
1 / 3 · Click to enlarge
AI Summary
Dual-channel 600W-per-channel charger for 2-6S LiPo, LiHV and SemiSolid drone batteries. It charges two packs simultaneously at up to 25A each with balance and storage modes.
Key Highlights
- Dual channels deliver 600W and 25A each
- Supports 2S to 6S LiPo, LiHV and SemiSolid packs
- 1500mA per-cell balance current for pack health
- Balance charge and storage modes selectable
- Independent radio battery port for 2S/3S packs
- Over-voltage, over-current, reverse polarity and over-temperature protection
Ideal For
- Drone pilots who need to charge two large packs at once
- Professional UAV operators managing multiple battery sets
- FPV pilots using 6S LiPo or LiHV packs
- Hobbyists with 2S to 6S SemiSolid batteries
- Users who want a built-in radio battery charging port
Buying Tip
Confirm that your battery's balance connector matches the included XH adaptor boards and that your power source can supply the charger's AC input requirements.
Elecvora expert review
Our verdict
The Ultra Power UP600+ is a capable dual-channel charger with high power per channel and broad chemistry support, making it a solid choice for drone users who value parallel charging. Its protection features and storage mode add practicality for regular battery maintenance.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 600W and 25A per channel for fast charging
- Supports LiPo, LiHV and SemiSolid chemistries
- Strong 1500mA balance current
- Independent radio battery port adds convenience
Cons
- Only one radio battery can be charged at a time
- No DC input option listed, so it relies on AC power
- Requires suitable balance connectors and adaptors
Best for
Drone operators who need to charge two high-capacity packs simultaneously
Not ideal for
Users with only small 1S or 2S batteries who don't need high power
Specifications
| Charging Power (W) | 1200 (600x2) |
|---|---|
| Discharging Power (W) | 80 (40x2) |
| Power Rating | 600W |
| Current Rating (A) | 25A |
| Supported Cell Chemistry | LiPo, LiHV, SemiSolid |
| Supported Cell Series | 2–6 S |
| Channels | 2, 1 |
| Input Voltage (VAC) | AC 110V/220V |
| Balance Current(mA) | 1500mA/cell |
| Charging Mode | balance charging mode / storage mode |
| Dimensions (L x W x H) mm | 268x140x127mm |
| Shipping Weight | 4.125 kg |
| Shipping Dimensions | 40 × 20 × 20 cm |
What's in the box
- 1 x Ultra Power UP600+ 2X600W 25A Dual-Channel 2-6S LiPo/LiHV Drone Battery Charger
- 2 x XH Adaptor Board
- 1 x Power Cord
- 1 x Instruction Manual
Frequently Asked Questions
What battery chemistries does the UP600+ support?
Can I charge two batteries at the same time?
What is the maximum charging current per channel?
Can I charge a radio transmitter battery with this charger?
What input voltage does the charger require?
What is included in the box?
Overview
The Ultra Power UP600+ is a dual-channel battery charger designed for drone operators who want to charge two packs at once without compromising on power. Each channel can deliver up to 600W and 25A, and the charger supports 2S to 6S LiPo, LiHV and SemiSolid batteries. A 1500mA per-cell balance current helps keep cells aligned during charging, while balance charge and storage modes give you control over pack condition. The charger also remembers the last charging current you set, so repeat sessions are quicker to start.
Key Features
- Dual-channel output: 600W and 25A per channel for simultaneous charging of two batteries.
- Wide chemistry support: Works with LiPo, LiHV and SemiSolid packs in 2S to 6S configurations.
- Balance and storage modes: Choose balance charging for everyday use or storage mode to bring packs to a safe resting voltage.
- Radio battery port: An independent connection lets you charge a 2S or 3S radio battery (one at a time).
- Protection suite: Over-voltage, over-current, reverse polarity and over-temperature protection are built in.
- Adjustable current: Select 5A, 10A, 15A, 20A or 25A to match your battery and power supply.
Specifications Explained
Charging power: With 600W per channel (1200W total), the UP600+ can charge large drone packs quickly, provided your input power and battery can accept the current. The 25A current limit per channel means you can charge high-capacity packs at higher rates, but always check your battery's recommended charge rate.
Balance current: The 1500mA per-cell balance current is strong enough to help correct imbalances in larger packs, which is useful for maintaining battery health over many cycles.
Discharging power: The 80W (40W per channel) discharge rating is intended for storage mode and gentle discharging, not for high-load cycling.
Input voltage: The charger accepts AC 110V or 220V, so it can be used in different regions without a separate power supply.
Compatibility and Requirements
The UP600+ supports LiPo, LiHV and SemiSolid batteries from 2S to 6S. It is not designed for other chemistries. The radio battery port supports 2S and 3S radio batteries, but only one radio battery can be charged at a time. You will need a suitable AC outlet (110V or 220V) and batteries with compatible balance connectors; two XH adaptor boards are included to help with connection.
Typical Uses
This charger suits drone pilots who need to prepare multiple batteries before a flight session, from recreational flyers to professional UAV operators. The dual channels let you charge two packs in parallel, reducing downtime between flights. Storage mode is handy for preparing packs for longer periods of inactivity, and the radio battery port covers transmitter batteries without a separate charger.
What's in the Box
- 1 x Ultra Power UP600+ 2X600W 25A Dual-Channel 2-6S LiPo/LiHV Drone Battery Charger
- 2 x XH Adaptor Board
- 1 x Power Cord
- 1 x Instruction Manual
Quick specs
- Charging Power (W)
- 1200 (600x2)
- Discharging Power (W)
- 80 (40x2)
- Power Rating
- 600W
- Current Rating (A)
- 25A
- Supported Cell Chemistry
- LiPo, LiHV, SemiSolid
- Supported Cell Series
- 2–6 S



















