Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
TTGO SX1278 LoRa 433MHz ESP32 WiFi Bluetooth Module with Antenna — image 1
Hover to zoom

1 / 4 · Click to enlarge

TTGO SX1278 LoRa 433MHz ESP32 WiFi Bluetooth Module with Antenna

Color
AI Summary
Battery Protection Module for everyday users

The TTGO SX1278 LoRa 433MHz ESP32 WiFi Bluetooth Module with Antenna is a value-for-money battery protection module designed for everyday users. It features One Package Weight: 0.03kgs / 0.06lb and One Package Size: 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch.

wireless convenience
₹1,480
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,480
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.03kgs / 0.06lb
One Package Size: 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch
Best Sellers Rank (Consumer Electronics): #6886
Best Sellers Rank (Consumer Electronics > DIY Parts & Components ): #155
Best Sellers Rank (Consumer Electronics > DIY Parts & Components > Module): #73

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-DIY5111Category: Battery Protection Module

About This Product

The TTGO SX1278 LoRa 433MHz ESP32 WiFi Bluetooth Module with Antenna is a value-for-money battery protection module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.03kgs / 0.06lb
  • One Package Size: 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch
  • Best Sellers Rank (Consumer Electronics): #6886
  • Best Sellers Rank (Consumer Electronics > DIY Parts & Components ): #155
  • Best Sellers Rank (Consumer Electronics > DIY Parts & Components > Module): #73

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Feature: 1. The main chip adopts Lexin ESP32, Tensilica LX6 dual-core processor, main frequency 240MHz, computing power up to 600DMIPS, built-in 520KB SRAM, 802.11 b/g/n HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual Modular Bluetooth (traditional Bluetooth and BLE low energy Bluetooth). 2. This product is based on WIFI 32 with the addition of SX1278 chip, namely LoRa remote modem, 433MHz frequency, about -148dBm high sensitivity, +20dBm power output, high reliability. 3. Onboard 16M bytes (128Mb bits), Wi-Fi antenna, lithium battery charging circuit and interface, CP2102 USB to serial chip, support Arduino development environment, can perform program verification and product development simply and quickly. Specification: 1. Operating voltage: 3.3V to 7V 2. Operating temperature range: -40 degrees C to +90 degrees C 3. Support for Sniffer, Station, softAP, and Wi-Fi Direct modes 4. Data rates: 150 Mbps at 11n HT40, 72 Mbps at 11n HT20, 54 Mbps at 11g, 11 Mbps at 11b 5. Transmit power: 19.5 dBm at 11b, 16.5 dBm at 11g, 15.5 dBm at 11n 6. Receiver sensitivity up to -98 dBm 7. UDP sustained throughput of 135 Mbps Includes: 1. WIFI Bluetooth Module x 1 2. Pins x 2 3. Cable x 1 4. Antenna x 1

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.