
1 / 4 · Click to enlarge
AI Summary
A 20 mm OD, 25 mm long aluminum flexible coupling with 5 mm and 10 mm bores that absorbs vibration and misalignment. Its clamp hubs and elastomer spider deliver zero-backlash torque transfer for small shaft connections.
Key Highlights
- Connects 5 mm and 10 mm shafts with zero backlash
- Aluminum jaw hubs with elastomer spider for vibration damping
- Compact 20 mm outer diameter and 25 mm length
- Clamp-style hubs grip shafts without damage
- Low moment of inertia for constant velocity
- Lightweight at just 16 g
Ideal For
- 3D printer builders connecting stepper motors to lead screws
- Makers upgrading small CNC machines with mismatched shaft sizes
- Robotics hobbyists needing vibration isolation
- DIY automation projects with 5 mm and 10 mm shafts
- Maintenance replacements for worn flexible couplings
Buying Tip
Verify both shaft diameters and the available space for a 20 mm OD, 25 mm long coupling before ordering.
Elecvora expert review
Our verdict
A practical, lightweight coupling for small shaft connections where vibration damping and zero backlash are needed. It installs easily and suits compact 3D printer and CNC builds, though the elastomer requires protection from heat and UV.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Zero backlash for accurate motion
- Clamp hubs avoid shaft damage
- Lightweight and compact
- Easy to install and remove
Cons
- Elastomer degrades with heat and UV exposure
- Limited to 5 mm and 10 mm shaft sizes
Best for
3D printer and small CNC builds with 5 mm and 10 mm shafts
Not ideal for
High-temperature or UV-exposed environments
Specifications
| Item Type | Flexible Shaft Coupling |
|---|---|
| Material | Aluminium |
| Bore Diameter [B] (mm) | 5 x 10 |
| Bore Diameter [d1] (mm) | 5 |
| Bore Diameter [d2] (mm) | 10 |
| Outer Diameter (mm) | 20 |
| Length (mm) | 25 |
| Weight (g) | 16 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 3 × 3 × 2 cm |
What's in the box
- 1 x Two Trees Aluminum OD:20mm L:25mm Flexible Spider Shaft Coupling Bore: 5x10mm
Frequently Asked Questions
What shaft sizes does this coupling fit?
Does it come with screws?
Can I use it in a high-temperature environment?
Is it suitable for 3D printers?
How tight should the clamp screws be?
What is the maximum torque?
Overview
The Two Trees Aluminum Flexible Spider Shaft Coupling is a compact mechanical component for linking a 5 mm shaft to a 10 mm shaft. Its two machined aluminum jaw hubs are separated by an elastomer spider, which cushions shock loads and helps reduce the effects of angular and axial misalignment. With a 20 mm outer diameter and 25 mm overall length, it suits tight spaces in 3D printers, small CNC machines, and other motor-driven assemblies.
Key Features
- Vibration damping: The elastomer spider absorbs vibration and shock between the connected shafts.
- Zero backlash: The coupling design minimizes play for accurate torque transmission.
- Clamp hubs: Screws tighten the hubs onto the shafts without the deep marks left by set screws.
- Lightweight: At only 16 g, the coupling adds minimal rotating mass.
- Simple installation: The two-piece design allows easy connection and disconnection.
Specifications Explained
Bore sizes (5 mm and 10 mm): One hub accepts a 5 mm shaft and the other accepts a 10 mm shaft, making this a step coupling for mismatched shaft diameters.
Outer diameter (20 mm) and length (25 mm): These dimensions determine the space required around the shaft connection. Check that your setup has clearance for a 20 mm diameter and 25 mm length.
Material (aluminum): The aluminum hubs offer corrosion resistance and durability while keeping weight low.
Elastomer spider: The flexible insert provides shock absorption and misalignment compensation, but it will degrade over time, especially when exposed to high temperatures or UV light.
Compatibility and Requirements
This coupling is intended for shafts measuring 5 mm and 10 mm in diameter. It does not include shaft keys or additional fasteners beyond those supplied with the coupling. Ensure your shafts are clean, free of burrs, and within the specified diameters for a proper fit. The clamp screws should be tightened securely but not excessively to avoid damaging the shafts or stripping threads.
Typical Uses
Use this coupling in 3D printers to connect a stepper motor to a lead screw or drive shaft, in small CNC builds, or in other compact mechanisms where a 5 mm shaft drives a 10 mm shaft. It is also suitable for applications that benefit from vibration isolation and slight misalignment tolerance, such as small robotics and automation projects.
What's in the Box
1 x Two Trees Aluminum OD:20mm L:25mm Flexible Spider Shaft Coupling Bore: 5x10mm.
Quick specs
- Item Type
- Flexible Shaft Coupling
- Material
- Aluminium
- Bore Diameter [B] (mm)
- 5 x 10
- Bore Diameter [d1] (mm)
- 5
- Bore Diameter [d2] (mm)
- 10
- Outer Diameter (mm)
- 20













