
1 / 4 · Click to enlarge
AI Summary
A lightweight aluminum spider coupling that connects a 5mm shaft to an 8mm shaft, damping vibration and absorbing small misalignment. The 20mm diameter and 25mm length keep it compact for tight builds.
Key Highlights
- Machined aluminum jaw hubs with an elastomer spider insert
- Connects a 5mm shaft to an 8mm shaft in one coupling
- 20mm outer diameter and 25mm overall length
- Clamping hubs grip shafts without set-screw damage
- Elastomer spider damps vibration and absorbs shock
- Weighs just 18 grams for low rotating mass
Ideal For
- 3D printer builders joining a motor to a lead screw
- Small CNC and automation projects with mixed shaft sizes
- Robotics hobbyists needing a compact flexible link
- Makers replacing a worn or mismatched shaft coupling
Buying Tip
Measure both shaft ends with calipers before ordering, because the 5mm and 8mm bores must match your shafts for the clamp to grip properly.
Elecvora expert review
Our verdict
A tidy, low-cost solution for connecting a 5mm shaft to an 8mm shaft where some misalignment and vibration are expected. It is light and simple to service, though the elastomer spider is a wear part that limits harsh environments.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Handles two different bore sizes in one part
- Clamping hubs avoid set-screw marks on shafts
- Elastomer spider damps vibration and shock
- Very light at 18 grams
- Easy to separate for maintenance
Cons
- Elastomer spider degrades with heat and UV exposure
- Not intended for heavy torque loads
- Clamp screws must be tightened carefully
Best for
Light-duty drives with a 5mm and an 8mm shaft that need vibration damping
Not ideal for
High-temperature, UV-exposed or high-torque applications
Specifications
| Item Type | Flexible Shaft Coupling |
|---|---|
| Material | Aluminium |
| Bore Diameter [B] (mm) | 5 x 8 |
| Bore Diameter [d1] (mm) | 5 |
| Bore Diameter [d2] (mm) | 8 |
| Outer Diameter (mm) | 20 |
| Length (mm) | 25 |
| Weight (g) | 18 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 3 × 3 × 2 cm |
What's in the box
- 1 x Two Trees Aluminum Flexible Spider Shaft Coupling, OD 20mm, Length 25mm, Bore 5x8mm
Frequently Asked Questions
What shaft sizes does this coupling fit?
How large is the coupling?
Does it need lubrication or power?
Can it handle misalignment?
What is included in the package?
Where should I avoid using it?
Overview
The Two Trees flexible spider shaft coupling is a compact mechanical link for joining two shafts of different diameters. One hub is bored to 5mm and the other to 8mm, so a single part bridges a common mismatch without extra adapters. Both hubs are machined from aluminum and meet through an elastomer spider that sits between the jaws.
With a 20mm outer diameter, a 25mm length and a weight of 18 grams, the coupling fits into small assemblies where space and rotating mass are limited. It transmits torque while softening the shock loads and vibration that pass between the driving and driven shafts.
Key Features
- Dual bore sizes: 5mm on one side and 8mm on the other, ready for mixed shaft diameters.
- Elastomer spider: the insert between the jaws absorbs shock and damps vibration.
- Clamping hubs: screws tighten the hub around the shaft, so the shaft surface is not marked by a set screw.
- Simple servicing: the two halves separate easily for inspection or spider replacement.
- Light build: at 18 grams, it adds little inertia to a small drive train.
Specifications Explained
Bore diameters
The 5mm and 8mm bores define which shafts the coupling accepts. Check both shaft ends with calipers before ordering, since the fit is what carries the torque.
Outer diameter and length
At 20mm across and 25mm long, the coupling needs clearance around the shaft line for rotation and for access to the clamp screws.
Material and weight
Aluminum keeps the part rigid and corrosion resistant while holding weight to 18 grams. The elastomer spider is the wear item and sets the coupling's temperature and UV limits.
Compatibility and Requirements
The coupling is intended for a 5mm shaft on one side and an 8mm shaft on the other. Shaft ends should be clean, free of burrs and cut to the correct length so the hub grips the full bore. The clamp screws must be tightened firmly but not excessively to avoid crushing a hollow or soft shaft. Because the spider is an elastomer, avoid prolonged exposure to high temperatures and UV light, which shorten its service life.
Typical Uses
Common applications include 3D printer motion systems, small CNC builds, robotics joints, and other light-duty drives that need a forgiving connection between a motor and a lead screw or shaft. The coupling also helps where minor angular or axial misalignment cannot be fully eliminated during assembly.
What's in the Box
One Two Trees aluminum flexible spider shaft coupling with 5mm and 8mm bores, 20mm outer diameter and 25mm length.
Quick specs
- Item Type
- Flexible Shaft Coupling
- Material
- Aluminium
- Bore Diameter [B] (mm)
- 5 x 8
- Bore Diameter [d1] (mm)
- 5
- Bore Diameter [d2] (mm)
- 8
- Outer Diameter (mm)
- 20













