Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 40x20mm 12V turbofan delivers 7000 RPM of focused airflow with an oil-filled bearing for low noise and long life. The pre-wired XH2.54-2P connector and 300mm cable simplify installation in tight spaces.

Key Highlights

  • 40x20mm compact turbofan with 7000 RPM for focused cooling
  • Oil-filled bearing design for low noise and extended lifespan
  • Pre-wired 300mm cable with XH2.54-2P connector
  • Operates on 12V DC within 10°C to 60°C
  • 3mm mounting holes for secure installation
  • Ideal for 3D printer hot ends and small heat sinks

Ideal For

  • 3D printer owners upgrading hot end cooling
  • Electronics hobbyists cooling small heat sinks
  • Makers building compact 12V projects
  • Repair technicians replacing noisy fans
  • DIY enthusiasts needing directed airflow

Buying Tip

Check that your board or power source has an XH2.54-2P header and can supply 12V; this fan is not PWM-controlled, so plan for external speed control if needed.

Elecvora expert review

Our verdict

A reliable, compact 12V turbofan that offers strong airflow and low noise thanks to its oil-filled bearing. It is a solid choice for 3D printer hot end cooling and small electronics projects, though the lack of PWM control limits speed adjustment.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 7000 RPM for its size
  • Oil-filled bearing reduces noise and extends life
  • Pre-wired with XH2.54-2P connector for easy installation
  • Compact 40x20mm footprint fits tight spaces

Cons

  • No PWM speed control; runs at full speed
  • Not waterproof; limited to dry environments
  • Current draw not specified, so verify power supply capacity

Best for

3D printer hot end cooling and small heat sink applications

Not ideal for

High-power electronics requiring variable speed or harsh environments

Specifications

Item TypeHydraulic Cooling Fan
Dimensions (L x W x H) mm40x20
Rated Voltage (VDC)12
Rated Speed (RPM)7000
ColorBlack
MaterialPlastic, Metal
Cable Length300
RPM Tolerance±10%
Operating Temperature (°C)10° to 60° C
Mounting Hole Diameter (mm)3
Air inlet size26mm
Outlet size25 x 15   mm
Shipping Weight0.016 kg
Shipping Dimensions11 × 8 × 2 cm

What's in the box

  • 1 x Two Trees Oil-Filled Turbofan 4020 12V fan with 300mm cable and XH2.54-2P connector

Frequently Asked Questions

What is the connector type on this fan?
It uses an XH2.54-2P connector, a 2-pin latching connector common in electronics. Ensure your board or power source has a matching socket.
Can I control the fan speed?
No, this is a 2-pin fan without PWM control. It runs at full speed when powered. For speed control, you would need an external voltage regulator or PWM controller.
Is this fan suitable for 3D printer hot ends?
Yes, its compact size and directed airflow make it well-suited for cooling hot ends and heat breaks. However, check that your printer provides 12V and has the correct connector.
What is included in the package?
The package includes one fan with a pre-attached 300mm cable and XH2.54-2P connector. No screws or other accessories are included.
How do I maintain the fan?
Keep the fan clean and free of dust. Avoid operating outside the 10°C to 60°C range. The oil-filled bearing is sealed and does not require lubrication.
What are the mounting hole dimensions?
The mounting holes are 3mm in diameter, suitable for M3 screws. The hole spacing is not specified, but standard 40mm fans typically have 32mm spacing.

Overview

The Two Trees Oil-Filled Turbofan 4020 is a 12V DC cooling fan engineered for applications where space is limited but airflow demand is high. Its 40x20mm frame houses a 7000 RPM motor that drives a turbofan blade design, producing a concentrated stream of air to cool heat sinks, hot ends, and electronic components. The oil-filled bearing system reduces friction and noise, contributing to a longer operational life compared to standard sleeve bearings. With a 300mm cable terminated in an XH2.54-2P connector, this fan is ready to plug into compatible 12V headers or power sources, making it a convenient choice for upgrades and repairs.

Key Features

  • Oil-filled bearing for quiet operation and durability
  • 7000 RPM turbofan delivers high static pressure in a small footprint
  • 12V DC operation with XH2.54-2P connector for easy wiring
  • 300mm cable provides flexibility during installation
  • Compact 40x20mm size fits tight enclosures and cooling ducts
  • Wide operating temperature range of 10°C to 60°C

Specifications Explained

The 40x20mm dimensions refer to the fan's 40mm width and 20mm thickness, a common size for small-scale cooling. The 12V rated voltage means it works with standard DC power supplies and 3D printer boards. At 7000 RPM (with ±10% tolerance), the fan moves air quickly, which is useful for pushing air through restrictive paths like heat sink fins. The oil-filled bearing is a type of fluid bearing that reduces metal-to-metal contact, lowering noise and extending life. The 300mm cable gives you enough length to route to a controller without extension. The XH2.54-2P connector is a 2-pin latching connector that ensures a secure connection. Mounting holes are 3mm in diameter, suitable for M3 screws. The air inlet measures 26mm, and the outlet is 25x15mm, indicating a directed airflow pattern.

Compatibility and Requirements

This fan requires a 12V DC power source and a matching XH2.54-2P receptacle or header. It is not a PWM fan, so speed control must be done externally if needed. The 2-pin connector provides power and ground only. Ensure your system can supply the necessary current (not specified, but typical for this size). The fan is not waterproof and should be operated within the 10°C to 60°C range. Mounting requires M3 screws or similar fasteners through the 3mm holes.

Typical Uses

This turbofan is well-suited for cooling 3D printer hot ends and heat breaks, where directed airflow is critical. It can also be used in small electronics enclosures, DIY projects, and repair tasks where a compact 12V fan is needed. The high RPM makes it effective for cooling heat sinks on voltage regulators, motor drivers, and other components that generate concentrated heat.

What's in the Box

Package includes one Two Trees Oil-Filled Turbofan 4020 12V fan with pre-attached 300mm cable and XH2.54-2P connector.

Quick specs

Item Type
Hydraulic Cooling Fan
Dimensions (L x W x H) mm
40x20
Rated Voltage (VDC)
12
Rated Speed (RPM)
7000
Color
Black
Material
Plastic, Metal
See all specifications