
1 / 4 · Click to enlarge
AI Summary
This board merges an ATmega328P and an ESP8266 with 4MB flash, letting you build WiFi-enabled Arduino projects without stacking shields. DIP switches let you run each chip independently or connect them for serial communication.
Key Highlights
- Dual microcontrollers: ATmega328P and ESP8266 with 4MB flash
- DIP switches select independent or combined operation modes
- CH340G USB-to-serial for programming both chips via micro USB
- 14 digital I/O and 6 analog input pins on the Uno side
- Wide 9-24V DC input via VIN or barrel jack
- Compact 70 x 53.5 mm board weighing only 25 g
Ideal For
- IoT developers building WiFi-connected sensor nodes
- Arduino enthusiasts wanting to add wireless capability without shields
- Students learning about dual-microcontroller communication
- Makers prototyping home automation systems
- Engineers needing a compact board for remote data logging
Buying Tip
Remember to set the DIP switches correctly before uploading code; incorrect switch positions are a common cause of upload failures.
Elecvora expert review
Our verdict
The Uno+WiFi R3 is a practical solution for makers who need both an Arduino Uno and WiFi in a single board. It offers good flexibility with DIP switches and separate pinouts, but as a clone, it lacks official support and may require troubleshooting.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated ATmega328P and ESP8266 save space and wiring
- DIP switches allow flexible operating modes
- CH340G provides easy USB programming for both chips
- Wide input voltage range and extended temperature range
Cons
- Clone board with no official warranty or support
- Requires CH340G drivers and careful DIP switch configuration
- Limited documentation compared to official Arduino boards
Best for
Makers and IoT developers needing a compact dual-chip board for WiFi projects.
Not ideal for
Users who require official Arduino support, warranties, or guaranteed long-term reliability.
Specifications
| Item Type | Development Board |
|---|---|
| Board Type | Uno |
| Chip Type | ATmega328P |
| Input Voltage (V) | 3.3 ~ 5 |
| Current consumption | 800 |
| USB-to-Serial Converter | CH340G |
| VIN/DC Jack (V) | 9 ~ 24 |
| WiFi (Y/N) | 802.11 b/g/n 2.4 GHz |
| USB | Micro USB |
| Clock Frequency | 16 |
| Memory Capacity | 4 |
| Length (mm) | 70 |
| Width (mm) | 53.5 |
| Weight (g) | 25 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 10 × 10 × 5 cm |
What's in the box
- 1 x Uno+WiFi R3 ATmega328P+NodeMCU ESP8266 4MB Development Board
Frequently Asked Questions
How do I program the ESP8266 on this board?
Can I use the ATmega328P and ESP8266 at the same time?
What is the input voltage range?
Is this an official Arduino board?
What is included in the package?
What drivers are needed for the USB connection?
Overview
The Uno+WiFi R3 is a development board that integrates two popular microcontrollers: an ATmega328P (the same chip used in classic Arduino Uno boards) and an ESP8266 WiFi module with 4MB of flash memory. This combination lets you add wireless connectivity to projects without using shields or external modules. The board follows the Uno form factor and provides separate pin headers for each chip, so you can connect peripherals to either one. A set of DIP switches on the board controls how the two chips interact: they can run completely independently, or the ATmega328P can communicate with the ESP8266 over serial, or the USB port can be routed to either chip for programming. This flexibility makes the board suitable for a wide range of applications, from simple sensor readings to cloud-connected IoT devices.
Key Features
- Dual-chip architecture: ATmega328P and ESP8266 on one PCB, each with its own pinout.
- DIP switch mode selection: Easily switch between independent operation, USB-to-ATmega, USB-to-ESP8266, or ATmega-to-ESP8266 communication.
- CH340G USB-to-serial converter: Program both microcontrollers through the micro USB port without external adapters.
- 4MB flash on ESP8266: Enough space for WiFi firmware and sketches.
- Arduino Uno R3 compatible footprint: Accepts many Uno shields and accessories.
- Wide input voltage range: 9-24V DC via VIN or barrel jack, with 5V logic level.
Specifications Explained
ATmega328P: An 8-bit AVR microcontroller running at 16 MHz, with 14 digital I/O pins (6 of which can be PWM outputs) and 6 analog inputs. It handles real-time control tasks and is compatible with the Arduino IDE.
ESP8266: A 32-bit microcontroller with integrated 2.4 GHz WiFi (802.11 b/g/n). It has 4MB of flash memory for storing sketches and data. It can be programmed separately or used as a WiFi co-processor for the ATmega328P.
CH340G: A USB-to-serial chip that allows your computer to communicate with either microcontroller via the micro USB port. Drivers may be required on some operating systems.
Power: The board can be powered via the micro USB port (5V, 500mA max) or through the VIN pin or DC jack with 9-24V. The onboard regulator provides the necessary voltages for both chips.
Logic level: 5V, which is standard for Arduino Uno compatibility. Ensure connected peripherals are compatible with 5V logic or use level shifters.
Compatibility and Requirements
The board is compatible with the Arduino IDE for programming the ATmega328P. For the ESP8266, you will need to install the ESP8266 board package in the Arduino IDE or use other development environments. A micro USB cable is required for programming and power. Drivers for the CH340G may be needed on Windows, macOS, or Linux. The board operates over a wide temperature range of -40°C to +125°C, making it suitable for harsh environments. Note that this is a clone board and not an official Arduino product; community support and documentation may vary.
Typical Uses
- IoT sensor nodes that collect data and send it over WiFi.
- Home automation projects requiring local control and wireless connectivity.
- Wireless data loggers using the ESP8266 for cloud uploads.
- Prototyping projects that need both an Arduino Uno and WiFi without stacking shields.
- Educational projects to learn about dual-microcontroller communication.
What's in the Box
1 x Uno+WiFi R3 ATmega328P+NodeMCU ESP8266 4MB Development Board.
Quick specs
- Item Type
- Development Board
- Board Type
- Uno
- Chip Type
- ATmega328P
- Input Voltage (V)
- 3.3 ~ 5
- Current consumption
- 800
- USB-to-Serial Converter
- CH340G













