
1 / 4 · Click to enlarge
AI Summary
This Gigabit PoE splitter delivers 5V 3A power and 1000 Mbps data to Micro USB or USB-C devices over one Ethernet cable. The included adapter lets you switch between Micro USB and USB-C without extra hardware.
Key Highlights
- 2-in-1 output: Micro USB male plus Micro USB female to USB-C male adapter
- 5V 3A output powers Raspberry Pi 3/4 and security IP cameras
- Gigabit data transfer up to 10/100/1000 Mbps
- IEEE 802.3af/at PoE input, DC38~57V
- Supports 1/2(+),3/6(-) and 4/5(+),7/8(-) power pins
- No extra power cables needed
Ideal For
- Raspberry Pi 3/4 users needing remote power and data
- Security IP camera installers
- Makers building PoE-powered USB-C projects
- Network technicians simplifying cable runs
Buying Tip
Confirm your PoE switch or injector supports IEEE 802.3af/at and that your device's power draw stays within the 15W (5V 3A) output limit.
Elecvora expert review
Our verdict
The UCTRONICS U6271 is a straightforward PoE splitter that does one job well: delivering 5V 3A power and Gigabit data to Micro USB or USB-C devices over Ethernet. Its 2-in-1 design and wide pin support make it a versatile choice for Raspberry Pi and IP camera projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual Micro USB and USB-C output via included adapter
- Gigabit data rate for fast networking
- 15W output suitable for many small devices
- Supports both common PoE pin configurations
Cons
- Requires a PoE source (switch or injector) not included
- Output limited to 5V, so devices needing higher voltage are not supported
- No package contents beyond the splitter and adapter are specified
Best for
Raspberry Pi 3/4 and IP camera installations with PoE infrastructure
Not ideal for
Devices requiring more than 15W or non-5V power
Specifications
| Manufacturer | Generic |
|---|---|
| Operating Power | DC38~57V IEEE 802.3af/at PoE |
| Output Power (W) | 15 |
| Data Output Port | RJ45 Male |
| Power Output Ports | Micro USB male port; Micro USB female to USB-C male port. |
| Data Transfer Rate | 10/100/1000 Mbps |
| Power Pin | support 1/2(+),3/6(-); 4/5(+),7/8(-) |
| Model No. / Name | Interface Adapter |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x UCTRONICS U6271 Gigabit PoE Splitter 5V 3A, 2-in-1 PoE to USB-C/Micro USB Adapter
Frequently Asked Questions
What PoE standard does this splitter support?
Can I use it with both Micro USB and USB-C devices?
What is the maximum power output?
Does it support Gigabit Ethernet?
What is included in the box?
Do I need a separate power cable?
Overview
The UCTRONICS U6271 is a Gigabit PoE splitter designed to separate power and data from a single Ethernet cable. It accepts IEEE 802.3af/at PoE input and provides a regulated 5V 3A output through a Micro USB male connector. A Micro USB female to USB-C male adapter is included, giving you the flexibility to power either Micro USB or USB-C devices without buying a separate splitter. The data output is an RJ45 male port that supports 10/100/1000 Mbps, so network connectivity is maintained alongside power delivery.
Key Features
- Dual output compatibility: Use the built-in Micro USB male port directly, or attach the included adapter to convert it to USB-C male.
- Stable 5V 3A power: Provides up to 15W output, suitable for powering Raspberry Pi 3/4 boards and security IP cameras.
- Gigabit data throughput: Supports 10/100/1000 Mbps for fast network connections.
- Wide PoE input range: Operates from DC38~57V and complies with IEEE 802.3af/at standards.
- Flexible pin support: Works with both 1/2(+),3/6(-) and 4/5(+),7/8(-) power pin configurations.
- No extra power cables: Simplifies installation by delivering both power and data over the existing Ethernet cable.
Specifications Explained
Operating Power (DC38~57V IEEE 802.3af/at): This range covers standard PoE voltages, so the splitter can accept power from common PoE switches and injectors. Output Power (15W): The 5V 3A output provides enough current for many small network devices, but check your device's power requirements to ensure it stays within the 15W limit. Data Transfer Rate (10/100/1000 Mbps): The splitter passes through Gigabit Ethernet, so it will not bottleneck fast network connections. Power Pin Support: Compatibility with both common pinouts means the splitter can work with a wider range of PoE equipment without needing a crossover cable or adapter.
Compatibility and Requirements
The U6271 is designed for devices that accept 5V power via Micro USB or USB-C, such as Raspberry Pi 3/4 and security IP cameras. It requires a PoE source that delivers IEEE 802.3af/at power over the Ethernet cable. The data output is RJ45 male, so you will need an Ethernet cable to connect to your device's network port. No additional power cable is needed.
Typical Uses
- Powering a Raspberry Pi 3/4 in a remote location without a nearby mains outlet.
- Supplying power and network connectivity to security IP cameras.
- Deploying USB-C or Micro USB devices in PoE-enabled installations.
- Simplifying setups where only one cable can be run to the device.
What's in the Box
1 x UCTRONICS U6271 Gigabit PoE Splitter 5V 3A, 2-in-1 PoE to USB-C/Micro USB Adapter.
Quick specs
- Manufacturer
- Generic
- Operating Power
- DC38~57V IEEE 802.3af/at PoE
- Output Power (W)
- 15
- Data Output Port
- RJ45 Male
- Power Output Ports
- Micro USB male port; Micro USB female to USB-C male port.
- Data Transfer Rate
- 10/100/1000 Mbps













