Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type UBEC; input 6V-36V (2-8 cells lithium battery pack) Weight 36g; burst current (a) (Output) 15 mps. Check that your power source supplies 5.2V, 6.0V, 7.4V, 8.4V Optional before connecting it.

Key Highlights

  • Item Type: UBEC
  • Input: 6V-36V (2-8 cells lithium battery pack) Weight 36g
  • Burst Current (A): (Output) 15 mps

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Match the battery chemistry, voltage and connector to your device, and charge it only with a charger made for that chemistry.

Specifications

Item TypeUBEC
Input6V-36V (2-8 cells lithium battery pack) Weight 36g
Max. Operating Current (A)8 Amps
Burst Current (A)(Output) 15 mps
Output Voltage5.2V, 6.0V, 7.4V, 8.4V Optional
Weight (g)36g
Shipping Weight0.037 kg
Shipping Dimensions12 × 10 × 1 cm

Overview

The Ubec-8A 6-36V 2~8S Lipo Esc is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: UBEC
  • Input: 6V-36V (2-8 cells lithium battery pack) Weight 36g (note the battery type so you can order spares or the right charger)
  • Max. Operating Current (A): 8 Amps (your supply must deliver at least this much current)
  • Burst Current (A): (Output) 15 mps (your supply must deliver at least this much current)
  • Output Voltage: 5.2V, 6.0V, 7.4V, 8.4V Optional (match this to your power supply; too high a voltage can damage the part)
  • Weight (g): 36g (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.037 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 12 × 10 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The 8A-UBEC is a switching-mode DC-DC regulator supplied with a 2-3 cells lithium battery pack and it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for nitro powered RC helicopter (bigger than 30 class) and big fixed-wing aircraft. Compared with the linear mode UBEC, the overall efficiency of the switching-mode BEC is much higher, so it can extend the working time of the receiver battery pack, and because a switch mode UBEC can significantly reduce the heat emission, it can avoid the loss of control caused by the over-heat problem which is frequently happened with the linear mode UBEC.

Features:

  1. It adopted the advance DC-DC regulator chip with conversion efficiency exceeds 90%
  2. Applicable for all kinds of recievers/gyros/servos,etc
  3. Dual parallel output can carry larger current
  4. Cables provide larger current to flow into the receiver
  5. The external switch can turn on/off  the UBEC easily.

Package Includes:

1 x Ubec-8A 6-36V 2~8S LIPO ESC

Quick specs

Item Type
UBEC
Input
6V-36V (2-8 cells lithium battery pack) Weight 36g
Max. Operating Current (A)
8 Amps
Burst Current (A)
(Output) 15 mps
Output Voltage
5.2V, 6.0V, 7.4V, 8.4V Optional
Weight (g)
36g
See all specifications