
1 / 3 · Click to enlarge
AI Summary
A 340 x 300 mm vacuum-sealing bag with a manual suction pump for storing a single 3D printer filament spool. The one-way valve and pump let you draw out air to help keep moisture away between prints.
Key Highlights
- Vacuum bag and manual suction pump in one set
- 340 x 300 mm size suits a single filament spool
- Polyamide polyethylene film resists humidity
- Transparent bag shows filament type and colour
- Reusable design for ongoing spool storage
- Lightweight set at just 72 g
Ideal For
- Hobbyist 3D printer owners storing open spools
- Small workshops keeping spare filament tidy
- Makers in humid climates protecting filament between prints
- Users who want a manual, no-power storage solution
- Anyone organising a single spool shelf or drawer
Buying Tip
Measure your spool's diameter and width before ordering, since the bag is sized at 340 x 300 mm and is intended for one spool.
Elecvora expert review
Our verdict
A sensible low-cost accessory for anyone who leaves filament sitting on a printer for days. The manual pump keeps it simple, though one bag means you can only protect a single spool at a time.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes both bag and pump
- Transparent film makes contents easy to identify
- No power or batteries required
- Reusable for repeated spool storage
- Compact and lightweight at 72 g
Cons
- Only one bag is included
- Manual pumping takes a little effort
- Bag size limits you to spools that fit 340 x 300 mm
Best for
Single-spool filament storage between prints
Not ideal for
Users needing to store many spools at once
Specifications
| Item Type | Vaccum Bag Set |
|---|---|
| Material | Polyamide Polyethylene |
| Color | White, Transparent |
| Length (mm) | 340 |
| Width (mm) | 300 |
| Compatibility | General Purpose |
| Weight (g) | 72 |
| Size (mm) | 340x300 |
| Shipping Weight | 0.09 kg |
| Shipping Dimensions | 34 × 25 × 5 cm |
What's in the box
- 1 x vacuum bag
- 1 x suction pump
Frequently Asked Questions
What is included in this set?
Does it need electricity or batteries?
Will it fit my filament spool?
Is the bag reusable?
Can I see the filament through the bag?
How should I store the sealed bag?
Overview
The Two Trees Vacuum Bag + Suction Pump Set is a compact storage solution for one 3D printer filament spool. Filament left in open air can absorb moisture, and damp filament often prints poorly. This set gives you a straightforward way to seal a spool inside a bag and remove the air with the supplied pump, creating a tighter, drier storage environment between printing sessions.
The bag is 340 x 300 mm and made from polyamide polyethylene film in a transparent finish. That transparency is practical: you can check which material and colour is inside without breaking the seal. At 72 g for the set, it stores easily on a shelf or in a drawer.
Key Features
- Vacuum sealing with a one-way valve: close the bag, attach the pump and draw air out to reduce the space around the spool.
- Humidity-resistant film: the polyamide polyethylene construction is chosen to limit moisture reaching the filament.
- Transparent bag: identify filament at a glance and spot any visible signs of moisture.
- Reusable format: open the bag, swap spools and reseal as your printing needs change.
- General-purpose compatibility: designed as a general storage bag rather than for one specific printer or filament brand.
Specifications Explained
340 x 300 mm size: this footprint is intended for a single standard filament spool. Check your spool diameter and width before ordering, especially for oversized reels.
Polyamide polyethylene: a flexible film combination used for barrier storage bags. It keeps the bag light and pliable while providing a barrier against ambient humidity.
72 g set weight: the bag and pump together are light, so the set is easy to move and store. Shipping weight is listed at 0.09 kg.
White and transparent colourway: the transparent body lets you see the contents, while the white elements complete the look of the set.
Compatibility and Requirements
The set is listed as general purpose, so it is not tied to a particular printer model. It is intended for storing 3D printer filament spools that fit within the 340 x 300 mm bag. No power supply is needed: the suction pump is operated by hand.
Typical Uses
- Storing an open spool between print jobs
- Keeping a spare spool sealed until needed
- Organising filament in a humid room or workshop
- Protecting specialty filament from everyday air exposure
What's in the Box
The set contains one vacuum bag and one suction pump.

Quick specs
- Item Type
- Vaccum Bag Set
- Material
- Polyamide Polyethylene
- Color
- White, Transparent
- Length (mm)
- 340
- Width (mm)
- 300
- Compatibility
- General Purpose













