Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
TTGO T-SIM7000G ESP32 WiFi Bluetooth 18560 Battery Holder Solar Charge Module Development Board — image 1
Hover to zoom

1 / 7 · Click to enlarge

TTGO T-SIM7000G ESP32 WiFi Bluetooth 18560 Battery Holder Solar Charge Module Development Board

5.01 rating
Phone Model
T-SIM7000G
T-SIM7600E-H
AI Summary
Battery Protection Module for premium buyers

The TTGO T-SIM7000G ESP32 WiFi Bluetooth 18560 Battery Holder Solar Charge Module Development Board is a premium battery protection module designed for premium buyers. It features One Package Weight: 0.08kgs / 0.17lb and One Package Size: 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch. Customers praise its excellent build quality.

excellent build qualitywireless convenience
₹6,741
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹6,741
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.08kgs / 0.17lb
One Package Size: 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch
Best Sellers Rank (Consumer Electronics): #5717
Best Sellers Rank (Consumer Electronics > DIY Parts & Components ): #164
Best Sellers Rank (Consumer Electronics > DIY Parts & Components > Module): #41

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-DIY6151Category: Battery Protection Module

About This Product

The TTGO T-SIM7000G ESP32 WiFi Bluetooth 18560 Battery Holder Solar Charge Module Development Board is a premium battery protection module designed for premium buyers. Customers highlight its excellent build quality.

Key Specifications

  • One Package Weight: 0.08kgs / 0.17lb
  • One Package Size: 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch
  • Best Sellers Rank (Consumer Electronics): #5717
  • Best Sellers Rank (Consumer Electronics > DIY Parts & Components ): #164
  • Best Sellers Rank (Consumer Electronics > DIY Parts & Components > Module): #41

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Product Description Hardware Specifications: 1. Main chip: ESP32 2. Module: ESP32-WROVER-B,SIM7000G 3. Interface:USB,SD Card,Solar Input interface 4. Flash Memory: 4M Flash / 8M PSRAM 5. Button: Reset,Power switch 6. USB to TTL: CP2104 7. Car Clock: 40MHz 8. SIM Card Size: Nano SIM Card 9. SIM Antenna 10. GPS Antenna 11. Operating Temperature Range: -40-85 degrees 12. Product Size: 111mm x 37mm x 20mm 13. Product Weight: 50g Power Specifications: 1. Working Voltage: 5V input 2. Solar input voltage range???4.4-6V 3. Working Curent: About 200mA 4. Charging Current: 780mA 5. Battery Model: 18650 6. Battery Holder Model: 18650 battery holder 7. JST Connector: 2pin 2mm 8. USB: TYPE-C 3.0 Wi-Fi: 1. Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n(802.11n???speed up to150Mbps)A-MPDU and A-MSDU polymerization???support 0.4??S Protection interval 3. Frequency: range 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth: 1. Protocol meet Bluetooth : v4.2BR/EDR and BLE standard 2. Radio Frequency : with -97dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio Frequency : CVSD&SBC audio frequency Software Specification: 1. Wi-Fi Mode : Station/SoftAP/SoftAP+Station/P2P 2. Security Mechanism : WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type : AES/RSA/ECC/SHA 4. Firmware Upgrade :UART download/OTA???Through network/host to download and write firmware??? 5. Software Development : Support cloud server development /SDK for user firmware development 6. Networking Protocol : IPV4, IPV6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User Configuration : AT + Instruction set, cloud server, Android/iOS APP 8. OS : FreeRTOS Version update function: 1. The batterys positive and negative poles are connected to the wrong protection, overcharge and over discharge protection 2. GPS power control, reduce power consumption, the lowest reaches 300uA when sleeping 3. Replacement of ordinary charging IC with solar charging IC

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.