Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This multi-brand electronic components kits is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name UNO R3 Starter Kit; board 400-hole solderless type(Breadboard); components LED, Diode, Capacitor, Buzzer, Jumper Wires,etc.

Key Highlights

  • Model No. / Name: UNO R3 Starter Kit
  • Board: 400-hole solderless type(Breadboard)
  • Components: LED, Diode, Capacitor, Buzzer, Jumper Wires,etc

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameUNO R3 Starter Kit
Board400-hole solderless type(Breadboard)
ComponentsLED, Diode, Capacitor, Buzzer, Jumper Wires,etc
CompatibilityArduino IDE, Microcontroller Boards
Storage CapacityDurable plastic box
ColorRed, Green, Yellow, Blue
Shipping Weight0.1 kg
Shipping Dimensions13 × 7 × 4 cm

Overview

The UNO R3 capacitive 400-hole starter kit including breadboard ,LED, humming diode buzzer is listed in our multi-brand electronic components kits range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: UNO R3 Starter Kit
  • Board: 400-hole solderless type(Breadboard)
  • Components: LED, Diode, Capacitor, Buzzer, Jumper Wires,etc
  • Compatibility: Arduino IDE, Microcontroller Boards (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Storage Capacity: Durable plastic box (space for firmware, files or media)
  • Color: Red, Green, Yellow, Blue
  • Shipping Weight: 0.1 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 13 × 7 × 4 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The UNO R3 capacitive 400-hole starter kit is an ideal beginner-friendly electronics kit designed for learning, prototyping, and experimenting with circuits. It includes an UNO R3 compatible microcontroller board, a 400-point breadboard, LEDs, resistors, diodes, capacitors, header pin and a buzzer — everything you need to start your journey into electronics without soldering.

Perfect for students, hobbyists, and makers, this kit provides hands-on experience with basic electronic components and circuit design. Each component is organized in a durable storage box, ensuring easy access and quick project setup. The kit helps users understand microcontroller programming, signal control, and real-world interfacing applications effectively. Build, test, and innovate — all in one box with this all-in-one starter kit!

Note: Images for Referance only, the actual product may vary in terms of Colour

Features:

  1. Complete electronics starter kit for UNO R3 users.
  2. 400-hole breadboard allows easy circuit prototyping.
  3. Includes LEDs, resistors, diodes, and capacitors.
  4. Plug-and-play design — no soldering required.
  5. Compatible with Arduino IDE and sensors.
  6. Durable components ideal for repeated use.
  7. Organized in a reusable plastic storage box.
  8. Perfect for students, DIYers, and beginners.

Package Includes:

1 x UNO R3 capacitive 400-hole starter kit including breadboard ,LED, humming diode buzzer Packaging List:

10 x 2k Ohm Resistor

10 x 1k Ohm Resistor

10 x 220 Ohm Resistor

10 x 330 Ohm Resistor

10 x 10 Ohm Resistor

10 x 5.1k Ohm Resistor

10 x 100 Ohm Resistor

10 x 10k Ohm Resistor

10 x 100k Ohm Resistor

10 x 1M Ohm Resistor

1 x Solderless Breadboard

1 x 40Pin Header Pin

1 x Jumper Wire Set

1 x LED Pack(Red-10, Green-10, Blue-10, Yellow-10)

10 x 100uF 50V Electrolytic Capacitor

10 x 10uF 25V Electrolytic Capacitor

20 x 0.1uF Ceramic Disk Capacitor

22 x 22pF Ceramic Disk Capacitor

8 x Button Cap(Red-2, White-2, Blue-2, Yellow-2)

6 x tactile push-button switch

1 x RGB LED

1 x AC Passive Buzzer

1 x Active Electromagnetic Buzzer

1 x Potentiometer

1 x Plastic Box

Quick specs

Model No. / Name
UNO R3 Starter Kit
Board
400-hole solderless type(Breadboard)
Components
LED, Diode, Capacitor, Buzzer, Jumper Wires,etc
Compatibility
Arduino IDE, Microcontroller Boards
Storage Capacity
Durable plastic box
Color
Red, Green, Yellow, Blue
See all specifications