Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 333mm deadcat freestyle frame in 3K carbon fibre with 6mm boomerang arms and dual 30.5x30.5mm or 20x20mm stack mounting. Its centred DJI Air Unit layout and prop-free camera view make it a practical base for HD freestyle builds.

Key Highlights

  • 333mm wheelbase deadcat frame with boomerang arms for a prop-free camera view
  • 6mm thick arms plus 3mm bottom and 2.5mm top carbon plates
  • Dual 30.5x30.5mm and 20x20mm mounting holes for common stacks
  • Camera plate supports 19x19mm and 22x22mm cameras with TPU inserts
  • Centred DJI Air Unit and stack placement for balanced weight
  • Includes TPU mounts, arm guards, battery straps and anti-slip mat

Ideal For

  • FPV freestyle pilots building a 333mm-class quad
  • Pilots installing a DJI Air Unit in an HD build
  • Builders who want a deadcat frame with a clean camera view
  • Makers using 30.5x30.5mm or 20x20mm stacks
  • Flyers who prefer carbon freestyle frames with TPU protection

Buying Tip

Check your flight controller's mounting pattern and your camera size against the 30.5x30.5mm or 20x20mm holes and 19x19mm or 22x22mm camera support before ordering, since motors and electronics are not included.

Elecvora expert review

Our verdict

A well-equipped carbon freestyle frame that makes HD builds easier thanks to its deadcat layout and DJI-specific TPU parts. The dual stack patterns and included accessories reduce the extra parts you need to source.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Deadcat arms keep props out of the camera view
  • 6mm arms and 3mm bottom plate give a stiff structure
  • Supports both 30.5x30.5mm and 20x20mm stacks
  • DJI Air Unit bracket and antenna mount included
  • Comes with arm guards, straps and anti-slip mat

Cons

  • Motors, electronics, camera and battery are not included
  • No motor size or propeller limits are specified, so check clearance yourself
  • Builders must confirm camera and stack sizes before assembly

Best for

HD freestyle builds around a DJI Air Unit

Not ideal for

Pilots wanting a pre-assembled or bind-and-fly quad

Specifications

Item TypeFrame
Model No. / NameFPV Frame
Dimensions (L x W x H) mm183*287
Distance(mm)35 (Bottom-to-top)
Arm thickness (mm)6mm
Bottom Plate Thickness(mm)3
Top plate thickness (mm)2.5mm
Camera plate thickness (mm)1.5mm( 2.5mm included TPU inserts)
Mounting Hole Diameter (mm)30.5*30.5mm / 20*20mm
Support camerasize: 19*19mm 22*22mm
Shipping Weight0.302 kg
Shipping Dimensions16 × 8 × 4 cm

What's in the box

  • 1 x TITAN DC7 HD frame
  • 1 x screw bag
  • 1 x TPU camera mount adapters
  • 4 x arm guard / motor mount
  • 1 x TPU bracket mount for DJI Air Unit
  • 1 x TPU antenna mount for DJI Air Unit antenna
  • 1 x TPU bottom plate front protective mount
  • 1 x TPU bottom plate rear protective mount
  • 1 x battery anti-slip mat
  • 2 x battery straps

Frequently Asked Questions

What wheelbase does this frame have?
It has a 333mm wheelbase with overall dimensions of 183 x 287mm and 35mm of clearance between the bottom and top plates.
Which flight controllers fit this frame?
The frame has both 30.5x30.5mm and 20x20mm mounting holes, so stacks and flight controllers using either pattern can be fitted.
Which cameras can I install?
The camera plate supports 19x19mm and 22x22mm cameras, using the included 2.5mm TPU inserts on the 1.5mm plate.
Is the DJI Air Unit supported?
Yes. The package includes a TPU bracket mount for the DJI Air Unit and a TPU antenna mount for its antenna, and the layout centres the unit for balanced weight.
Are motors and electronics included?
No. The frame ships with the carbon parts and TPU accessories only, so motors, electronics, propellers, battery and radio gear must be bought separately.
How should I care for the carbon frame?
Inspect the arms and plates for cracks or delamination after crashes, and recheck screw tightness and TPU mounts before each flying session.

Overview

The TITAN DC7 HD is a freestyle frame with a 333mm wheelbase and a deadcat arm configuration. Instead of a symmetrical X layout, the arms are set so the propellers stay outside the camera's field of view, which matters when you are recording HD footage and want a clean image without props in frame.

The airframe is built from 3K carbon fibre with chamfered boomerang arms. Arms measure 6mm thick, the bottom plate is 3mm, the top plate is 2.5mm and the camera plate is 1.5mm with 2.5mm TPU inserts. The design centres the DJI Air Unit and the flight stack to keep weight distribution even.

Key Features

  • Deadcat geometry with boomerang arms for a propeller-free camera view
  • 6mm carbon arms and a 3mm bottom plate for a stiff, freestyle-ready structure
  • Mounting holes for both 30.5x30.5mm and 20x20mm stacks
  • Camera plate compatible with 19x19mm and 22x22mm cameras
  • TPU bracket and antenna mount included for the DJI Air Unit
  • Arm guards, battery straps and an anti-slip battery mat in the box

Specifications Explained

Wheelbase and dimensions

The 333mm wheelbase places this frame in the larger freestyle class, giving room for bigger props and a stable platform. Overall dimensions are 183 x 287mm, with 35mm of clearance between the bottom and top plates for the stack and wiring.

Carbon thickness

At 6mm, the arms are the stiffest part of the frame, which helps resist flex during aggressive freestyle flying. The 3mm bottom plate carries the stack and battery load, while the 2.5mm top plate closes the sandwich. The 1.5mm camera plate uses 2.5mm TPU inserts to add cushioning around the camera.

Mounting and camera support

Both 30.5x30.5mm and 20x20mm hole patterns are provided, so you can fit a wide range of flight controllers and stacks without an adapter. The camera plate accepts 19x19mm and 22x22mm cameras, covering common HD and analogue options.

Compatibility and Requirements

The frame is designed around the DJI FPV system, with a dedicated TPU bracket mount for the DJI Air Unit and a TPU antenna mount for its antennas. Stacks and flight controllers must use either the 30.5x30.5mm or 20x20mm mounting pattern. Cameras must be 19x19mm or 22x22mm. Motors, electronics, propellers, battery and radio gear are not included and must be selected separately.

Typical Uses

This frame suits freestyle pilots who want a durable carbon platform for HD recording, and builders assembling a quad around a DJI Air Unit. The deadcat layout is particularly useful for cinematic and cruising flights where a clean camera view is important.

What's in the Box

  • 1 x TITAN DC7 HD frame
  • 1 x screw bag
  • 1 x set of TPU camera mount adapters
  • 4 x arm guard / motor mount
  • 1 x TPU bracket mount for DJI Air Unit
  • 1 x TPU antenna mount for DJI Air Unit antenna
  • 1 x TPU bottom plate front protective mount
  • 1 x TPU bottom plate rear protective mount
  • 1 x battery anti-slip mat
  • 2 x battery straps

Quick specs

Item Type
Frame
Model No. / Name
FPV Frame
Dimensions (L x W x H) mm
183*287
Distance(mm)
35 (Bottom-to-top)
Arm thickness (mm)
6mm
Bottom Plate Thickness(mm)
3
See all specifications