
1 / 3 · Click to enlarge
AI Summary
A four-channel charger that runs on 240W AC or up to 600W DC and feeds 0.1-12A into 1-6S LiPo, LiHV, LiIon, NiMH, NiCd and Pb packs. Its biasable power distribution lets you charge several batteries at once or concentrate output on one large pack.
Key Highlights
- Four independent channels charge up to four packs at once
- 240W from AC mains, up to 600W from a DC supply
- 0.1-12A output current per channel, 1-6S cell range
- Supports LiPo, LiHV, LiIon, NiMH, NiCd and Pb chemistries
- Integrated balance ports for cells that need balancing
- 32-bit ARM chip with over-current, over-voltage and thermal protection
Ideal For
- RC car racers charging several packs between heats
- FPV and drone pilots preparing a batch of flight batteries
- Helicopter flyers running mixed battery chemistries
- Hobbyists who want one charger for both bench and field use
- Multi-model owners who need four packs charging at once
Buying Tip
Check that your DC power supply can deliver the current you need before relying on the 600W DC mode, and confirm your packs fall within the 1-6S range.
Elecvora expert review
Our verdict
The UP11 makes sense for anyone tired of charging packs one at a time, combining four channels, a wide chemistry list and AC or DC input in a single compact unit. Its biasable power distribution is the standout detail, letting you concentrate output when you only need one pack charged quickly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four channels cut charging queues significantly
- AC and DC input covers home and field use
- Broad chemistry support from LiPo to Pb
- Balance ports and multiple protection layers built in
Cons
- 600W output requires a separate DC supply
- No package contents beyond the charger are listed
- Large packs may still be limited by total available power
Best for
Hobbyists charging several packs per session across different models
Not ideal for
Buyers who only ever charge one small battery at a time
Specifications
| Output Voltage | 1–6S |
|---|---|
| Output Current (A) | 0.1 – 12 |
| Battery cell type | LiPo/LiHV/LiIon/NiMH/NiCd/Pb |
| Output Power (W) | 600W, 240W |
| Length (mm) | 120 |
| Width (mm) | 130 |
| Weight (g) | 1007 |
| Shipping Weight | 1.3 kg |
| Shipping Dimensions | 14 × 24 × 8 cm |
What's in the box
- 1 x Ultra Power UP11 AC 240W / DC 600W Quad-Channel 1-6S Multi-Chemistry Battery Charger
Frequently Asked Questions
How many batteries can the UP11 charge at once?
Which battery chemistries are supported?
What is the difference between the AC and DC ratings?
How much current can each channel deliver?
Does it balance battery cells?
What safety protections are included?
Overview
The Ultra Power UP11 is a multi-chemistry charger with four output channels, designed for hobbyists who would rather charge a full set of packs in one session than queue them through a single port. It can draw power from an AC mains outlet at 240W or from a DC source at up to 600W, so the same unit works on the bench at home and from a larger DC supply in the field.
Each channel covers 1-6S packs and adjusts output current between 0.1A and 12A. Power distribution can be biased between channels, which means a single large pack can receive more of the available output when the other bays are free.
Key Features
- Quad-channel output: charge up to four batteries simultaneously instead of one after another.
- Dual input power: 240W on AC, up to 600W on DC for faster sessions with a suitable supply.
- Wide chemistry support: LiPo, LiHV, LiIon, NiMH, NiCd and Pb packs are all handled.
- Balancing built in: integrated balance ports serve chemistries that require cell balancing.
- ARM-based control: a 32-bit ARM chip manages the charging process and protection logic.
- Layered safety: over-current, over-voltage, short-circuit, thermal and reverse-polarity protection, plus flame-retardant materials.
Specifications Explained
Power and current
The 240W AC rating sets what the charger can pull from a wall socket; the 600W DC rating is the higher ceiling when you connect an external DC supply. Output current is adjustable from 0.1A to 12A per channel, so small receiver packs can be charged gently while larger flight packs take more current.
Cell count and chemistry
The 1-6S range covers common RC packs from single-cell up to six cells in series. Because the charger also supports LiHV, LiIon, NiMH, NiCd and Pb, one unit can serve several models with different battery types.
Size and weight
At 120mm long, 130mm wide and about 1007g, the UP11 is compact enough for a pit box while staying stable on the bench.
Compatibility and Requirements
The charger works with 1-6S LiPo, LiHV, LiIon, NiMH, NiCd and Pb batteries. It needs either an AC mains outlet or a DC power source to operate. Batteries that require balancing should be connected through the integrated balance ports.
Typical Uses
The four channels suit RC car racers rotating through several packs, drone and FPV pilots charging a batch of flight batteries, and helicopter flyers who run different chemistries across their models. The AC/DC flexibility makes it useful both at home and at the field with a DC supply.
What's in the Box
- 1 x Ultra Power UP11 AC 240W / DC 600W Quad-Channel 1-6S Multi-Chemistry Battery Charger
Quick specs
- Output Voltage
- 1–6S
- Output Current (A)
- 0.1 – 12
- Battery cell type
- LiPo/LiHV/LiIon/NiMH/NiCd/Pb
- Output Power (W)
- 600W, 240W
- Length (mm)
- 120
- Width (mm)
- 130



















