Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual channel UBEC that gives you 8A continuous and 16A peak output, with selectable 5.2V to 8.4V on port A and fixed 12V on port B. Its high-efficiency chip and built-in protection make it a practical power upgrade for RC models and onboard video gear.

Key Highlights

  • Dual channel output: selectable port A and fixed 12V port B
  • 8A continuous and 16A peak current handling
  • Four port A voltage levels: 5.2V, 6.0V, 7.4V, 8.4V
  • High-efficiency DC-DC conversion above 90 percent
  • Over-current, short-circuit and over-temperature protection
  • Compact 51 x 36 mm body with working status indicator

Ideal For

  • RC car builders upgrading or replacing a failed regulator
  • FPV pilots who need a 12V rail for cameras and video transmitters
  • Aircraft modellers running receivers and multiple servos
  • Makers building compact models with mixed voltage needs
  • Hobbyists repairing an existing model with a dual channel UBEC

Buying Tip

Confirm your input supply sits within the 5.2V to 8.4V range and check that each device matches the port and voltage level you plan to use before wiring it in.

Elecvora expert review

Our verdict

A sensible dual channel regulator for builds that need both a selectable control rail and a fixed 12V accessory rail. The current headroom and built-in protection make it a practical replacement part.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two independent outputs in one compact board
  • 8A continuous and 16A peak current handling
  • Four selectable port A voltage levels
  • Over-current, short-circuit and over-temperature protection
  • Light weight at 0.02 kg shipping weight

Cons

  • Input range is limited to 5.2V to 8.4V
  • Installation requires wiring and soldering skills
  • No mounting hardware or accessories listed in the box

Best for

RC and FPV builds needing a selectable control rail plus 12V accessory power

Not ideal for

High-voltage setups outside the 5.2V to 8.4V input range

Specifications

Item TypeElectronic Speed Controller
Peak16Amps
Max Current Continuous (A)8Amps
Max. Operating Current (A)5.2v-8.4v
Length (mm)51
Width (mm)36
Shipping Weight0.02 kg
Shipping Dimensions14 × 10 × 1 cm

What's in the box

  • 1 x Ubec 8A + 4A Dual Channel ESC

Frequently Asked Questions

What is the difference between port A and port B?
Port A has a selectable output of 5.2V, 6.0V, 7.4V or 8.4V. Port B is fixed at 12V for cameras, video transmitters and gimbals.
How much current can it supply?
The regulator is rated at 8A continuous with a 16A peak. Size your loads around the continuous figure.
What input voltage does it need?
The listed input range is 5.2V to 8.4V. Check your supply against this before connecting the unit.
How do I know it is working?
A status indicator lights up when the UBEC is operating normally.
What is included in the package?
The package contains 1 x Ubec 8A + 4A Dual Channel ESC. No other items are listed.
What protection does it offer?
It includes over-current protection, output short-circuit control and over-temperature protection.

Overview

The Ubec 8A + 4A Dual Channel ESC is a compact voltage regulator designed to power receivers, servos, cameras and video gear in RC models. Instead of relying on a single fixed output, it splits power across two channels: port A with a selectable output and port B with a fixed 12V rail. That makes it useful when one model carries both control electronics and video equipment.

The regulator is built around a high-efficiency DC-DC chip with conversion efficiency above 90 percent, so less energy is wasted as heat. It measures 51 mm long and 36 mm wide, and ships at only 0.02 kg, so it adds very little weight or bulk to an airframe or chassis.

Key Features

  • Two output channels: port A is adjustable across four levels; port B is fixed at 12V.
  • Headroom for peaks: 8A continuous and 16A peak current ratings.
  • Selectable port A voltage: choose 5.2V, 6.0V, 7.4V or 8.4V to suit different onboard equipment.
  • Protection built in: over-current protection, output short-circuit control and over-temperature protection.
  • Status indicator: the light is on when the UBEC is working normally.
  • Compact footprint: 51 x 36 mm, easy to place in tight builds.

Specifications Explained

Current ratings

The 8A continuous rating is the load the regulator is designed to supply steadily. The 16A peak figure covers short bursts, such as when several servos move at once. Plan your loads around the continuous number and treat the peak as brief headroom.

Port A voltage selection

Port A can be set to 5.2V, 6.0V, 7.4V or 8.4V. Lower settings suit standard receivers and servos, while higher settings match equipment that expects a higher supply. Check what your device accepts before choosing a level.

Port B fixed 12V

Port B always outputs 12V, which is the common supply for cameras, video transmitters, gimbals and similar accessories. This lets you run control electronics and video gear from one regulator.

Efficiency and protection

Conversion efficiency above 90 percent keeps heat low. Over-current, short-circuit and over-temperature protection add a layer of safety if a load misbehaves.

Compatibility and Requirements

The regulator accepts an input in the 5.2V to 8.4V range as listed in the product data, so confirm your supply falls within that window before connecting. Match each device to the correct port and voltage level. The unit is a replacement part, so basic wiring and soldering skills are expected during installation.

Typical Uses

  • Powering receivers and servos in RC cars and aircraft
  • Supplying 12V cameras and video transmitters from a single board
  • Replacing an old or failed regulator in an existing model
  • Adding a regulated 12V rail to a compact FPV or RC build

What's in the Box

Package includes 1 x Ubec 8A + 4A Dual Channel ESC. No other accessories are listed.

Quick specs

Item Type
Electronic Speed Controller
Peak
16Amps
Max Current Continuous (A)
8Amps
Max. Operating Current (A)
5.2v-8.4v
Length (mm)
51
Width (mm)
36
See all specifications