Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 40x20mm 12V axial fan with five blades, 0.1A current draw and a 300mm XH2.54-2P cable. Its oil-containing bearing resists dust and supports longer service life in tight electronic enclosures.

Key Highlights

  • 40x40x20mm compact frame fits tight enclosures and brackets
  • 12VDC rated, 0.1A current draw for low-power cooling
  • Five-blade impeller with 30dB noise output
  • Oil-containing bearing design for dust resistance and longer life
  • 300mm cable with XH2.54-2P connector for easy wiring
  • Lightweight at 24g with plastic and metal construction

Ideal For

  • 3D printer builders cooling hotends and printed parts
  • Makers and hobbyists building compact electronic enclosures
  • Repair technicians replacing small 40mm 12V fans
  • DIY enthusiasts needing a low-current 12V axial fan

Buying Tip

Check that your mount uses a 40mm hole spacing and that your power source provides 12VDC at up to 0.1A before ordering.

Elecvora expert review

Our verdict

A practical compact 12V fan with a ready-made connector and an oil-containing bearing aimed at longer life. It suits small cooling jobs where space and current draw are limited.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 40 x 20mm size fits tight spaces
  • Low 0.1A current draw at 12V
  • Pre-attached 300mm XH2.54-2P cable
  • Oil-containing bearing for dust resistance

Cons

  • 30dB noise may be noticeable in very quiet rooms
  • No mounting screws or accessories included
  • Requires a compatible 12V source and XH2.54-2P header

Best for

Small electronics and 3D printer cooling where a 40mm 12V fan is required

Not ideal for

High-static-pressure or large-case cooling needs

Specifications

Item TypeRegular Cooling Fan
Dimensions (L x W x H) mm40x20
Rated Voltage (VDC)12
ColorBlack
MaterialPlastic, Metal
No. of Blades5
Rated Current (A)0.1
Noise (dB)30
Cable Length300
Length (mm)40
Width (mm)40
Weight (g)24
Shipping Weight0.03 kg
Shipping Dimensions9 × 8 × 3 cm

What's in the box

  • 1 x Two Trees Oil-Containing Cooling Fan 4020 12V XH2.54-2P L300mm

Frequently Asked Questions

What voltage does this fan require?
The fan is rated for 12VDC and draws 0.1A. Use a 12V power source that can supply at least this current.
What connector is on the cable?
The 300mm cable terminates in an XH2.54-2P connector, which mates with matching 2-pin headers or adapter leads.
Is this fan suitable for 3D printers?
Yes, its 40 x 40 x 20mm size and 12V rating make it suitable for hotend and part-cooling tasks where a compact fan is specified.
How noisy is the fan?
The rated noise level is 30dB, which is a moderate level suitable for many equipment enclosures.
What is included with the fan?
The package includes one Two Trees Oil-Containing Cooling Fan 4020 12V XH2.54-2P L300mm with its attached cable. Mounting screws are not listed.
How should I maintain the fan?
Keep the blades and surrounding area free of dust buildup and ensure the fan spins freely. The oil-containing bearing is designed to resist dust, but periodic cleaning helps maintain airflow.

Overview

The Two Trees Oil-Containing Cooling Fan 4020 is a small axial fan built for active heat dissipation in electronics. It measures 40 x 40 x 20mm and runs on 12VDC at a rated current of 0.1A, so it draws little power while moving air through cramped spaces. The fan uses a five-blade impeller and an oil-containing bearing system intended to improve dust resistance and extend service life. A 300mm cable with an XH2.54-2P connector is pre-attached, removing the need to crimp a plug before installation. At 30dB, the fan is suited to applications where a modest acoustic profile matters.

Key Features

  • Compact 40mm frame: The 40 x 40 x 20mm size fits small enclosures, hotend assemblies, and control boxes.
  • 12V low-current operation: Rated at 12VDC and 0.1A, it works with common 12V DC supplies.
  • Oil-containing bearing: Designed for better dust resistance and longer life than basic sleeve bearings.
  • Five-blade impeller: Provides focused airflow for local cooling tasks.
  • Ready-to-connect cable: The 300mm lead ends in an XH2.54-2P connector for quick hookup.
  • Lightweight build: At 24g, it adds minimal mass to mounts and brackets.

Specifications Explained

Size and airflow: The 40 x 40 x 20mm frame is a standard compact fan footprint, useful where larger 80mm or 120mm fans will not fit. The 20mm depth gives the impeller room to move air without requiring a thick mounting space.

Voltage and current: A 12VDC rating with 0.1A current draw means the fan consumes about 1.2W, so it can be powered from a 12V rail, adapter, or dedicated fan header that supports the current.

Noise: The 30dB rating indicates a moderate sound level, appropriate for equipment rooms, printer enclosures, and cases where near-silent operation is not mandatory.

Bearing and life: The oil-containing bearing is the key durability feature, aimed at resisting dust ingress and supporting longer operation between replacements.

Cable and connector: The 300mm cable provides reach inside small builds, and the XH2.54-2P plug matches common 2-pin fan headers and adapter leads.

Compatibility and Requirements

This fan requires a 12VDC power source and a matching XH2.54-2P header or adapter. Confirm that your board, controller, or power supply can deliver 0.1A at 12V. The 40mm mounting footprint must match your bracket or enclosure holes. No additional accessories are included beyond the fan and its attached cable.

Typical Uses

  • Cooling 3D printer hotends and small printed parts
  • Ventilating compact computer cases and mini PCs
  • Active cooling inside control cabinets and instrument enclosures
  • General electronics projects needing a small 12V fan

What's in the Box

1 x Two Trees Oil-Containing Cooling Fan 4020 12V XH2.54-2P L300mm.

Quick specs

Item Type
Regular Cooling Fan
Dimensions (L x W x H) mm
40x20
Rated Voltage (VDC)
12
Color
Black
Material
Plastic, Metal
No. of Blades
5
See all specifications