
1 / 5 · Click to enlarge
AI Summary
A quad-channel USB to UART converter with adjustable 1.8V, 3.3V, and 5V levels plus dedicated ESP32 boot and reset controls. It simplifies multi-device serial debugging and ESP32 programming over a single USB-C connection.
Key Highlights
- Four independent UART channels over one USB Type-C link
- Selectable 1.8V, 3.3V, and 5V logic levels per channel
- Dedicated ESP32 boot and reset buttons on channel B
- Status LEDs for power, UART activity, and ESP32 state
- Includes JST XH cables and USB-C cable for quick setup
Ideal For
- Embedded developers needing multi-port serial debugging
- ESP32 firmware engineers requiring quick boot/reset control
- IoT prototypers connecting sensors at different logic levels
- Industrial technicians monitoring multiple UART devices
- Makers building projects with mixed 1.8V, 3.3V, and 5V components
Buying Tip
Check that your target devices use 1.8V, 3.3V, or 5V logic and that you have the appropriate JST XH or custom cables for your setup.
Elecvora expert review
Our verdict
The UBYTE Quad Channel USB to UART Converter is a well-designed tool for anyone who regularly works with multiple serial devices. Its adjustable voltage levels and dedicated ESP32 controls make it especially handy for mixed-voltage projects and firmware development.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four independent UART channels save desk space and USB ports
- Selectable 1.8V, 3.3V, and 5V logic per channel
- ESP32 boot/reset buttons simplify programming
- Includes useful JST XH cables and USB-C cable
- Clear status LEDs for power and data activity
Cons
- Requires separate wiring for each target device
- No software or drivers included in the box
- Voltage selection method may require referring to board markings
Best for
Developers and engineers needing multi-UART communication and ESP32 programming in one device
Not ideal for
Those who only need a single UART channel or prefer pre-assembled plug-and-play solutions
Specifications
| Voltage Range (V) | 1.8V, 3.3V, 5V |
|---|---|
| Main control (MCU) | ESP32 Auto-Boot Support |
| Power Interface | USB Type-C |
| Indicator | Power, UART, ESP32 Status LEDs |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 17 × 11 × 6 cm |
What's in the box
- 1 x Quad Channel USB to UART Converter Board
- 3 x 4-Pin JST XH Connector with Cable
- 1 x 6-Pin JST XH Connector with Cable
- 1 x USB Type-C Cable
Frequently Asked Questions
Can I use all four UART channels at the same time?
What voltage levels are supported?
Do I need to install drivers?
How do I program an ESP32 with this converter?
What cables are included?
Can I use this with a Raspberry Pi or Arduino?
Overview
The UBYTE Quad Channel USB to UART Converter is a versatile interface board that provides four separate UART serial ports through a single USB Type-C connection. It is built for engineers and makers who need to monitor or control multiple serial devices simultaneously without juggling multiple adapters. The board integrates a USB-to-quad-UART bridge, voltage level shifters, and dedicated ESP32 programming controls, making it a practical tool for embedded development, IoT prototyping, and industrial debugging.
Key Features
- Quad UART bridge: Converts USB data into four independent serial channels for efficient multi-device communication.
- Adjustable voltage levels: Each channel can be set to 1.8V, 3.3V, or 5V logic, matching a broad range of microcontrollers and peripherals.
- ESP32 auto-boot support: Channel B includes boot and reset buttons for straightforward ESP32 firmware flashing.
- USB Type-C interface: Provides power and high-speed data transfer with a reversible connector.
- LED indicators: Power, UART activity, and ESP32 status LEDs give clear visual feedback during operation.
- Modular power domains: Onboard LDO regulators supply 5V, 3.3V, and 1.8V for flexible voltage selection.
Specifications Explained
Voltage range (1.8V, 3.3V, 5V): This means you can interface with modern low-voltage sensors, common 3.3V microcontrollers, and 5V legacy devices without adding external level shifters. Each channel's voltage is selected independently, so mixed-voltage systems can be connected at the same time.
ESP32 auto-boot support: The dedicated boot and reset buttons on channel B allow you to put an ESP32 into programming mode and reset it without manually wiring buttons or pulling pins. This streamlines firmware uploads and debugging.
USB Type-C power interface: The board draws power from the USB-C connection and communicates with your computer at high speed. The included USB-C cable means you can connect it to any standard USB port.
Indicator LEDs: Power, UART, and ESP32 status LEDs help you confirm that the board is powered, data is flowing, and the ESP32 is in the correct state.
Compatibility and Requirements
The converter works with any host computer that supports USB serial communication. It is compatible with devices operating at 1.8V, 3.3V, or 5V logic levels. For ESP32 programming, the board provides the necessary boot and reset controls on channel B. No additional software is included; you will need a serial terminal or programming tool of your choice. The included JST XH cables mate with the board's connectors, but you may need to prepare your own wiring for connection to target devices.
Typical Uses
- Embedded system development and debugging
- ESP32 firmware programming and testing
- Industrial automation and multi-UART monitoring
- IoT and smart device prototyping
- Serial data logging from multiple sensors or modules
What's in the Box
- 1 x Quad Channel USB to UART Converter Board
- 3 x 4-Pin JST XH Connector with Cable
- 1 x 6-Pin JST XH Connector with Cable
- 1 x USB Type-C Cable

Quick specs
- Voltage Range (V)
- 1.8V, 3.3V, 5V
- Main control (MCU)
- ESP32 Auto-Boot Support
- Power Interface
- USB Type-C
- Indicator
- Power, UART, ESP32 Status LEDs
- Shipping Weight
- 0.06 kg
- Shipping Dimensions
- 17 × 11 × 6 cm
















