
1 / 4 · Click to enlarge
AI Summary
A compact AC/DC adapter delivering up to 20.0V and 5.0A through an XT60 connector, with 100W of output and universal 100-240V mains input. It gives XT60-equipped chargers and bench devices a clean, portable power source.
Key Highlights
- 100W output ceiling for chargers and DC bench devices
- 20.0V maximum output with up to 5.0A current
- XT60 connector for direct plug-in to compatible gear
- Universal AC 100-240V 50/60Hz input for travel
- Rated for -10°C to 40°C operating environments
- Compact, lightweight body at 0.215 kg shipping weight
Ideal For
- RC hobbyists powering XT60-equipped chargers at home
- FPV pilots who need a compact supply for bench and field work
- Technicians testing low-voltage DC electronics
- Makers and tinkerers building XT60-based power setups
Buying Tip
Check that your charger or device accepts up to 20.0V and stays under 5.0A before buying, since the ADP100 delivers a fixed output within those limits.
Elecvora expert review
Our verdict
The ADP100 is a straightforward, no-fuss power supply for anyone whose gear already uses XT60 and stays within 20.0V and 5.0A. It trades adjustability for simplicity and portability, which suits most hobby bench and field scenarios.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Universal 100-240V input travels well
- XT60 output matches common RC and FPV gear
- Compact and light for field use
- Clear 100W, 20.0V and 5.0A ratings
Cons
- Fixed output, no voltage or current adjustment
- Limited to 5.0A, so high-draw setups need a larger supply
- Requires devices with an XT60 input
Best for
Hobbyists powering XT60 chargers and small DC devices within 100W
Not ideal for
High-current charging setups that exceed 5.0A or need adjustable voltage
Specifications
| Item Type | Adapter |
|---|---|
| Power Output | 100W |
| Operating Temperature (°C) | -10°C to 40°C |
| Input Voltage | AC 100-240V 50/60Hz |
| Input current | MAX 1A |
| Output Voltage | MAX 20.0V |
| Output Current (A) | MAX 5.0 |
| Connector Type | XT60 |
| Shipping Weight | 0.215 kg |
| Shipping Dimensions | 19 × 12 × 5 cm |
What's in the box
- 1 x ToolKitRC ADP100 100W 20.0V 5A Power Supply Unit with XT60 Output
Frequently Asked Questions
What devices can the ADP100 power?
Does it work in different countries?
What connector does it use?
Can I adjust the output voltage?
What is included in the package?
How should I store and use it?
Overview
The ToolKitRC ADP100 is a desktop AC/DC power supply built to feed DC equipment that uses an XT60 connection. It takes standard mains power and delivers a regulated DC output of up to 20.0V at a maximum of 5.0A, for a total output ceiling of 100W. Rather than a bulky lab supply with dials and terminals, it is a sealed adapter-style unit that you simply plug in and connect.
Because the input accepts AC 100-240V at 50/60Hz, the same unit can be used across different mains standards, which is handy if you move between regions or travel with your charging setup. Mains draw is capped at 1A, keeping the load on your socket modest.
Key Features
- 100W output: enough headroom for chargers and DC devices rated within that envelope.
- 20.0V / 5.0A maximums: a fixed DC feed with clearly stated limits.
- XT60 output: plugs straight into XT60-equipped chargers, boards and leads.
- Universal input: AC 100-240V, 50/60Hz, maximum 1A input current.
- Wide operating range: rated from -10°C to 40°C.
- Compact build: light enough to carry with your field kit.
Specifications Explained
Power and voltage
The 100W figure is the ceiling for total output. Voltage tops out at 20.0V and current at 5.0A, so in practice the unit supplies whatever your device draws within those limits. Devices expecting a lower voltage or lower current draw are the natural match; check your equipment's input rating before connecting.
Input flexibility
The AC 100-240V, 50/60Hz input range means the adapter is not tied to one country's mains voltage. Maximum input current is 1A, which reflects the modest draw of a 100W-class supply.
Connector and environment
Output is via XT60, a common connector in RC and FPV gear, so no adapter lead is needed for XT60-native devices. The -10°C to 40°C operating range covers cold garages through to warm workshops.
Compatibility and Requirements
The ADP100 is intended for DC devices that accept up to 20.0V and draw no more than 5.0A, and that use an XT60 input. Confirm your device's voltage and current requirements match before use. A suitable mains socket within the 100-240V range is all that is required to operate it.
Typical Uses
- Powering ToolkitRC chargers and similar XT60-equipped charging gear
- Bench testing RC and FPV electronics that run on DC
- Field charging sessions where a compact mains supply is preferred
- Workshop power for small DC gadgets and accessories
What's in the Box
1 x ToolKitRC ADP100 100W 20.0V 5A Power Supply Unit with XT60 Output.
Quick specs
- Item Type
- Adapter
- Power Output
- 100W
- Operating Temperature (°C)
- -10°C to 40°C
- Input Voltage
- AC 100-240V 50/60Hz
- Input current
- MAX 1A
- Output Voltage
- MAX 20.0V



















