Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by TinySA, this electronics is a good fit for makers, students and electronics hobbyists.

Key Highlights

  • Small and easy to carry or mount

Ideal For

  • Use on the go
  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The TinySA ULTRA Plus ZS406 Handheld Spectrum Analyzer 900MHz-5.4GHz 20dB LNA Module 3.98 inch IPS-TFT LCD 5000mAh Battery Portable Analyzer, made by TinySA, is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

- Display Size: 3.98” IPS-TFT LCD (480x320)

- Max Low Input Frequency: 900MHz

- Max High Input Frequency: 5.4GHz in Ultra mode

- Resolution filters in 1,3,10 steps: From 200Hz to 850kHz

- Max Output Frequency: Sinus up to 900MHz, Square waves up to 4.4GHz

- Output Level:  -115dBm to -19dBm

- Ultra Mode: Level calibrated up to 6GHz

- Internal LNA Gain: 20dB up to 4GHz

- Displayed Points per Scan: Max 450

- 0-350MHz Scan Time: 165ms

- Shortest Zero Span Time: 14 ms for 450 points

- DANL at 100MHz: -153dBm/Hz (LNA Off), -169dBm/Hz (LNA On)

- DANL Degrading in Ultra Mode: 5dB above 3GHz, 20dB above 5.4GHz

- Phase Noise at 10kHz Offsets: -92dBc/Hz

- Phase Noise at 100kHz Offsets: -108dBc/Hz

- Input 1dB Compression Level: +0.5dBm (LNA Off), -26.5dBm (LNA On)

- IIP3 Without LNA: +18dBm (at 2MHz apart), 0dBm (500Hz apart)

- IIP3 With LNA: -8dBm (at 2MHz apart)

- Frequency Stability: <1ppm (-10℃ ~ +55℃)

- SD Card Slot: Micro SD card

- Audio Out: 3.5mm headphone plug

- FW Update Mode Activation: Push jog button before switch on

- Maximum Current Consumption: 350mA

- Maximum Charging Current: 1300mA

- Battery: Li-polymer 3.7V 5000mAh

- RF Connectors: SMA Female

- Communication Interface: USB-CDC(Type-C), UART-TTL(2.54mm Connector)

- Appearance Size: 117x72x23mm (Excluding protruding parts)

 

Features:

1. Broad Frequency Range: Operates from 900MHz up to 5.4GHz in Ultra mode, allowing for extensive testing and analysis capabilities in a compact device.   

2. High-Resolution Display: Features a 3.98” IPS-TFT LCD (480x320) screen, providing clear and precise vision feedback for better data analysis.

3. Internal LNA Gain: Boosts signal up to 20dB for enhanced signal clarity and performance, even in demanding environments.

4. Extended Battery Life: Powered by a robust 3.7V 5000mAh Li-polymer battery, ensuring prolonged operational time without frequent recharges.

5. Compact and Portable: With dimensions of 117x72x23mm, it is designed for convenience and ease of use, making it ideal for professionals on the go.

 

Package Included:

1 x TinySA ULTRA Plus ZS406 Spectrum Analyzer





Product Safety Information