V): This is the voltage the shield and connected display expect. It is not 5V-tolerant, so ensure your power source is regulated to 3.3V where required. Compatibility: The shield is designed for the Arduino MEGA form factor. Display size support: It accepts TFT modules from 3.2 inches up to 5 inches. 16-bit mode: This refers to the data bus width; a wider bus means more data per transfer, which can improve refresh rates. Dimensions and weight: The board is 90mm long, 53mm wide, and weighs 12g, making it easy to integrate into portable or space-constrained builds.
Compatibility and Requirements
This shield is compatible with Arduino MEGA boards. It supports TFT LCD modules sized 3.2", 4.3", 5.0", and 7.0" (note: the product data specifies 3.2" to 5" in some places and 7.0" in others; verify your module's pinout). The shield requires a 3.3V supply for the display logic. No additional components are included beyond the shield itself. You will need your own Arduino MEGA board and TFT LCD module.
Typical Uses
- Adding a graphical user interface to MEGA-based projects
- Data logging with on-screen display and SD card storage
- Touch-controlled menus and buttons
- Educational demonstrations of display interfacing
- Portable instrument panels
What's in the Box
1 x TFT LCD Mega Shield V2.2. No other items are included.
Quick specs
- Model No. / Name
- Expansion Shield
- Compatibility
- Mega
- Operating Voltage (VDC)
- 3.3
- Length (mm)
- 90
- Width (mm)
- 53
- Weight (g)
- 12













