Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A nickel-plated brass PC4-M6 pneumatic push-in connector that links 1.75mm filament Bowden tubing to 3mm J-Head hotend fittings. Its elliptical John Guest release grips PTFE tubing securely for consistent filament feeding.

Key Highlights

  • PC4-M6 push-in fitting for Bowden extruder assemblies
  • Compatible with 1.75mm filament and 3mm J-Head fittings
  • Nickel-plated brass body resists corrosion
  • 4mm inner diameter suits standard up to 3mm ID PTFE tubing
  • Elliptical John Guest release for secure tubing grip
  • Lightweight at only 5g with M6 thread

Ideal For

  • 3D printer owners maintaining Bowden extruder assemblies
  • Makers building custom 1.75mm filament 3D printers
  • Users replacing worn or leaking pneumatic fittings
  • Hobbyists upgrading to secure John Guest style connectors

Buying Tip

Check that your hotend or extruder has an M6 threaded port and that your PTFE tubing has an inner diameter of 3mm or less before ordering.

Elecvora expert review

Our verdict

A dependable, low-cost fitting that does exactly what it should: hold Bowden tubing securely in 1.75mm filament setups. Its nickel-plated brass construction and John Guest release make it a smart replacement or upgrade part.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Secure tubing grip thanks to elliptical John Guest release
  • Corrosion-resistant nickel-plated brass body
  • Standard M6 thread fits common extruder and hotend ports
  • Very lightweight at 5g
  • Easy push-in installation and release

Cons

  • Only compatible with 1.75mm filament and 3mm J-Head fittings
  • Requires PTFE tubing with up to 3mm inner diameter
  • Sold as a single unit, so multiple fittings need separate purchases

Best for

Bowden extruder users needing a reliable replacement connector

Not ideal for

Direct-drive extruder setups without M6 threading

Specifications

Item TypeExtruder
Compatibility1.75mm filament, 3mm J-Head fitting
MaterialNickel Plated Brass
Inner Diameter (mm)4
Thread SizeM6
Release MethodElliptical John Guest Fitting
Weight (g)5
ColorGolden
Shipping Weight0.008 kg
Shipping Dimensions2 × 2 × 1 cm

What's in the box

  • 1 x Two Trees PC4-M6 Pneumatic Push-In Bowden Extruder for 3mm J-Head fitting

Frequently Asked Questions

What filament size does this connector support?
It is designed for 1.75mm filament and works with PTFE tubing that has an inner diameter up to 3mm.
Will it fit my 3D printer's hotend?
It fits any hotend or extruder with an M6 threaded port and a 3mm J-Head fitting. Check your printer's specifications to confirm the thread size.
How do I release the tubing?
Press the elliptical John Guest release ring evenly and pull the PTFE tubing out. The fitting is reusable.
Is any power or voltage required?
No, this is a passive mechanical connector with no electrical components.
What is included in the package?
The package contains one PC4-M6 pneumatic push-in Bowden extruder fitting.
How should I maintain this fitting?
Keep it clean and free of dust or filament debris. Inspect the collet periodically for wear and replace the fitting if the tubing no longer grips securely.

Overview

The Two Trees PC4-M6 Pneumatic Push-In Bowden Extruder is a small but important connector for Bowden-style 3D printer setups. It attaches to an M6-threaded J-Head fitting and accepts standard PTFE tubing with an inner diameter up to 3mm, creating a clean path for 1.75mm filament to travel from the extruder to the hotend. The fitting uses an elliptical John Guest release mechanism that tightens under tension to hold the tubing firmly in place.

Constructed from nickel-plated brass, this connector offers good resistance to corrosion and wear. Its 4mm inner diameter and push-in design make installation straightforward, while the compact 5g weight adds virtually no load to your printer's motion system. Whether you are replacing a worn connector or building a new Bowden extruder assembly, this fitting provides a practical solution for secure filament guidance.

Key Features

  • Pneumatic push-in design: Allows quick insertion and release of PTFE tubing without tools.
  • M6 thread: Fits standard M6 extruder and hotend fittings.
  • Nickel-plated brass: Durable and corrosion-resistant for long service life.
  • Elliptical John Guest release: Grips tubing securely under tension to prevent slipping.
  • 4mm inner diameter: Compatible with common up to 3mm ID PTFE tubing used in 1.75mm filament systems.
  • Lightweight: At only 5g, it won't affect print head movement.

Specifications Explained

Compatibility: This connector is designed for 1.75mm filament and 3mm J-Head fittings. The M6 thread is a common standard for extruder and hotend connections, making it widely adaptable. The 4mm inner diameter matches PTFE tubing with an outer diameter that fits the push-in collet and an inner diameter up to 3mm, which is typical for 1.75mm filament guides.

Material and build: Nickel-plated brass provides a balance of strength and corrosion resistance, ensuring the fitting withstands repeated tubing changes and the heat of a printer enclosure. The elliptical John Guest release mechanism is a proven design for secure tubing retention.

Physical size: With a shipping weight of just 8g and dimensions of 2 × 2 × 1 cm, this is a compact component that is easy to store and install.

Compatibility and Requirements

This extruder fitting is compatible with 1.75mm filament and 3mm J-Head fittings. It requires PTFE tubing with an inner diameter up to 3mm and an M6 threaded port on your extruder or hotend assembly. No additional tools are needed for tubing installation beyond the push-in mechanism.

Typical Uses

Use this connector to replace a worn or leaking Bowden fitting, to build a new extruder assembly, or to upgrade an existing setup for more reliable filament feeding. It is suitable for any Bowden-style 3D printer that uses 1.75mm filament and M6-threaded J-Head fittings.

What's in the Box

Package includes: 1 x Two Trees PC4-M6 Pneumatic Push-In Bowden Extruder for 3mm J-Head fitting.

Quick specs

Item Type
Extruder
Compatibility
1.75mm filament, 3mm J-Head fitting
Material
Nickel Plated Brass
Inner Diameter (mm)
4
Thread Size
M6
Release Method
Elliptical John Guest Fitting
See all specifications