Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by UBYTE, this multi-parameter environmental sensors is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.005 kg.

Key Highlights

  • Shipping Weight: 0.005 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.005 kg
Shipping Dimensions4 × 3 × 2 cm

Overview

The Ubyte BME690 Temperature, Humidity, Pressure and Gas Sensor Module, made by UBYTE, is listed in our multi-parameter environmental sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 4 × 3 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Ubyte BME690 Temperature, Humidity, Pressure and Gas Sensor Module is a compact environmental sensing module built around the Bosch Sensortec BME690. It measures temperature, relative humidity, barometric pressure and gas/VOC changes, making it well-suited for air-quality monitoring, weather stations, IoT devices, smart home products and embedded sensor development. The module is designed for easy integration with 3.3V and 5V microcontroller platforms through its onboard 3.3V regulator and level-shifting circuitry, while also including ESD protection, a power LED, soldered headers and mounting holes for practical prototyping and installation.

Compatible with Ubyte STM32WB55 Eval Board (https://Elecvora.in/product/ubyte-stm32wb55-evaluation-board/), Ubyte S32K312 SmartWheels Micro EV3 Board (https://Elecvora.in/product/ubyte-s32k312-micro-ev2-nxp-evaluation-board/) and Ubyte S32K144 SmartWheels Micro EV4 Board.


Features:

  1. Based on Bosch Sensortec BME690 sensor
  2. Measures temperature, humidity, pressure and gas/VOC changes
  3. Temperature operating range: -40°C to +85°C
  4. Humidity range: 0–100% RH, typical accuracy ±3% RH
  5. Pressure range: 300–1100 hPa, typical accuracy ±0.5 hPa
  6. Temperature accuracy: ±0.5°C from 0°C to 65°C
  7. Supports air-quality related outputs through Bosch BSEC, including IAQ, bVOC, CO₂-equivalent and gas scan result
  8. I²C interface for simple microcontroller connection
  9. Compatible with 3.3V and 5V MCU systems
  10. .Onboard 3.3V regulator, bidirectional level shifting, ESD protection and power LED
  11. Solder-selectable I²C address. Default I²C address: 0x76, selectable to 0x77
  12. Compact 25 mm × 17 mm board with soldered headers and M3 mounting holes

Other resources and Example codes for Ubyte BME690 Module can be found on the GitHub Repo:

https://github.com/FireracerPranay/Ubyte_BME690_Sensor_Resources.git 


Specifications:

  1. Sensor IC: Bosch BME690
  2. Measured Parameters: Temperature, Humidity, Pressure, Gas (VOC/VSC/CO/H₂)
  3. Temperature Range: -40°C to +85°C
  4. Temperature Accuracy: ±0.5°C (0°C to 65°C)
  5. Humidity Range: 0–100% RH
  6. Humidity Accuracy: ±3% RH
  7. Pressure Range: 300–1100 hPa
  8. Pressure Accuracy: ±0.5 hPa
  9. Gas Outputs: IAQ, bVOC, CO₂-equivalent, gas scan result
  10. Interface: I²C (up to 3.4 MHz), SPI (3/4 wire up to 10 MHz)
  11. I²C Address: 0x76 (default), selectable to 0x77
  12. Supply Voltage (Sensor): 1.71V to 3.6V
  13. Logic Voltage (VDDIO): 3.3V
  14. MCU Compatibility: 3.3V & 5V supported
  15. Current Consumption: 2.2–4.2 µA (basic sensing), up to 3.1 mA (gas scan)
  16. Ultra-Low Power Mode: ~0.05 mA
  17. Sleep Current: ~0.11 µA
  18. Response Time (Humidity): ~1 second
  19. Features: Onboard 3.3V regulator, level shifting, ESD protection, power LED
  20. Mounting: M3 holes, breadboard compatible
  21. Dimensions: 25 mm × 17 x 11 mm
  22. Weight: 3 g

Package Includes:

1 x Ubyte BME690 Temperature, Humidity, Pressure and Gas Sensor Module

Quick specs

Shipping Weight
0.005 kg
Shipping Dimensions
4 × 3 × 2 cm
See all specifications