
1 / 7 · Click to enlarge
At a glance
Made by TinySA, this pocket hole jig is a good fit for everyday home and hobby use.
Key Highlights
- Small and easy to carry or mount
Ideal For
- Use on the go
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Overview
The TinySA Handheld Spectrum Analyzer 2.8 Inch Touchscreen 100kHz to 960MHz Frequency Range RF Signal Generator Portable USB Powered, made by TinySA, is listed in our pocket hole jig range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Specifications:
Housing Material: ABS
Dimensions: 58.7mm x 91.3mm x 17.1mm (excluding protruding parts)
Frequency Accuracy: <2ppm
Frequency Stability: <1ppm
Display: 2.8-inch TFT (320 x 240) resistive touchscreen
USB Interface: Type-C, CDC (serial communication mode)
Power Source: USB 5V, 150mA; internal 650mAh battery with max charging current of 300mA. Charging time: 1-2 hours
Low Input Mode:
Frequency Range: 100kHz–350MHz
Input Attenuation: Manual and automatic; 0dB–31dB, adjustable in 1dB steps
Maximum Input Level: +10dBm with no attenuation; damage occurs at +20dBm
Minimum Detectable Signal: -102dBm @ 30kHz RBW
Phase Noise: -90dB/Hz @ 100kHz offsets; -115dB/Hz @ 1MHz offsets
Resolution Bandwidth Options: 3, 10, 30, 100, 300, 600kHz, with auto-selection available
High Input Mode:
Frequency Range: 240MHz–960MHz
Impedance: Frequency-dependent; varies from 50Ω
Minimum Detectable Signal: -115dBm @ 30kHz RBW
Resolution Bandwidth Options: Same as low input mode
Output Mode:
Low Output:
Frequency Range: 100kHz–350MHz
Output Level: Adjustable from -76dBm to -6dBm in 1dB steps
Signal Type: Sine wave (harmonics suppressed by >40dB)
High Output:
Frequency Range: 240MHz–960MHz
Output Level: Adjustable from -38dBm to +13dBm
Signal Type: SW
Reference Signal Generator:
Available Frequencies: 1MHz, 2MHz, 4MHz, 10MHz, 15MHz, 30MHz
Signal Type: SW
Power Level: Approx. -25dBm
Features:
1.Wide Frequency Coverage: Supports signal analysis and generation for a broad spectrum of frequencies (100kHz to 960MHz), making it versatile for RF testing scenarios.
2.Compact and Portable Design: With dimensions of 58.7mm x 91.3mm x 17.1mm, this handheld device is travel-friendly and convenient for on-site measurements.
3.Powerful Display: Equipped with a 2.8-inch color TFT touchscreen, enabling clear visualizations and intuitive interactions for real-time frequency analysis.
4.Multiple Input Modes: Includes low-input and high-input modes tailored for signal clarity across varied ranges, with adjustable attenuation for precise measurements.
5.Flexible Output Options: Offers sine wave andsquare wave signals with modulations, enabling basic RF output testing and communications troubleshooting.
Package Included:
1 x Spectrum Analyzer Set



















