
1 / 5 · Click to enlarge
At a glance
Made by Ultra power, this ultra power battery charger is a good fit for RC and FPV hobbyists. Main specs: item type Drone Battery Charger; model no. / name UP600AC DUO; battery cell count 2S – 6S supported. Check that your power source supplies AC 110V / 220V before connecting it.
Key Highlights
- Item Type: Drone Battery Charger
- Model No. / Name: UP600AC DUO
- Battery Cell Count: 2S – 6S supported
Ideal For
- Powering projects and devices
- Spare or replacement pack
- Portable builds
Buying Tip
Match the battery chemistry, voltage and connector to your device, and charge it only with a charger made for that chemistry.
Specifications
| Item Type | Drone Battery Charger |
|---|---|
| Model No. / Name | UP600AC DUO |
| Battery Cell Count | 2S – 6S supported |
| Charging Current | 5A – 25A |
| Balance Current(mA) | 1.5A per Cell |
| Input Voltage | AC 110V / 220V |
| Battery Type | LiPo / LiHV |
| Working Mode | Charge Mode / Storage Mode |
| Length (mm) | 355 |
| Width (mm) | 140 |
| Weight (g) | 3346 |
| Sensor Type | Strain Gauge Based Load Cell |
| Shipping Weight | 4.036 kg |
| Shipping Dimensions | 36 × 20 × 20 cm |
Overview
The Ultra Power UP600AC DUO 2X600W 5A-25A Dual-Channel 2-6S LiPo/LiHV Drone Battery Charger, made by Ultra power, is listed in our ultra power battery charger range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Drone Battery Charger (note the battery type so you can order spares or the right charger)
- Model No. / Name: UP600AC DUO
- Battery Cell Count: 2S – 6S supported (note the battery type so you can order spares or the right charger)
- Charging Current: 5A – 25A (check which plug or cable it needs)
- Balance Current(mA): 1.5A per Cell (your supply must deliver at least this much current)
- Input Voltage: AC 110V / 220V (match this to your power supply; too high a voltage can damage the part)
- Battery Type: LiPo / LiHV (note the battery type so you can order spares or the right charger)
- Working Mode: Charge Mode / Storage Mode (space for firmware, files or media)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Ultra Power UP600AC DUO is a high-performance dual-channel charger designed for LiPo and LiHV drone batteries. It allows simultaneous charging of two battery packs with independent 600W output per channel, making it ideal for professional drone pilots and RC enthusiasts. The charger supports 2-6S batteries and offers adjustable charging current from 5A to 25A for flexible power management. With built-in balance charging and storage mode, it helps extend battery life while maintaining optimal performance.
Safety is prioritized through multiple protection features including short-circuit, reverse polarity, and overheat protection. The intelligent design includes easy-to-use controls, status indicators, cooling fans, and XT90 battery ports. Its durable construction and powerful 1200W combined output make it a reliable charging solution for drones, RC aircraft, and other high-capacity LiPo battery applications.
Features:
- Dual-channel charger supports simultaneous charging of two batteries.
- Compatible with 2S–6S LiPo and LiHV battery packs.
- High 1200W total charging power (600W per channel).
- Adjustable charging current from 5A to 25A.
- Built-in balance charging for stable cell voltage management.
- Includes storage mode to maintain battery health.
- Multiple safety protections including reverse polarity and overheat protection.
- Integrated cooling fans and clear status indicators for safe operation.
Package Includes:
1 x Ultra Power UP600AC DUO 2X600W 5A-25A Dual-Channel 2-6S LiPo/LiHV Drone Battery Charger
1 x Accessory Set
1 x Manual
Quick specs
- Item Type
- Drone Battery Charger
- Model No. / Name
- UP600AC DUO
- Battery Cell Count
- 2S – 6S supported
- Charging Current
- 5A – 25A
- Balance Current(mA)
- 1.5A per Cell
- Input Voltage
- AC 110V / 220V



















