Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-channel charger that puts 1400W and up to 28A into each of two 6-14S LiPo or LiHV packs at the same time. Balance and storage modes plus a 3.2-inch LCD make large-pack charging faster and easier to manage.

Key Highlights

  • Dual channels deliver 2x1400W for simultaneous charging of two packs
  • Up to 28A charge current with selectable 10A, 15A, 20A, 25A and 28A steps
  • Supports 6-14S LiPo, LiHV and intelligent cell chemistries
  • Balance charging at up to 1500mA per cell for pack health
  • Storage mode plus overcurrent, overvoltage and over-temperature protection
  • 3.2-inch LCD for clear settings and charge progress

Ideal For

  • Commercial drone operators rotating multiple large flight packs
  • Heavy-lift and industrial UAV teams using 12S and 14S batteries
  • Hobbyists flying large 6S-and-above multirotors
  • Drone service and maintenance workshops managing customer packs
  • FPV and cinematic crews who need fast turnaround between flights

Buying Tip

Check that your charging setup has an AC 220V supply and that your packs and charge leads match the 6-14S range before ordering, since neither is included.

Elecvora expert review

Our verdict

The UP2800 is a serious dual-channel charger for people who own large 6-14S packs and are tired of charging them one at a time. Its 2x1400W output and 28A ceiling make it a workflow tool rather than a casual hobby charger.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two 1400W channels charge two large packs simultaneously
  • Up to 28A current with useful stepped settings
  • 6-14S coverage for high-cell-count LiPo and LiHV packs
  • Balance, storage modes and a protection suite included

Cons

  • Requires an AC 220V supply, which rules out 110V mains without a step-up solution
  • Discharge power is limited to 140W total
  • Charge leads and batteries are not included

Best for

Operators of large 6-14S drone packs who need two batteries charging at once

Not ideal for

Pilots of small 1-4S packs or anyone on a 110V mains supply

Specifications

Charging Power (W)2800 (1400x2)
Discharging Power (W)140 (70x2)
Power Rating2×1400W
Input Voltage (VAC)AC 220V
Current Rating (A)28A
Charge Current Range (A)10A/15A/20A/25A/28A
Balance Current(mA)Max.1500mA/cell
Supported Cell ChemistryLiPo, LiHV, Intelligent Cell Chemistry
Channels2, 1
Charging ModeBalance Charging Mode/Storage Mode
Operating Temperature (°C)0-40℃
Storage Temperature (°C)-20-60°C
Length (mm)303
Width (mm)262
Shipping Weight7.91 kg
Shipping Dimensions44 × 33 × 22 cm

What's in the box

  • 1 x Ultra Power UP2800 2X1400W 28A Dual-Channel 6-14S LiPo/LiHV Drone Battery Charger
  • 1 x Power Board
  • 1 x 6-14S Balance Board
  • 1 x Instruction Manual

Frequently Asked Questions

Can the UP2800 charge two batteries at the same time?
Yes. It has two channels, each rated to 1400W and up to 28A, so two packs can be charged simultaneously.
Which battery types and cell counts does it support?
It supports LiPo, LiHV and intelligent cell chemistries in the 6-14S range.
What input voltage does the charger need?
It is rated for AC 220V input. Check your mains supply before use, as lower-voltage mains will not suit it directly.
What current settings can I choose?
Charge current is selectable in steps of 10A, 15A, 20A, 25A and 28A.
Does the box include charge leads or batteries?
No. The package contains the charger, a power board, a 6-14S balance board and an instruction manual. Batteries and charge leads are not included.
How should I store the charger when not in use?
Keep it within the stated storage range of -20 to 60 degrees Celsius and away from moisture and physical damage.

Overview

The Ultra Power UP2800 is a two-channel charging station aimed at operators of large drone battery packs. Where a single-channel charger forces you to queue packs one after another, the UP2800 runs two channels at once, each rated to 1400W and up to 28A. That combination is what makes it practical for 6-14S LiPo and LiHV packs, which hold a lot of energy and take time to refill at lower power levels.

Control is straightforward: choose a charge current from the fixed steps, start balance charging, and follow progress on the 3.2-inch LCD. A storage mode is included for packs that will sit unused for a while, and protection circuits cover overcurrent, overvoltage and over-temperature conditions.

Key Features

  • Dual-channel output: 2x1400W total charging power, with both channels able to work at the same time.
  • High current range: selectable 10A, 15A, 20A, 25A or 28A charging.
  • Wide cell count: designed for 6S through 14S LiPo, LiHV and intelligent cell chemistries.
  • Balance charging: balancing current up to 1500mA per cell.
  • Storage mode: brings packs to a holding state when they will not be flown soon.
  • Protection suite: overcurrent, overvoltage and over-temperature safeguards.

Specifications Explained

1400W per channel is the headline figure. With two channels, the charger can push serious power into large packs, which shortens the gap between flights for teams that rotate several batteries. 28A is the top of the current range; the stepped settings let you choose a lower rate when a pack or workflow calls for it rather than always running at maximum.

6-14S support covers the high-voltage packs used on larger airframes. 1500mA per cell balancing helps keep individual cells aligned during and after charging. The 140W discharge rating (70W per channel) is modest compared with the charge side, so treat discharging as a supporting function rather than a fast process. Input is AC 220V, and the unit is rated for operation between 0 and 40 degrees Celsius.

Compatibility and Requirements

The UP2800 works with LiPo, LiHV and intelligent cell chemistries in the 6-14S range. It requires an AC 220V supply, so confirm your mains voltage before connecting. Balance leads connect through the supplied 6-14S balance board, and a power board is included in the package. Charge leads and the batteries themselves are not part of the box contents.

Typical Uses

Commercial drone teams can charge two flight packs side by side between missions. Heavy-lift and industrial UAV operators running 12S and 14S packs benefit from the high cell count and power headroom. Hobbyists with large 6S-and-above models can use one channel for charging and keep the second free for a second pack or a storage cycle.

What's in the Box

  • 1 x Ultra Power UP2800 dual-channel charger
  • 1 x Power board
  • 1 x 6-14S balance board
  • 1 x Instruction manual

Quick specs

Charging Power (W)
2800 (1400x2)
Discharging Power (W)
140 (70x2)
Power Rating
2×1400W
Input Voltage (VAC)
AC 220V
Current Rating (A)
28A
Charge Current Range (A)
10A/15A/20A/25A/28A
See all specifications