Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A directional circularly polarized 5.8GHz patch antenna offering 9.4 dBi gain and a 55-degree beam width for FPV receivers. It includes a semi-rigid SMA male to SMA male coax so you can mount it away from your ground station.

Key Highlights

  • 9.4 dBi directional gain for extended 5.8GHz receive range
  • Circularly polarized triple feed design with good off-axis axial ratio
  • 55-degree half-power beam width in horizontal and vertical planes
  • 0.835 radiation efficiency keeps signal loss low
  • SMA male connector with semi-rigid SMA male to SMA male coax included
  • Compact and lightweight for easy mounting on masts and tripods

Ideal For

  • FPV pilots running directional receive antennas on ground stations
  • Fixed-wing and long-range cruisers flying within a known sector
  • Pilots upgrading from linear whips to circular polarization
  • Ground station builders mounting antennas on masts and tripods
  • Hobbyists experimenting with 5.8GHz patch antenna designs

Buying Tip

Plan your antenna aiming before you fly: with a 55-degree beam width, a mast or tripod that lets you point the patch toward your flight area makes far more difference than raw gain alone.

Elecvora expert review

Our verdict

A sensible directional option for FPV pilots who want circular polarization and solid efficiency at 5.8GHz without spending much. The triple feed design and good off-axis axial ratio make it more forgiving to aim than a basic patch.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Good radiation efficiency for a 5.8GHz patch
  • Circular polarization with usable axial ratio off-centre
  • 55-degree beam width is predictable to aim
  • Semi-rigid SMA coax included for remote mounting
  • Lightweight and easy to mount

Cons

  • Directional pattern means poor reception behind the antenna
  • No terminator included, so unused ports need attention
  • Rubber cap shown in some images is discontinued

Best for

FPV pilots flying within a known sector who want a directional circularly polarized receive antenna

Not ideal for

Pilots who need all-round coverage or fly frequently behind their ground station

Specifications

Item TypeAntenna
Gain9.4 dBi
Half power beam width55° (horizontal and vertical)
Radiation Efficiency0.835
Shipping Weight0.022 kg
Shipping Dimensions13 × 9 × 1 cm

What's in the box

  • 1 x Triple Feed Patch 5.8GHz Antenna (SMA)
  • 1 x semi-rigid coax, SMA male to SMA male

Frequently Asked Questions

What connector does this antenna use?
The antenna has an SMA male connector, and the included semi-rigid coax is SMA male to SMA male. Check that your receiver or goggle module accepts SMA before ordering.
Is this antenna directional?
Yes. It is a directional circularly polarized patch with a 55-degree half-power beam width in both planes, so it needs to be aimed toward your flight area.
What is included in the package?
You receive one Triple Feed Patch 5.8GHz Antenna and one semi-rigid coax cable with SMA male connectors on both ends.
Does it come with a terminator?
No, a terminator is not included. The rubber cap shown in some product images has also been discontinued by the supplier.
What gain and efficiency does it offer?
The antenna is rated at 9.4 dBi gain with a radiation efficiency of 0.835, and it uses circular polarization with a good axial ratio off-centre.
How should I care for the antenna?
Keep the radiating face clean and dry, avoid bending the semi-rigid coax sharply, and support the cable so the connector is not loaded by movement.

Overview

The Triple Feed Patch 5.8GHz Antenna is a directional, circularly polarized antenna intended for FPV video reception and similar 5.8GHz links. Rather than radiating in every direction, it concentrates sensitivity in a defined forward pattern, which helps when you know roughly where your aircraft will be flying. The triple feed construction is the key detail here: it supports circular polarization and keeps the axial ratio reasonable not only straight ahead but also when the signal arrives slightly off the antenna's centre line.

With 9.4 dBi of gain and a radiation efficiency of 0.835, this patch is designed to make efficient use of the signal it captures. The supplied semi-rigid coax lets you position the antenna away from the receiver or goggle module, which is useful when you want the patch on a mast or tripod while your gear stays on the ground.

Key Features

  • Directional circular polarization: reduces multipath interference compared with simple linear antennas.
  • 9.4 dBi gain: focuses reception forward for longer usable links.
  • 55-degree beam width: the same in both horizontal and vertical planes, so aiming is predictable.
  • 0.835 radiation efficiency: a healthy figure for a 5.8GHz patch design.
  • SMA male connection: matches common FPV receiver and goggle module inputs.
  • Semi-rigid coax included: SMA male to SMA male, for flexible mounting.

Specifications Explained

Gain and beam width

Gain of 9.4 dBi means the antenna concentrates its sensitivity into a forward lobe rather than spreading it around. The 55-degree half-power beam width tells you how wide that lobe is: you get useful performance within roughly 55 degrees of the centre axis in both planes, then sensitivity falls away. In practice this rewards deliberate aiming and penalises flying far behind yourself.

Radiation efficiency

Efficiency of 0.835 describes how much of the captured energy is usefully delivered rather than dissipated. Patch antennas at 5.8GHz are often lossy, so this figure is worth noting when comparing options.

Polarization and axial ratio

Circular polarization with a good axial ratio, including off-centre, means the antenna copes better when your aircraft is not perfectly aligned with the patch. This generally translates into more consistent video as you manoeuvre.

Compatibility and Requirements

The antenna uses an SMA male connector and the included coax is SMA male to SMA male. Check that your receiver, goggle module or ground station accepts an SMA connection before ordering. A terminator is not included, and the rubber cap shown in some images has been discontinued by the supplier.

Typical Uses

This patch suits FPV ground stations where a directional receive antenna is wanted: fixed-wing and long-range flying, mountain surfing, and any setup where you fly within a known sector. It also works for telemetry and video receive installations on 5.8GHz that call for a compact directional antenna on a mast.

What's in the Box

  • 1 x Triple Feed Patch 5.8GHz Antenna (SMA)
  • 1 x semi-rigid coax, SMA male to SMA male

Quick specs

Item Type
Antenna
Gain
9.4 dBi
Half power beam width
55° (horizontal and vertical)
Radiation Efficiency
0.835
Shipping Weight
0.022 kg
Shipping Dimensions
13 × 9 × 1 cm
See all specifications