Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A stainless steel V6 J-head cooling tower for Bowden extruders running 1.75 mm filament. Its M10 top thread, V6 heat break mount and 30 mm fan shroud space help keep filament cool before it reaches the hotend.

Key Highlights

  • Stainless steel heatsink for Bowden V6 J-head hotend assemblies
  • M10 top thread connects to a standard Bowden connector
  • Machined bottom thread mounts directly to a V6 heat break
  • 3.2 mm feed path sized for 1.75 mm filament
  • Middle section accepts a 30 mm fan shroud for active cooling
  • Lightweight at about 40 g, silver finish

Ideal For

  • Makers servicing a Bowden V6 hotend on a Prusa i3-style printer
  • Creality CR-10 owners replacing a worn cooling tower
  • Builders assembling a new 1.75 mm Bowden extrusion setup
  • Workshops keeping spare cold-end parts for multiple printers
  • Hobbyists upgrading or repairing a V6 hotend assembly

Buying Tip

Check that your hotend uses a V6 heat break and that you already have a 30 mm fan and shroud, since neither is included with this heatsink.

Elecvora expert review

Our verdict

A simple, well-focused cold-end part that does one job: keeping 1.75 mm filament cool on a Bowden V6 setup. It is a sensible spare or build component for standard V6 hardware, provided you already own the fan and shroud.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Stainless steel construction with a clean silver finish
  • Standard M10 top thread and V6 heat break mounting
  • Sized feed path for 1.75 mm filament
  • Lightweight at about 40 g
  • Accepts a common 30 mm fan shroud

Cons

  • Fan and shroud are not included
  • Only suits Bowden V6-style assemblies, not direct drive
  • No mounting hardware listed in the package

Best for

Bowden V6 hotend repairs and builds with 1.75 mm filament

Not ideal for

Direct drive hotend setups or printers needing a complete hotend kit

Specifications

Item TypeHeatsink
Compatibility1.75mm filament
MaterialStainless Steel
Feed Path Diameter (mm)3.2
Thread Depth (mm)16
Weight (g)40
ColorSilver
Shipping Weight0.043 kg
Shipping Dimensions9 × 5 × 4 cm

What's in the box

  • 1 x Two Trees Bowden V6 J-head Hotend Heatsink for 1.75 mm filament

Frequently Asked Questions

What is this heatsink used for?
It is the cold-end cooling tower for a Bowden V6 J-head hotend assembly. It keeps filament cool before it reaches the heated zone.
Which filament size does it support?
It is specified for 1.75 mm filament, with a 3.2 mm feed path through the heatsink.
Does it include a fan?
No. A 30 mm fan and shroud are required for active cooling but are not part of the package.
How does it connect to the printer?
The M10 top thread takes a standard Bowden connector, and the machined bottom thread fits directly onto a V6 heat break.
What is in the package?
The package contains one Two Trees Bowden V6 J-head Hotend Heatsink for 1.75 mm filament.
How should the Bowden tube be fitted?
For 1.75 mm systems, insert the Bowden tube all the way down to the heat break inside the cooling tower.

Overview

The Two Trees Bowden V6 J-head Hotend Heatsink is the cold-end component of a Bowden-fed V6 hotend assembly. It is a silver stainless steel cooling tower that sits above the heat break and below the Bowden connector. Its role is to manage heat in the filament path so that material stays rigid until it enters the heated zone, which is the basis of reliable extrusion and clean retraction.

This part is aimed at builders and repairers working with 1.75 mm filament on Bowden-style printers. It is a practical spare for anyone servicing a V6 hotend or assembling a new cold end.

Key Features

  • Stainless steel body: a durable metal radiator with fins for heat dissipation.
  • M10 top thread: accepts a standard Bowden connector for the PTFE tube entry.
  • V6 heat break mounting: the machined lower thread fits directly onto a V6 heat break.
  • 30 mm fan shroud space: the middle section is reserved for a 30 mm fan shroud that blows air across the radiator.
  • 1.75 mm feed path: a 3.2 mm internal path suits 1.75 mm filament setups.
  • Lightweight: approximately 40 g, so it adds little mass to the carriage.

Specifications Explained

The 3.2 mm feed path is the internal channel through the heatsink. It is sized for 1.75 mm filament and leaves clearance for the Bowden tube and smooth feeding. The 16 mm thread depth describes the threaded section that engages the heat break and connector, giving a secure, seated fit. The M10 top thread is a common standard for Bowden connectors, so existing fittings can be reused. The 30 mm fan shroud clearance matters because active airflow over the fins is what keeps the cold end cold; without it, heat can creep upward. At about 40 g, the part is light enough for moving Bowden setups.

Compatibility and Requirements

This heatsink is intended for Bowden-style extruders and V6 hotend assemblies using 1.75 mm filament. It mounts to a V6 heat break and takes a standard Bowden connector at the top. A 30 mm fan and shroud are required for active cooling but are not included. For 1.75 mm systems, the Bowden tube should be inserted down to the heat break inside the cooling tower for correct feeding.

Typical Uses

Use it when replacing a worn or damaged cooling tower, when building a new Bowden V6 hotend, or when servicing a printer that uses this style of cold end. It suits Prusa i3-style machines and Creality CR-10-class printers that use Bowden extrusion, and it can also serve as a spare part for a workshop that maintains several printers.

What's in the Box

1 x Two Trees Bowden V6 J-head Hotend Heatsink for 1.75 mm filament.

Quick specs

Item Type
Heatsink
Compatibility
1.75mm filament
Material
Stainless Steel
Feed Path Diameter (mm)
3.2
Thread Depth (mm)
16
Weight (g)
40
See all specifications